select modem backend statistics and enable shell in cellular
modem sample. This will help advertise the feature, and can
help quickly identify issues with to small buffers.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Because of changes in other network header files, the net_if.h
was not included so add it directly to the echo-client and
mqtt_azure sources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The CONFIG_MAX_THREAD_BYTES=3 needs to be set otherwise this error
is printed by CI.
Too many thread objects (17)
Increase CONFIG_MAX_THREAD_BYTES to 3
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the LLMNR responder is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Since the CSIP API expects a set member struct for nearly all
functionality, the reference to the full set member (along with
the CAS specific CSIS) should be given to the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Improve navigability in the documentation by adding a link to the main
HTTP Server documentation page to the HTTP Server sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
It simplifies the macros to create the string descriptors. We also no
longer need placeholders for the SerialNumber descriptor when it is
generated from hwid. In the future, we can store other descriptor types
in the same list.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Shows a simple application which loads extensions and some simple
extensions. While everything is inside Zephyr tree, everything can
actually be build from different directories (even machines), as long as
the EDK is generated from the application and used by the extensions.
More information is available at sample's README.
This sample is build only for twister, as it requires a few steps to be
properly run, namely build the EDK, install it somewhere, build the
extensions using the EDK and finally build the application with the
extensions.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
This board includes three gpio-connected LEDs and push-buttons. Include
all missing defines in board's DTS and while at it, fix existing button
definition (missing pull-up enable) and align node names with other
boards (e.g. 'nucleo_wb55rg').
Provided changes were tested on real board with 'blinky' and 'button'
samples.
Additionally, duplicated LED nodes no longer required were removed from
overlay file for this board, in 'suspend_to_ram' sample.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
There is some instability problems with qemu_riscv32
https://github.com/zephyrproject-rtos/zephyr/issues/72858
which cause this sample test to fail in CI at random.
Let's change the integration platform to a reliable one,
so this test focuses on the sample and does not produce
false test failures due to the platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
nRF54H20DK board is first major user of new UDC DWC2 driver.
Add nRF54H20DK (Application CPU) to allowed platforms in USB device
samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Although we can get the number of configured OUT and IN endpoints and
endpoint capabilities from the DWC GHWCFGn registers, we need to
configure the number of endpoint configuration structs at build time. On
some platforms, we cannot access the hardware register at pre-init, so
we use the GHWCFGn values from the devicetree to provide endpoint
capabilities. This can be considered a workaround, and we may change the
upper layer internals to avoid it in the future.
Also, add a new vendor quirk to fill in platform-specific controller
capabilities.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When Broadcast Sink is connected to Broadcast Assistant then keep
connection when Broadcast Source is removed.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
This sample assumes that two separate sockets can be bound on IPv4 and
IPv6. On Linux (via Native Simulator Offloaded Sockets) this is possible
when there is no IPv4 to IPv6 mapping. Same can be true to other offloaded
sockets.
CONFIG_NET_IPV4_MAPPING_TO_IPV6 is disabled for this sample, so IPv4 to
IPv6 mapping is disabled for Zephyr native IPv6 layer. For offloaded
sockets this option does not define whether mapping is enabled or not, so
try to unconditionally (and without error checking) disable it.
This patch fixes compatibility with NSOS, since two separate sockets can be
bound on the same address and port, one for IPv4 and second for IPv6.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Set the default initial bitrates globally via Kconfig. The initial bitrates
can still be overridden using the "bus-speed" and "bus-speed-data"
devicetree properties.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
If the controller can detect VBUS state changes, enable USB support only
when the device is connected and disable it when the device is
disconnected.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When Block-Wise transfer restarts, the post-write callback should
receive some indication that the block is actually a beginning of new,
instead of part of previous transfer.
Fixes#71351
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Both nrf54l15pdk/cpuflpr and nrf54l15pdk/cpuflpr_xip have
watchdog on the list of supported periperals.
As a result, Twister tries to build samples/drivers/watchdog
for these two targets.
Since overlays are missing, build is failing.
Add missing overlay files.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add HID keyboard sample for the new experimental USB device support.
This is a limited and not fully compliant HID keyboard implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
RW612 has one FLEXSPI controller, which is capable of supporting
multiple external devices on one board. However, care must be taken when
configuring the FLEXSPI to use multiple devices, as if the FLEXSPI is
configured incorrectly in XIP mode it will fail to read from the
external flash, and the chip will crash.
