- place all sensor Kconfig options in submenu
- separate device drivers and common options with a comment line
- align help text
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This patch implements BMM150 driver with polling mode and its tested
with original BMM150 sensor hardware. Driver works on I2C
interface as of now.
Following datasheet is taken as reference while developing driver.
http://www.mouser.com/ds/2/783/BST-BMM150-DS001-01-786480.pdf
Signed-off-by: Punit Vara <punit.vara@intel.com>
This patch implements following functionality in polling mode.
Ambient light
RGB light
proximity sensor
Following datasheet has been used to develop driver
https://docs.broadcom.com/docs/AV02-4191EN
Jira: ZEP-1552
Signed-off-by: Punit Vara <punit.vara@intel.com>
Support for LSM6DSL accelerometer and gyroscpe sensor
with bare minimum features.
For more info on this sensor:
http://www.st.com/en/mems-and-sensors/lsm6dsl.html
Change-Id: I9b100a3e030faa8a70a5015a881025c876b81be4
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Support for LPS22HB Pressure and temperature sensor provided
with bare minimum features.
For more info on this sensor:
http://www.st.com/en/mems-and-sensors/lps22hb.html
Change-Id: I14992b954053094beb054d0dba7581f6e29a3e68
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
* lis2dh 3 axis accelerometer support on SPI and I2C bus
* data ready and anymotion type of trigger support
Tested on Dynastream module D52QD2M4IA-A using SPI
Origin: based on Zephyr lis3dh driver
Change-Id: I2c4e9418b87f09c957bba8f73522bd78830bc809
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
Adds basic sensor driver support for the Maxim MAX30101 heart rate
sensor.
This driver does not yet support any sensor triggers such as the data
ready trigger, or runtime changing of sensor attributes.
Default configuration values were taken from the MikroE Hexiwear driver.
https://github.com/MikroElektronika/HEXIWEAR
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX30101.pdf
Jira: ZEP-720
Change-Id: Ie8981e124da36a56a214f133bf9a11b9f47d60fa
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds sensor driver support for the NXP FXAS21002 3-axis gyroscope.
Includes statically configurable range and output data rate, as well as
the sensor data ready trigger.
Datasheet:
http://www.nxp.com/assets/documents/data/en/data-sheets/FXAS21002.pdf
Jira: ZEP-1392
Change-Id: I84587c4d5e76863245e9d045c6abb10b21b2615a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Basic interrupt driven driver for the nRF5 onboard temperature sensor.
Change-Id: Id0ac303293b8e8b8285b19bcda31284ee6617105
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Adds basic sensor driver support for the NXP FXOS8700 6-axis
accelerometer/magnetometer. Currently this driver supports
accelerometer-only, magnetometer-only, and hybrid (accelerometer +
magnetometer) modes, as well as 2g, 4g, and 8g accelerometer full scale
ranges.
This driver does not yet support any sensor triggers such as the data
ready trigger, or runtime changing of sensor attributes.
Datasheet:
http://cache.nxp.com/files/sensors/doc/data_sheet/FXOS8700CQ.pdf
Origin: Original
Jira: ZEP-721
Change-Id: Iff0f751c737196f60d5c5d3448631b57093ece34
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Sensors are end-devices and usually nothing depends on them,
so set a global priority for all sensors and use it instead of
individual values per sensor.
Change-Id: I5847411e783ef8a8517f0ab1d8234810513707b4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add device driver for the TMP112 I2C temperature sensor
Datasheet:
http://www.ti.com/lit/ds/slos887d/slos887d.pdf
Change-Id: I08208204cd8f377dc65378aaf2b92c7cdefe8d2b
Origin: Original
Signed-off-by: Mariusz Ryndzionek <mariusz.ryndzionek@firmwave.com>
Add driver for LSM6DS0 accelerometer, gyroscope and temperature sensor.
Change-Id: Ic04fa8d0bbf935e7f04ed7981554d8095ceb5ccf
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Remove the CONFIG_SENSOR_DEBUG as it is no longer needed since switching
to SYS_LOG_* in the sensor susbsystem.
Also, use __ASSERT where CONFIG_SENSOR_DEBUG was used to validate
function parameters.
Change-Id: I80ed7209abfb92220fa229d246c5b3a43b887e32
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
* Rename BMP280 to BME280 which is a superset for the former.
* Autodetect device based on chip ID.
* Implement humidity fetching and reading for BME280
* Rename sample BMP280 to BME280
Change-Id: I565c769a7011e7496c9f1cad861d5ee311839b4f
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Remove the homegrown sensor delayed work API in favor of using the
system-wide workqueue. Drivers still have the option of using their own
fiber.
In a second step, drivers can be refactored to start and use their own
workqueue.
Change-Id: I70dea6fc2abcbc9e04ac1ed3c837483a3d3c4424
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Add device driver for the multi function device (MFD) part of LSM9DS0:
accelerometer, magnetometer and temperature.
Datasheet:
https://www.adafruit.com/datasheets/LSM9DS0.pdf
Change-Id: I00b9db2c69c6e5229269afacb02bf5f921edabe9
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Add driver for the TMP007 intrared thermopile sensor which measures
the temperature of an object without direct contact.
Datasheet:
http://www.ti.com/lit/ds/symlink/tmp007.pdf
Origin: Original
Change-Id: I29857b2e424a2144370d75e2ee40c4ff8b619afd
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This is a temperature and atmospheric pressure chip. The datasheet is
available at:
https://www.adafruit.com/datasheets/BST-BMP280-DS001-11.pdf
Change-Id: I3406eb6c2c4da564757b8315323d0681d648b541
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Add device driver for the gyroscope part of LSM9DS0 gyroscope.
Datasheet:
https://www.adafruit.com/datasheets/LSM9DS0.pdf
Change-Id: I25e0c8470c9b68c594bc4a0d2a9a13f8f41ee309
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Add driver for the HDC1008 temperature and relative humidity
sensor.
Datasheet:
http://www.ti.com/lit/ds/symlink/hdc1008.pdf
Origin: Original
Change-Id: I63cb4cdd94120b80d0d6f3205da073f0817c4f17
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add device driver for the BMA280 I2C-based triaxial accelerometer
sensor, which supports reading data from the accel-x, accel-y, accel-z
and temperature channels. The driver also has support for data-ready
and any-motion triggers.
Datasheet:
http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf
Origin: Original
Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Move driver specific config options to separate Kconfig sub-files
as this is a more scalable approach when considering that multiple
sensor drivers will be added in the future.
Change-Id: Ia1d62afd628723be33868d6c1a956ca7b27eba88
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Support for data-ready and near/far triggers is included. Datasheet the
sensor available at <http://www.semtech.com/images/datasheet/sx9500_ag.pdf>.
Origin: Original
Change-Id: Idd491a8bad7e119b0ed66e655955228ffdac6e76
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The MCP9808 supports threshold triggering. Add support for this feature
in the driver and the sample application.
If triggering is activated, the driver can create its own fiber or use
the system-wide sensor fiber.
Origin: Original
Change-Id: Ie825a22245cb48cbdffba3049011e4d305975d53
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The driver only supports simple temperature readings. It does not
support the alarm feature. Datasheet available at
<http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf>.
Origin: Original
Change-Id: I283e6697fc6947975323d280f5ff0ba625fac5a9
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
