Add support for the littlefs file system in the fs shell. Update
the sample to use the same partition configuration as the littlefs
example for the SPI NOR test platform.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
littlefs is a fail-safe filesystem from ARM Mbed that has wear-leveling
capabilities.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Jim Paris <jim@bolt.io>
Zephyr verifies if it is built from a west-initialized directory.
The message changed in west@c08061cef1c7b0e19a58a82db731098e2f4bba4a.
Closes#18034.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Before calling socket callback function, make sure the callback
function exists so that we do not get NULL pointer reference.
Fixes#18021
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is expressed that the BOARD depends on whether NONSECURE is enabled
or not. But it is the other way around. Depending on the selected
board, it may or may not be possible to enable/disable NONSECURE.
The dependency is going in the wrong direction, this reversed edge is
observed to be able to create a cycle in the dependency graph.
Fix the dependency by removing it.
It is left as future work to enforce that enabling/disabling NONSECURE
is done in a way that is compatible with selecting
BOARD_NRF9160_PCA10090 vs BOARD_NRF9160_PCA10090NS.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The lsm6dso driver was in pre-merging state when a614a026
was committed. So, let's make the modification manually.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit implements timestamps for receiving frames on the
NXP MCUX FlexCAN CAN driver.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit introduces a timestamp for received CAN frames.
The timestamp is optional and can be activated via Kconfig.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The true mmio-sram nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are SRAM.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The true mmio-sram nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are SRAM.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The "{d,i}ccm" nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are {d,i}ccm.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The true mmio-sram nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are SRAM.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix an issue with enhanced connection complete event raised by the
advertiser role. The advertiser reported that it has resolved the
the identity address of the peer, even when the peer is connecting
using it's identity address.
The host will not have the correct on-air address type i.e public.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug introduced by: 45da629b24
Mistakenly set the own address type to the destination address type.
Also this uses the RPA_OR_RANDOM in case local IRKs exists in the
controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is related to findings in #17997 and changes network related
header files to have include files outside of extern "C" { } block.
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This dts binding file remained out from 0ec0c84808 commit, because
it was still in the pre-merging status.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a new test for unlocking nested scheduler lock. Make sure that
k_sched_unlock() isn't unconditionally a preemption point.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
The scheduler lock is a nestable lock. Unlocking a nested,
still-having, lock shouldn't preempt the current thread.
k_sched_lock();
k_sched_lock();
k_sched_unlock(); /* <--- this shouldn't be a scheduling point */
k_sched_unlock(); /* <--- this is a scheduling point */
This commit changes the preempt_ok argument from 1 to 0. This let
should_preempt() check whether it should preempt at the point or not.
This fixes#17869.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
The NSIM_HS target should have had the fpu flag to the compiler be:
-mfpu=fpud_all. Otherwise we get a build error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the open coded section attribute by Z_STRUCT_SECTION_ITERABLE()
to properly align structure instances on 64-bit targets.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The net_context_send API documentation was missing the fact,
that the callback might be called after the net_context_send()
has returned. Also currently the timeout value is not used properly
anywhere in the code. This is left like this as there is not much
use for the timeout value atm. This might be fixed later if there
is proper use case for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zephyr codebase standardizes in UTF-8 as file encoding. To
accommodate this, we explicitly pass encoding="utf-8" to Python's
open() function, to be independent of any locale setting of a
particular system (e.g., CI/build systems oftentimes have "C",
i.e. ASCII-only, locale). In a few places, we lacked this parameter,
so add it consistently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The 'registered' flag was not cleared when 'gatt metrics off'
was called so that one was unable to register the service again.
Remove 'registered' variable that is actually not needed as there
is no tracking if service is already registered in similar
cmd_register_test_svc command. If the service is already registered,
the host will log an error.
Fixes: #17882
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add SPI support for stm32mp157c_dk2 board. If SPI is selected, SPI4
(Arduino connector compatible SPI) and SPI5 (on front 2x20 GPIO
expander) will be enable by default on stm32mp157c_dk2 board.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Abstract some SPI LL function call for future driver compatibility with
a new SPI peripheral version (introduced with STM32MP1x and STM32H7x
SoC)
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This commit solves an issue where the NSS must be set before the
mode on the stm32mp157c_dk2, else LL_SPI_SetMode won't affect the
mode registry.
stm32mp1x (and stm32h7) LL function SPI_Init seems to also define
first the NSS then the mode, unlike other STM32 boards where this
is not specified.
Changing the order shouldn't have bad repercussions on other boards,
ZephyrnSPI driver test has been passed successfully on disco_l475_iot1
board.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
(This could not be triggered in the nrf52_bsim yet,
so just so it is fixed for the future)
Properly handle converting back and forth from absolute to HW
time when either of those is set to TIME_NEVER
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The old link seems not to work anymore, so instead replace it with an
invitation link freshly generated.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
An issue was seen after changes introduced in #17933.
The net_context callback was run after we checked that it
was run ok. This test failed of course in that case. Simple
solution is to k_yield() which will make sure that the
callback gets called before we continue. This works for this
test as our threads have suitably selected priorities.
There is also no need to use K_NO_WAIT here so replacing the
timeout with K_FOREVER.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pytest.raises context manager is now returning an ExceptionInfo
whose str() doesn't contain the str() of the underlying exception
object. Take str(e.value) directly to make sure we're looking at the
exception string.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The main change is the elimination of the bootstrapper, a design flaw
/ misfeature.
Update the documentation to be compatible with the 0.6.x releases as
well. This has to be done atomically, as there were incompatible
changes. Make use of the versionchanged and versionadded directives
to begin keeping track of how these APIs are evolving.
(Note that west 0.6.0 will remain compatible with the extension
commands in Zephyr v1.14 LTS as long as that is still alive. This
change is targeted towards Zephyr 2.0 users.)
This requires a bump in the shippable container and allows us to
simplify the west_commands test procedure.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Now that the runners package no longer depends on west, we can move
the documentation for it from the orphan west-apis.rst page to the
build-flash-debug.rst page that documents the west extension commands
which use that package.
(This is a more logical place for this information, but it was
previously not possible to put it there since we must be able to build
the documentation on a system without west installed, excepting
content in west-apis.rst. Removing the dependency means the runners
automodule directive can safely appear in build-flash-debug.rst.)
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
SPI NOR devices require that writes be performed within only one page at
a time. There is no such limitation on reads. Remove the code that
forced reads to be performed in 256-byte chunks.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The code failed to increment the address after completing a partial
write, causing writes that cross a page boundary overwrite at a page
level.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The message talks about seconds but displays ticks. Adjusting the
parameter to convert ticks to seconds then. But also adding the ticks
since it is a valuable information when testing counter devices.
Fixing small style issue (parameter indentation) as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
System clock for m4 core was set to same clock as m7 core.
This is wrong as m4 its value is actually based on clock frequency
value after D1CPRE (sys_d1cpre_ck) divided per HPRE value, 200MHz in
current case.
This also matches the max clock speed for the m4 core (200MHz)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
cores
In order to prevent potential misconfiguration set the clock setting,
which impacts both cores, under board.defconfig file which is used
by both core.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Makes the code that defines stacks, and code referencing
areas within the stack object, much clearer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