Make the following changes to the RW configuration for the MEMC sample,
in order to support executing from flash while accessing PSRAM:
- initialize the FLEXSPI MEMC driver first, before the flash or PSRAM
drivers are initialized
- force the FLEXSPI MEMC driver to reconfigure the FLEXSPI at boot, so
we can configure the DQS sampling mode for the PSRAM on port B
- only configure the PSRAM pins during FLEXSPI init, so XIP is not
disrupted
- configure the flash device at boot. This is required so that the MEMC
driver will not replace the LUTs programmed in the FLEXSPI by the
bootrom, as it would otherwise not be aware of their existence.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The rcar boards use block variant of LittleFS and Disk Access API,
but have been using proj.conf for Flash API based access.
The commit adds section building boards with pro_blk.conf
into sample.yaml, where rcar boards will now be allowed,
and removes redundant configuration lines from board specific
conf files.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The chain-length DTS property is now mandatory, so remove the
optional Kconfig for setting the length
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Adds chain length and colour mapping properties to LED strip devices
on boards where these parameters are now required
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Add a new "hello world" sample that can be built for multiple board
targets. This sample can be used to see if Zephyr boots successfully
with _minimal_ configuration on SoCs with multiple cores, or boards with
multiple SoCs.
The following configurations are provided for now:
- nRF5340 DK: cpuapp+cpunet
- nRF54H20 DK: cpuapp+cpurad, cpuapp+cpuppr, cpuapp+cpuppr(xip)
Note that because of a quoting bug somewhere in the build system,
SB_CONFIG_REMOTE_BOARD is specified in .conf files (see the sysbuild/
directory). This should be fixed in the near future.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This creates a new category of samples that demonstrate certain features
of sysbuild. "application development" was a very generic name.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Make two of the CANopenNode sample configurations depend on "nvs" instead
of trying to establish a local rule for which boards have the needed
functionality.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This PR adds a sample demonstrating the use of the
State Machine Framework (SMF)
Instructions are in the README.rst for the sample.
Miro Samek was contacted and gave approval to use the state
diagram in this demo.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Add documentation page for HTTP server functionality.
Rename existing HTTP documentation to HTTP client, as it only covers the
client library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Modified readme for grow_r502a sample w.r.t
latest changes on driver like attributes and
LED controlling via zephyr LED subsystem APIs.
Signed-off-by: Dinesh Kumar K <dinesh@linumiz.com>
Removed fps_enroll, fps_search and fps_delete from
driver code, since they did application usage inside
driver. add the following attributes to achieve the
above functionality from application.
1. SENSOR_ATTR_R502A_CAPTURE
2. SENSOR_ATTR_R502A_TEMPLATE_CREATE
3. SENSOR_ATTR_R502A_RECORD_ADD
4. SENSOR_ATTR_R502A_RECORD_LOAD
5. SENSOR_ATTR_R502A_COMPARE
Signed-off-by: Dinesh Kumar K <dinesh@linumiz.com>
MBEDTLS_PSA_CRYPTO_C and MBEDTLS_USE_PSA_CRYPTO are 2 different
things and the former should not automatically enable the
latter. The reson is that the user might want the MbedTLS
PSA crypto toolbox to be built, but at the same time he/she
does not want TLS/DTLS (and other intermediate modules such
as PK, MD and Cipher) to use PSA APIs.
For this reason this commit introduces a new Kconfig option
named CONFIG_MBEDTLS_USE_PSA_CRYPTO to enable the corresponding
build symbol. By default USE_PSA_CRYPTO is disabled. It is
only explicilty enabled in tests/samples that were previously
setting CRYPTO_C (since in those cases USE_PSA was set).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Added the Round Display for Xiao boards as a shield.
Added a xiao_adc node to Xiao board dtsi files.
Signed-off-by: Nicolas Goualard <nicolas.goualard@sfr.fr>
Currently wifi sample code contains a pair of .conf and .overlay
for every single esp32-based board. Files are usually identical.
This PR remove all esp32* board files and use common socs instead.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Since the RW612 BGA board's FlexSPI configuration prevents the board
from executing from flash while the PSRAM is configured (unless both are
configured by a bootloader prior to XIP), run the MEMC sample from
internal code SRAM, and write data to the external PSRAM block via the
FlexSPI.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Do not print progress report so that makes debugging things
a lot harder. It is still possible to enable printouts if needed
by setting PRINT_PROGRESS symbol.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the IPv6 address that our socket is bound to deprecates, then
re-create the socket so that we avoid using deprecated IPv6 address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The bcdUSB value 0x0210 defined in USB 3.2 Specification indicates USB
3.2 device operating in one of the USB 2.0 modes. USB 2.0 Link Power
Management Addendum defines bcdUSB value 0x0201 to indicate that USB 2.0
device supports the request to read the BOS Descriptor.
