This commit adds a new hardware info API.
With this API it is possible to read out the device ID.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Somehow these were getting generated as `FLASH_foo_BLOCK_SIZE` even
though there's no specification for them in the original yaml. Put them
back until we can figure out what's going on.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
In #9717, 777407b9ea
coverage support was broken for all NATIVE_APPLICATION except
native_posix
This includes the nrf52_bsim board
Fix it.
Fixes: #13009
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Replaced forever loop in assert with call to a function.
In post_assert_action() function, k_panic is called.
Forever loop was preventing logs to be printed and had behavior
ependent on the context (low prioriy thread - system continue to
ork, irq - system is blocked).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
During regression testing of PA/LNA feature it was noticed
that compilation failed due to missing port of the code
conditionally compiled for PA/LNA feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
pyocd 0.14.0 merged its command-line tools into a unified pyocd tool
with subcommands. The separate command-line tools still remain, but are
deprecated. Update the pyocd runner to use the new unified pyocd tool
with subcommands.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The disco_l475_iot1 board should be using CONFIG_USB_DC_STM32 as the
Kconfig sybmol.
Also fix a minor typo in a comment in nucleo_f207zg with regards to
CONFIG_USB_DC_STM32
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Troubleshooting paragraph explains case when either
nvs API returns -ETIMEDOUT or MPU faults happens.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
From the driver point of view, monochrome controllers from the ssd16xx
family mostly differ by the amount of row and columns that are
supported. If they support more than 256 rows and/or columns the
corresponding size or position is sent using 2 bytes instead of 1 byte.
This patch therefore adds the width-bits and height-bits DT properties
to make this configurable.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of hardcoding multiple times the display dimensions, use the
values from DT. This still assume 8 rows per page and 8 pixels per
bytes, but that should always be the case for this controller and a
monochrome display.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Very simple test for thread CPU masks. While this is a SMP feature,
the implementation doesn't actually depend on SMP so we can test it
right here in the thread_apis test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This adds a simple implementation of SMP CPU affinity to Zephyr. The
API is simple and doesn't try to invent abstractions like "cpu sets".
Each thread has an enable/disable flag associated with each CPU in the
system, and the bits can be turned on and off (for threads that are
not currently runnable, of course) using an easy three-function API.
Because the implementation picked requires enumerating runnable
threads in priority order looking for one that match the current CPU,
this is not a good fit for the SCALABLE or MULTIQ scheduler backends,
so it currently can be enabled only for SCHED_DUMB (which is the
default anyway). Fancier algorithms do exist, but even the best of
them scale as O(N_CPUS), so aren't quite constant time and often
require significant memory overhead to keep separate lists for
different cpus/sets.
The intended use here is for apps that want to "pin" threads to
specific CPUs for latency control, or conversely to prevent certain
threads from taking time on specific CPUs to leave them free for fast
response.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
STM32 watchdog driver does not support callback which is not expected
by the test. Update to make test able to run on STM32 drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32 specific behavior "IWDG_STM32_START_AT_BOOT" is enabled
by default. As all vendor specific behavior, this is preferred
to be disabled by default and activated at application level,
so application can have better control of the driver.
For instance watchdog test can't run with this setting.
Disable by default.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Now that stm32 watchdog should be configured by device tree,
update dts file of boards declaring watchdog support.
Additionally update doc and yaml files.
Add support on some boards that were used to validate the driver
update:
- disco_l475_iot1
- nucleo_f207zg
- nucleo_f429zi
- nucleo_f746zg
- nucleo_f073rz
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Commit ce7ed18989 moved CONFIG_SRAM_*
so dts_fixup.h needs to be updated for properly generated linker
script.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit fixes the following issues introduced when switching to
the new SPI API in commit e7de85b534:
- the SPI slave operating mode (and support for it) was not properly
selected (the setting was missing in the sample probably because
the old nRF SPI slave driver used in this sample was not checking
the requested mode at all)
- the `txmsg` buffer filled with 0xFF values in the `bt_tx_thread`
function was improperly used afterwards in `spi_send` to transmit
the slave header frame
- the common structures defining buffers for SPI transactions (`tx`
and `rx`) were modified in `spi_send` before the corresponding
semaphore was taken, resulting in data corruption
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert the hci_spi sample to get the SPI and GPIO settings from Device
Tree instead of Kconfig.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use separate bindings for nRF Family SPI Slaves and SPI Masters so that
the properties "csn" and "def-char" can be made required for Slaves
(for Masters such settings are not applicable), and to avoid confusion
between the properties "csn" and "cs-gpios" for Master nodes.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert the HCI SPI driver to get the SPI and GPIO settings from Device
Tree instead of Kconfig. The "zephyr,bt-hci-spi" binding is used as
a common one for this purpose ("st,spbtle-rf" is removed), to take
advantage of the new DT_<COMPAT>_<INSTANCE> generated macros and get
rid of related fixups and aliases.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This allows to place instances of the class one after another in the
linker section.
Fixes#12908
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
USB relies on descriptors and configuration data allocations in
specific sections. This simple test verifies that at least size of the
data is correct.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When under SMP, _current is a macro that indirects to a CPU-specific
address, and that trick won't work until kernel_arch_init() has
returned.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Use the new DT_<COMPAT>_<INSTANCE>_<PROP> defines to instantiate
devices. This commit adds also ability to define individual pin
locations on SoC series that support the feature. Definitions of GPIO
pins assigned to a given location have been moved from soc_pinmap.h file
to board DTS file.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Allow running script locally. For example, on a local tree with local
changes:
./scripts/ci/run_ci.sh -b master -r upstream -l
This will be have the same way as in CI and creates a test manifest
based on changes.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We should not abort if west was initiaized, someone must have
initialized, i.e. locally and everything is already setup for us and
ready to go.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clock ISR would callback into the USB driver before it was initialized
and ready to deal with events. This caused a fault.
Statically initialize the fifo to queue events and process them when the
USB device is initialized to avoid the problem.
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
