Extended shell to be able to process logs in place
(in the context of a log call). In order to achieve that,
shell was extended to support for TX blocking operations. If
CONFIG_LOG_INPLACE_PROCESS is enabled then shell instance
attempts to be initialized in blocking TX mode. If fails to
do so, shell log backend is disabled. If successfully enabled
logs are processed and printed in the context of the call.
Due to that change, user may expirience interleaved output as
shell has no means to multiplex shell output with logger output.
In extreme, huge amount of log messages may prevent shell thread
execution and shell may become unresponsive.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit moves the definition of IRQ_LINE(..) macro from
interrupt.h into nested_irq.c, and adds some inline comments
documenting the use of it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit fixes the issue with excess current being drawn
during sleep due to active HFCLK with external crystal.
Clock-related operations were moved to cable attachmend and
detachment handlers to ensure that HFCLK is not requested
when it's not needed.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Given the device can be enumerated as both legacy and composite, we
always need to provide the payload_data buffer.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In composite mode the request handler buffer is common to all functions,
and its size is defined by CONFIG_USB_COMPOSITE_BUFFER_SIZE.
Given the device is enumerated as composite in runtime mode and
as legacy in download mode, we need to define wTransferSize as
the minimum of the two.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The upload code assumes the buffer to use is the DFU provide one, and
not the one provided by the request handler, which is different in
composite mode.
This is only a theoretical issue, as this function is only executed
once the device has been re-enumerated in legacy mode, but that is a
required step before unifying legacy and composite code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The flash_read() function takes an offset from beginning of the flash.
This patch subtract FLASH_BASE_ADDRESS from the absolute address. This
fixes DFU firmware upload.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With an SPI based flash, CONFIG_FLASH_BASE_ADDRESS is not defined. In
that case it is safe to assume that the base address is 0.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Changes the default code location from internal itcm to external qspi or
hyperflash. Changes the default data location from internal dtcm to
external sdram.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Changes the default code location from internal itcm to external qspi.
Changes the default data location from internal dtcm to external sdram.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We forgot to include the mimxrt1060_evk_hyperflash board variant when
building mcux support for external memories.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new configuration option to mimxrt10{20,60,64}_evk boards to link
data into external sdram. The default remains to link data into internal
data tightly coupled memory (DTCM).
Note that mimxrt1050_evk is not included because it already has support
for linking data into sdram.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
While k_uptime_get() and k_uptime_get32() return time in
milliseconds, they don't need to have millisecond resolution.
Resolution with default Zephyr settings in 10ms.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unlinke nucleo or disco boards, ST-Link Tx/Rx pins used for Virtual
Com Port is not connected to the chip.
Then, console is not available by default and one should use a serial
cable to enjoy console. Adding mention of this fact to the board
documentation and replacing default hello_world example by blinky,
since blinky sample works without any additional hardware.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
It's incorrect behavior to call IRQ_CONNECT() on the
same IRQ line more than once, but only x86 was catching
this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As written originally, the tests assumed that if k_uptime_get_32()
returns times in milliseconds, that it also has millisecond
resolution. That however doesn't have to be the case, and indeed,
default timer interrupt period used by Zephyr is 10ms, and so system
time is incremented in such units. So, instead of "<= 1" tests to
account for timing increment, use "<= FUZZ".
For blocking tests, increase the timeout from previously used 10ms,
so we can reliably tests delays under the conditions described.
Also, enable CONFIG_QEMU_TICKLESS_WORKAROUND. Most other
timing-related tests have this enabled, and it may affect
stability of QEMU testing too.
Fixes: #12994
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit adds support for device id shell command.
Example:
uart:~$ hwinfo devid
Length: 12
ID: 0x1b0320d51485330313420
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
With the new cmake version, we are able to simplify the generation of
the offset object library without using absolute hardcoded paths.
Instead of the hardcoded paths, we now use the generator:
$<TARGET_OBJECTS:${OFFSETS_LIB}>
This is needed to eventually be able to have an arch-out-of-tree build
Signed-off-by: Klaus Petersen <kape@oticon.com>
Each platform is now specifying list of supported power states
as a Kconfig options. Some of the specified states could be
disabled in runtime. As result there is no need for the removed
interface.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
As rx_buf & tx_buf are defined with a NETUSB_MTU size, this cause
that the frames over 1500 bytes can not be received and are discarded.
Secondly, as fragmentation is not supported (for UDP and TCP datagram),
increase NETUSB_MTU to the maximum possible ethernet frame size :1522
Signed-off-by: Nicolas LANTZ <nicolas.lantz@ubicore.net>
In case of Ethernet, if the requested size is larger than MTU and if
AF_UNSPEC is provided, the allocator will need to take into account
the ethernet header size which is not accounted in the MTU.
Other current L2 do not follow that rule as their MTU is based on IP
one (IPv6 most of the time). What they declare as MTU is the full frame
size they handle (minus the FCS for instance in 15.4). So with
AF_UNSPEC, such assumption on L2 header size is unrelevant.
(On 15.4 the header size is variable anyway and cannot be known until
the frame is parsed).
Fixes#12982
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This was forgotten modification as commit 93e5181fbd came in master
though commit 0d519f7bcf was already written.
Thus fixing the missing lock/unlock.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The new Logger subsys uses a very robust formatter function in minimal
libc: _prf(). This adds up to ~3K flash. For resource constrained
devices running samples that don't use the extra formatting options,
allow them to select LOG_DISABLE_FANCY_OUTPUT_FORMATTING to revert
back to vprintk.
MCUBOOT is one such sample that has a very limited amount of output
and benefits from the flash savings due to small bootloader partition
sizes.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently each SoC has to define own list of power states.
However all these definitions have to be the same, as common power
management code uses them.
This commit replaces per-soc power state list by global definition.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Fixed an issue I2S wouldn't resume when started after a stop
Added code to empty the TX/RX FIFOs upon stop
TX stop is achieved by letting FIFO underrun, then changing state in ISR
RX FIFO is read until empty when RX is stopped
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
When calling genhtml to generate a coverage report directly from
sanitycheck (-C option), call it with the "--ignore-errors source"
option, so it does not exit when it meets a missing file, but
instead it warns the user and continues.
Fixes#13014
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
After #12732, 6904501173
asserts call k_panic.
Before this, the POSIX arch had its own hack in the
__ASSERT_POST implementation to terminate the process instead
of spining forever.
But the POSIX arch does implement k_panic properly, so there
is no need anymore for this hack.
=> Remove the special treatment for POSIX ARCH
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In 8dc69e09da (#10280)
the POSIX API main kconfig option was replaced from
PTHREAD_IPC to POSIX_API.
But the posix_cheats.h header was left using the old option.
This means that some applications/tests which were not
selecting the PTHREAD_IPC API, but using some other Zephyr
POSIX compatible APIs could have trouble when compiled for the
POSIX architecture.
Fixes#13011
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