The main difference between bcdUSB 0x0210 and 0x0201 is that the USB 3.2
device must support LPM, while USB 2.0 devices can (but are not required
to) support LPM.
The difference is respected by USB 3 Gen X Command Verifier (2.3.0.0)
Chapter 9 Tests [USB 2 devices], where the test behaves as follows:
* For bcdUSB 0x0200:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.00.
DUT is NOT compatible with LPM.
LPM is NOT required for DUT
LPM is only supported in USB version 2.01 and above.
* For bcdUSB 0x0201:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.01.
DUT IS compatible with LPM.
LPM is NOT required for DUT
USB 2.0 Extension Descriptor bmAttributes:
LPM Capable = 0
BESL and Alternate HIRD Supported = 0
Baseline BESL Valid = 0
Deep BESL Valid = 0
Baseline BESL: 0d
Deep BESL: 0d
LPM is not supported
* For bcdUSB 0x0210:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.10.
DUT IS compatible with LPM.
LPM IS required for DUT
USB 2.0 Extension Descriptor bmAttributes:
LPM Capable = 0
BESL and Alternate HIRD Supported = 0
Baseline BESL Valid = 0
Deep BESL Valid = 0
Baseline BESL: 0d
Deep BESL: 0d
(USB: 9.6.2.1.6) Bit 1 in Attributes field of a USB 2.0 Extension
descriptor returned in response to a GetDescriptor(BOS) request
must be 1 for LS/FS/HS devices that support LPM L1.
The test fails when LPM bit is not set in USB 2.0 Extension Descriptor
only when bcdUSB is 0x0210. The test failure was incorrectly fixed in
commit 312429be3c ("usb: samples: Add Extension descriptor to webUSB
sample."). Properly fix the issue by changing bcdUSB to 0x0201 and
removing the false LPM support claim.
The false LPM claim was leading to device ceasing to work after some
time if there was no traffic from host to device (when the host is
likely to have executed the LPM L1 transition that was not properly
handled by the device).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Convert the ht16k33 to use the input subsystem. This can still be used
with the kscan API with the zephyr,kscan-input driver, or use the
input-keymap one to generate input codes instead.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
VTILED displays with a height other than x8 fail to draw bottom-row
tiles. This is because it extends beyond the display area.
I fixed the drawing area to be cropped to fit within the display.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Fix the failures introduced in #72078 by manually enabling all the
hash algorithms as they used to be.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Move supported configuration items from the custom MbedTLS user
configuration file over to the Kconfig overlay.
The correct macros are then defined by the MbedTLS module according
to the values of the Kconfig options.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The overlay for the mimxrt1062 boards gnss alias is pointing
to the uart node rather than the gnss node. Adjust gnss alias
and node naming.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
hawkbit is rebooting automatically after installing a new update,
reflect that change in the docs.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
1) Replace master/slave in API for new terms in eSPI spec 1.5
2) Reflect eSPI VW change and macro changes across eSPI drivers
3) Update terms in eSPI driver sample and eSPI test driver
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
A scheduler fix for free memory usage on aborted threads is now using
a per-CPU dummy thread instead of a single stack-based one at startup.
These static thread objects need spots in the kobj bitmasks, and a few
tests are sitting right at the default limit (16 threads).
Signed-off-by: Andy Ross <andyross@google.com>
Move the kconfig options used to configure the interrupt
and wait time to the sample which uses them instead of
having them in the architecture code.
This options are very particular for this sample and not
really an API.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the readme as the sample works on native_sim,
and native_posix will be deprecated soon.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Move the LLVM fuzzing specific code out of the board main
file and into the sample.
That way we avoid needing to duplicate it for native_sim and
avoid having a very adhoc interface between the fuzzer test
and runner code.
Also ensure it works for native_sim and not just native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With the update of MbedTLS to 3.6.0 the configuration files
(mbedtls/mbedtls_config.h, psa/crypto_config.h)
are not found anymore by default.
