The introduction of -fno-common caused a link error in eswifi driver due
to lack of missing extern on eswifi_bus_ops_spi. Adding the extern
resolves the link error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To enable the QSPI you have to physically modify the board and this
disables the hyperflash. Since we plan on removing Kconfig from device
trees, its easier to treat the QSPI flash as a seperate board config and
thus it will get a dts to match.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are cases in which we get the parents compat and thus we might
have a binding available for the actual node. An example is having a
SPI or I2C controller with a child node, but that node doesn't have a
binding associated with it. We'll end up getting the parent compat, so
return the parent binding in this case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Valgrind reported this:
==14823== Invalid read of size 4
==14823== at 0x113FB9: memcpy (string_fortified.h:34)
==14823== by 0x113FB9: ethernet_fill_header (ethernet.c:483)
==14823== by 0x113FB9: ethernet_send (ethernet.c:588)
==14823== by 0x116720: net_if_tx (net_if.c:173)
==14823== by 0x116720: process_tx_packet (net_if.c:211)
==14823== by 0x10FDB6: z_work_q_main (work_q.c:32)
==14823== by 0x10FD55: _thread_entry (thread_entry.c:29)
==14823== by 0x111CF7: posix_thread_starter (posix_core.c:301)
==14823== by 0x49673BC: start_thread (pthread_create.c:463)
==14823== by 0x4A78E15: clone (clone.S:108)
==14823== Address 0x87822a6 is in a rw- anonymous segment
The issue is that we had a pointer that pointed to local stack
variable and that pointer was used to access stuff after the
test function had returned.
Fixes#12006
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Both "store" and "clear" are verbs, so putting them after each other
is just confusing. Use "clean" consistently when clearing settings
entries.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The pdelay_allowed_lost_resp_exceed_count was updated even if we
had received pdelay response.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. Modified fade_led PWM example to include
nRF HW PWM option.
2. Added fade_led nrf52_pca10040.overlay
in order to enable PWM node and choose
output PWM GPIO for channel 0. Channel 1
GPIO enable but not used in sample src.
Signed-off-by: Gaute Gamnes <gaute.gamnes@nordicsemi.no>
1. PWM device node added with alias to all
nRF52x DTSI files. 1 instance for
nRF52810, 3 instances for nRF52832, and
4 instance for nRF52840.
2. Added yaml binding for Nordic PWM node.
Signed-off-by: Gaute Gamnes <gaute.gamnes@nordicsemi.no>
Convert lis2mdl magnetometer driver to get the device name as well
as i2c slave information from device tree. Updates the build_all
test accordingly.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
All IPv4 destination address related drop reasons in one place.
This helps also to have one unique call of net_conn_input().
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for IPv4, net_conn_input() can be called at one place for udp/tcp.
It will anyway check if given protocol is enabled so no need to check
such support here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was weird to pre-parse ICMPv6 headers in IPv6. Moreover parsing
failure of such header would not generate the right statistic.
Instead, centralizing all into net_icmpv6_input relevantly, and adapting
the test cases which were using that function. In RPL test, removing the
dummy dio test was simpler since dio is anyway tested later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This test can be on the boarder line with systems that only have 128K of
flash. Limit it systems with more for now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Increase the net_buf length in proper places. So when gPTP
header is added, increase the buf->len properly, and then
when gPTP packet type is added, increase it again properly.
This way the net_buf length is updated in more logical way.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We were reading gPTP header from wrong position when parsing
it in RX and TX.
Fixes#11827
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixed#11980, a bug where a build failure occured when 'python' was
not on path.
There was a bug in the implementation where it failed to detect that
'python' was not on path. This is now fixed.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The Code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The Code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added BT alisa for dumping binary data to the logg.
The macro will be useful for BT as reworked settings supports r/w of
raw data - which will be widely leveraged in bluetooth storage alignment
to reworked settings.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
So far to deleting av existing key-value pair it was
required to storing NULL value using setting_save_one().
This patch introduce more intuitive API which takes only
the name key string.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Such API is convinient for check the persistent storage
value size or whether the value is NULL.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since it is possible to test back-end with base64 and without
test suite should be extended.
This patch introduce tests with and without base64 encoding
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since it is possible to test back-end with base64 and without
test suite should be extended.
This patch introduce tests with and without base64 encoding
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Thanks to previous commit base64 encoding of the settings
value is not required anymore for NFFS and FCB back-end.
This patch makes encoding an option in case it will be required
in the future.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduction of stream-style encoding required tests reworks.
Test for checking especially byte-string encoding is not required
anymore as any value is kept as byte-string.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch reworks routines used to store and read the settings data.
Provide stream-style encoding and decoding to/from flash, so the the
API only requires a pointer to binary data, and the settings
implementation takes care of encoding/decoding to/from base64 and
writing/reading to/from flash on the fly. This would eliminate the
need of a separate base64 value buffer on the application-side, thereby
further contributing to the stack footprint reduction.
Above changes allows to remove:
256-byte value length limitation.
removing enum settings_type usage so all settings data are treated
now as a byte array (i.e. what's previously SETTINGS_BYTES)
Introduced routine settings_val_read_cb for read and decode the
settings data from storage inside h_set handler implementations.
h_set settings handler now provide persistent value's context
used along with read routine instead of immediately value.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The definition of __app_ram_end linker symbol has been
erroneously placed outside the last linker section of
application memory. This commit fixes the problem.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
All text, data and bss sections are all mapped to the same physical
memory (SRAM). This patch removes the individual section limits
and defines a common limit for the sum of text, data and bss sections.
This would make it more flexible for application developers.
Fixes#11268.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Fix references in doxygen comments and enable util.h which has
documentation for references macros in log_core.h
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