Make the ARoT's CMake target inherit from psa_crypto_config;
it defines what is needed to find the MbedTLS
configuration files.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add simple sample for the i2c target driver interface using the
i2c-target-eeprom as a target device.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed Harness's repeat field.
Added to schemas in e722db14ad,
together with the rest of harness_config.
Added to Harness when it was created.
Now present only in one sample -
mec15xxevb_assy6853 power management sample.
Could not find definitive proof whether it has ever been used.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Disable the quadspi mpu region of the nucleo_f756zg (like done on
nucleo_f746zg) when testing the samples/userspace/shared_mem
or tests/kernel/mem_protect/userspace
The stm32f7 cortex M7 has 8 MPU regions and the one for quadspi prevents
the testcase to PASS.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A simple HTTP server sample application.
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds support for these NXP Multi-core boards for
IPC static_vrings sample using OpenAmp lib:
- lpcxpresso55s69
- mimxrt1160_evk
- mimxrt1170_evk
- mimxrt1170_evkb
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
In most cases these were defined as 1. Saving one byte for the rest
doesn't really justify the added complexity that comes with these
options. Removing them also simplifies the interface between HCI
transports/drivers and the host stack, which in turn helps pave the way
for having HCI as a proper Zephyr driver API.
Fixes#71907
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Currently the USB configuration of this sample is
selecting POSIX_CLOCK and being built by default with
USB_NATIVE_POSIX. This combination is currently not possible
due to mutually exclusive dependencies (the host C library)
which results in a configuration warning and POSIX_CLOCK being
forced to 'n'.
Let's instead disable POSIX_CLOCK in this sample USB config
overlay, until the USB native driver supports building
with embedded C libraries.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With the changes made in pull request #68741, RPMsg service is
supported on stm32h747i_disco using the STM32 HSEM IPM driver. For the
sample to work, add device tree overlays to enable the mailbox and set
the shared memory appropriately.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
Example of usage of HCI vendor specific Set Scan Request Reports
command, Scan Request Received Event and corresponding callback
to get application events. The sample application shows usage as an
alternative to extended advertisent saving precious RAM.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
With the deprecation of `BT_LE_ADV_OPT_USE_NAME` and
`BT_LE_ADV_OPT_FORCE_NAME_IN_AD` samples were updated to not use the
macro adding the device name in the advertising/scan response data
anymore.
Instead the name was explicitly added to the scan response data in
`periodic_adv` sample. But because it was using an extended advertiser
and was already adding data in the AD, the name should have been put in
the advertising data and not the scan response data.
Update the sample to add the device name in the advertising data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add overlay, for nrf52840dk, that reserves RAM in internal
SRAM using the DTS definition.
The sample with such region can be built with the config
file nrf52840dk_nrf52840_ram_disk_region.conf, but, instead
of automatically allocating memory, the Disk driver will
use the pre-defined region provided by the DTS overlay.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add configuration for nrf52840dk that allows to create RAM
disk; this configuration does not reserve special region
in RAM using DTS but uses automatic buffer allocation, by RAM
Disk Drivers, according to RAM disk specification in DTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Improve the default serial backend init level.
The documentation says to be bigger than the init level of the serial
device used. Since serial devices default to the kernel device init
level (50) then put this to default of application level drivers (90).
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Report more information and do not use `dev->name` so that what the
sample prints looks less similar to the GNSS dump logs.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The adc sample was in the root directory of the adc samples.
Move all the files to a subdirectory adc_dt.
Signed-off-by: Paulo Santos <pauloroberto.santos@edge.ufal.br>
Add support for using sysbuild for central_hr and
peripheral_hr samples so that hci_ipc sample is built
for nRF53x SoCs boards.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update central_hr sample to support using extended
advertising and hence be long range compatible on SoCs
that support Bluetooth Low Energy Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add LED blinking state to peripheral_hr indicating
advertising state, and LED On state to indicate connected
to a central device, respectively.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update peripheral_hr sample to support using extended
advertising and hence be long range compatible on SoCs
that support Bluetooth Low Energy Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the samples that were using those options by explicitly adding
the device name in the advertising data or the scan response data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
For the last dozen commits, the role of usbd_class_node has actually
been taken over by usbd_class_iter. After cleaning up and merging
usbd_class_node and usbd_class_data, we can rename usbd_class_iter to
usbd_class_node to better reflect its role.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since only usbd_class_node contains the class instance data, rename it
to usbd_class_data.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB High-Speed devices must be able to operate at both High-Speed and
Full-Speed. The USB specification allows the device to have different
configurations depending on connection speed. Modify the API to reflect
USB Specification requirements on what can (e.g. configurations) and
what cannot (e.g. VID, PID) be speed dependent.
While the class configurations for different speeds are completely
independent, the actual class instances are shared between operating
speeds (because only one speed can be active at a time). Classes are
free to provide different number of interfaces and/or endpoints for
different speeds. The endpoints are assigned for all operating speeds
during initialization.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Introduce usbd_class_iter for keeping endpoint assignment variables
and the single-linked list node. No functional changes right now, but
this paves the way for independent speed specific configurations.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Updates the linker script fragments under 'samples' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Board specific sample that only works with certain revisions of the
hardware requiring special BIOS settings.
Fixes#58057
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
FTM internal counter can be clocked by one of three clock sources
independent of the module bus clock. This patch introduces a DT property
to perform the clock selection from DT.
DT sources are updated to keep the current clock selection for all boards,
with exception of ucans32k1sic board which is migrated to use system
clock by default, as this seems to be a better choice for most cases.
Some PWM LED samples require slower clock so overlays are added for
those cases.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add the overlay for the esp-wrover-kit, to drive a character display
based on HD44780 chipset using the I2C bus gpio controller PCF8574.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add default configuration related to BLE protocol,
for Application and Radio core on nRF54h20 platform.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Adds missing overlay and conf for native_sim/native/64 and
native_posix/native/64 platforms.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The last parameter to getsockopt() should be a socklen_t *
not an int *.
Let's fix it to avoid a build warning which breaks this tests
in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Convert all of the NXP SOCs with ENET to use the new
binding scheme, which is used by the new driver.
Convert any boards using this SOC to the new scheme as well,
and remove from the documentation the bit about the experimental
nature of the new driver and the overlay that shall no longer exist.
Some of the boards I do not have the hardware of, so apologies
if something breaks, as I have no way to know. All the boards
were made sure to at least build.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Deprecate ETH_MCUX, by:
- Marking it as DEPRECATED in Kconfig, obviously.
- Unmarking the new driver as experimental.
- Putting the new and old drivers in the same folder.
- Reworking the menu appearance of the driver selection.
Note that technically now it is possible to choose the wrong
driver than what is enabled in DT, this is intentional, but
the correct one will obviously be enabled by default.
- Convert all sample overlays to the new Kconfigs. This was
part of the motivation for the shared overlays, as it was
causing twister/CI logs to look ugly and misleading due
to Kconfig warnings.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Enabled nxp lpadc driver acquisition time feature, the overlay file
can express acquisition time in microseconds, nanosecond and ADC
ticks.
The purpose of updating these overlay files is not only for local
testing, but also to remind users that they can use this feature.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
"zephyr,sdmmc-disk" compatible stands for binding with sdmmc subsys which
is not compatible and not used with current STM32 sdmmc driver.
Declaring this compatible is a no op on STM32, so remove it.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Because CONFIG_POSIX_API (required) cannot be selected on that platform,
resulting in build failures.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The periodic advertiser samples use a periodic advertising interval
in the range of 1 to 1.2 seconds.
Previously the sync timeout of 1.7 seconds would cause the sync to be
lost after failing to receive a single periodic advertising packet.
This change therefore aims to improve the user experience.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The native_posix compilations fail with various socket
errors like this:
samples/net/sockets/can/src/main.c:65:9: error: implicit \
declaration of function ‘send’ [-Werror=implicit-function-declaration]
65 | ret = send(fd, &sframe, sizeof(sframe), 0);
| ^~~~
So disable the native_posix board from networking samples as
native_posix board is not compatible with CONFIG_POSIX_API
This is related to commit b8fc1c4c3e ("samples: net: Disable
native_posix target in samples") but disables more network samples
for native_posix board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
- TCP should not be disbled by default for subg in this particular
sample since it is mostly used to test network rather than
performance.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
- TCP should not be disbled by default for subg in this particular
sample since it is mostly used to test network rather than
performance.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Update comment about use of NRF_DEFAULT_IRQ_PRIORITY in
hci_ipc sample for Nordic nRF53x series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add handling of SCK initial value based on the SPI mode used.
If mode is using CPOL then SCK needs to be set.
Fixes: #71154
Signed-off-by: Joakim Andersson <joakim.andersson@heimdallpower.com>
Fix setting of sample frequency.
The nrfx drivers are now using raw integere values instead of nrf
definitions.
Fixes: #71154
Signed-off-by: Joakim Andersson <joakim.andersson@heimdallpower.com>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
on stm32f091 and stm32g071 nucleo boards
This avoids HARD Fault when reaching the last reboot
Disable the external flash memory of the b_u585i_iot02 target
to end the test properly
Signed-off-by: Francois Ramu <francois.ramu@st.com>
It seems that harness_config defined in the 'common' section
is discarded when test adds fixture to it's harness_config.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add nRF54L15 to platform_allow and integration_platforms
in the sample.yaml.
Overlay file for that target already exists in the boards
directory.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
After erasing the sector, compare dat read with expected 0xFF pattern
to decide if erasing is successful instead of relying on the
returned code of the flash_erase function
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fixes some missed renames for overlays with the recent change
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adjustments of dts and defconfig files to adjust for the MERGE removal.
The revert of MERGE requires specific dts and defconfig files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
LPTIM4 is selected, since it is used only for internal timing
and it doesn't support output/input
Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
An overlay file was wrongly added to a target_sources call, this has
now been corrected.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
For demonstration purposes add a way to capture some arbitrary
data and send it in cooked mode for analysis.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If there are multiple tunnels, then use the tunnel device name
to select the correct one. Note that this tunnel is only used
for network packet capture in this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The CONFIG_MAX_THREAD_BYTES=3 needs to be set for multiple
boards like mr_canhubk3 and xiao_ble when running in usermode.
Too many thread objects (18)
Increase CONFIG_MAX_THREAD_BYTES to 3
Fixes#70955
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The native_posix compilations fail with various socket
errors like this:
samples/net/sockets/echo_server/src/udp.c:45:26: error: implicit \
declaration of function ‘socket’ [-Werror=implicit-function-declaration]
45 | data->udp.sock = socket(bind_addr->sa_family, SOCK_DGRAM,
| IPPROTO_UDP);
Disable the native_posix board from networking samples so that CI can pass.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "frdm_k64f" is referred as frdm_k64f and ``frdm_k64f`` in
places, update them to ":ref:`Freedom-K64F <frdm_k64f>`" or
``frdm_k64f``.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Change 'Hawkbit' and 'hawkbit' to 'hawkBit' wherever
makes sense, and a bit of touch ups here and there.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add harness as twister by default looks into ztest results and
in bluetooth configuration they won't be find.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add support for supplying a broadcast code to the
broadcast audio sample, which will, if non-empty, encrypt
the broadcast.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a harness to avoid twister waiting for results on the UART, which
won't happen unless there is a connection established to a remote
Bluetooth device.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
There are required DTS entries to nable peripherals required
for IPC communication between Radio and APP CPUs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Adds the device trees, Kconfig, and documentation files.
The following features have been confirmed working on hardware:
* LED
* Button
* ST7735 TFT-LCD
* External QuadSPI NOR Flash memory
* External SPI NOR Flash memory
* USB CDC ACM
* microSD card
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
The thermometer sensor sample application can support any board that
defines the `ambient-temp0` devicetree alias, but the restrictive
`platform_allow` list prevented twister from running on all but two
selected boards. Use a more flexible `dt_alias_exists` filter instead to
allow running this sample on additional boards.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
The VLAN sample application only had configuration support for
the Ethernet interface and one VLAN interface, and left the one
VLAN interface unconfigured. Fix this by adding config support for
all three network interfaces created by the sample.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
A virtual metal_device is created and then the needed IO regions created
and added to this device. Immediately we extract these regions back out
and make use of them. There is no reason to do this, instead simply
use the created IO regions.
This also removes the need to have struct metal_device defined to have
more than one IO region (METAL_MAX_DEVICE_REGIONS), which is not default.
If the libmetal library was built with a different value, then updating
this header would not fix the underlying implementation leading to runtime
failures.
Signed-off-by: Andrew Davis <afd@ti.com>
We are always the remote client in this example. The shared pool is only
used for allocating ring descriptors when we are the host. Do not create
a shared pool with a NULL base address, simply do no pass in a pool.
Signed-off-by: Andrew Davis <afd@ti.com>
Currently a mix of printk() and LOG_*() are used, switch to using
the LOG functions in all cases. The code also has mixed line-ending
types, as the LOG functions add newlines remove these.
Also some messages that are failures are printed with debug log level,
use ERR level here.
Signed-off-by: Andrew Davis <afd@ti.com>
Check if creating the RPMSG endpoint fails and exit the task if so.
This prevents a later null pointer dereference if we try to continue.
Signed-off-by: Andrew Davis <afd@ti.com>
Be respectful of PAwR subevents while scheduling scan activities.
The radio will be swtiched from scan to PAwR when it is closed to
the next subevent interval.
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
Create regulator on GPIO for microphone supply
Set pdm data and clk pins in pinctrl
Add xiao_ble_sense overlay for dmic sample support
Signed-off-by: Zak Portnoy <zakportnoy@gmail.com>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN interfaces are now Virtual type so we need to
collect only the Virtual interfaces and not Ethernet ones.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The thrift hello/client sample did not have the required
kconfig options for some reason.
Adding these seemed to fix the issue.
CONFIG_COMMON_LIBC_THRD=y
CONFIG_DYNAMIC_THREAD=y
CONFIG_THREAD_STACK_INFO=y
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
The native_sim USB driver gives this error currently if one
enables CONFIG_POSIX_API.
drivers/usb/device/usb_dc_native_posix_adapt.c:22:10: \
fatal error: sys/un.h: No such file or directory
22 | #include <sys/un.h>
| ^~~~~~~~~~
compilation terminated.
Disable the netusb support from networking shells for native_sim
board for now so that CI can pass.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Changing remaining users of fcntl.h to use the include from our own
POSIX file so that the values in there are consistent in all parts
of the sources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If enabling CONFIG_POSIX_API, we get three file descriptors open
before any socket descriptors. The sample exit criteria checks
socket 0 and 1 which is no longer a valid one, so change the
check to be either 0 or 3, and 1 or 4 so that the test can be
run in both when POSIX API is enabled or disabled.
Also disable color printing for the test run so that it is
easier to read the output log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This fixes this error printed by CI:
Too many thread objects (21)
Increase CONFIG_MAX_THREAD_BYTES to 3
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Change the sample applications that use network socket API to
use the POSIX_API config because the NET_SOCKETS_POSIX_NAMES is
deprecated. Convert also the zsock_ API calls to plain BSD
socket API calls when applicable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The sample wants to print the memory controller base address. However,
MEMC_BASE is used as argument in printf which is defined as long long
int. Use the memc pointer instead to print the base address.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The output example has not the correct indentation for the code-block
directive and therefore adds this output as normal text.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
During a memory mismatch, the sample only prints an error message.
Also print the read and write buffer to see the actual difference.
Moreover, add a print for each compare step to see the sample is still
running.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Adds missing sample.yaml file.
Update some sample.yaml to include build_only
Update some sample.yaml for device testing.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
MODEM_UBX: Adds Support for UBX Messages in Modem Subsystem.
GNSS API Supported: get_supported_systems, set_fix_rate, get_fix_rate,
set_enabled_systems, get_enabled_systems, set_navigation_mode,
get_navigation_mode.
Boards Tested: MIMXRT1062_FMURT6, VMU_RT1170.
Note: Partial support for U-BLOX Messages is provided as of now.
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
The nrf5340bsim_nrf5340_cpuapp hwmv1 board name
was replaced with nrf5340bsim/nrf5340/cpuapp in hwmv2.
Let's fix it
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
USB initialization function mandates pointer to
callback. Seems this pointer was missed in hci_usb sample.
Commit fixes this.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
arch_interface.h is for architecture and should not be
under sys/. So move it under include/zephyr/arch/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
'native_sim' builds without any issues as part of twister and it also works
when manually setting up Ethernet virtual device (using
tools/net-tools/net-setup.sh).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
'http_get' is one of the few samples that just require connection to
internet (google.com over HTTP or HTTPS) and check if HTTP GET was
successful. Use it for minimal coverage of Native Simulator offloaded
sockets:
* DNS resolving
* basic TCP transfer
* compatibility with Zephyr TLS subsystem (which required some fcntl()
operations)
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Simplify this sample's recently updated configuration, and ensure that
the file suffix feature works in sysbuild.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
regression.sh path is now tfm/api_ns/regression.sh, reflect it in the
doc.
Remove duplicate TF-M material.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Rather than providing flash partitions in samples, provide default
partition (no tests) as part of the board ns variant default configuration.
Update or remove related overlays.
Update ns variant yaml file to specify actual flash available for the
ns application (36K).
Additionaly, fix comment in b_u585i_iot02a_ns.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
