BOSSA takes the offset within flash memory, not the absolute address.
This doesn't matter on most boards as the flash starts at zero but
does matter on the Due as the flash starts at +512 KiB.
Signed-off-by: Michael Hope <mlhx@google.com>
Updates the contribution guidelines to document the current board policy
of rejecting non-OSI-approved licenses.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
The log output instances all named "log_output" in backends
collide with the "log_output" parameter of various functions.
This renames the variables in the backends to make them
more descriptive. Same goes for the buffers for some of
these instances as they are all named "buf", and "hostname"
being used in the network backend, so they are renamed.
There are a few places where variables are overriden within
an inner scope (e.g. inside loop and if block) so they are
also renamed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
There is a global variable named "dev" to store which UART
device is being used the tracing backend. This name collides
with the parameter of same name in the ISR function. So rename
the global variable.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
In the function smp_init_top(), the variable "start_flags"
collide with global variable of the same name. So rename the one
inside the function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
In the function sys_heap_alloc(), the variable "chunksz"
collide with function named chunksz(). So rename those variable.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
In the function z_set_timeout_expiry(), the parameter "idle"
and an inner variable "next" collide with function named idle()
and next(). So rename those variables.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope. There are a few spinlock
keys simply named "key". So rename those in inner scope to avoid
shadowing the outer ones.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This PR fixes the links to the example files in the Gitlab repository.
Fixes Dir 4.8 and Rule 2.1, 5.1, 5.8, 5.9, 8.5, 8.6, 13.1, and 13.5.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
printf function didn't have enough specifiers for the
number of arguments in the command line (Coverity warning).
Fixes#26985Fixes#26986
Signed-off-by: David Leach <david.leach@nxp.com>
Added the 'fall through' comment to switch to quiet compiler
and coverity warnings.
Fixes#25724Fixes#25726
Signed-off-by: David Leach <david.leach@nxp.com>
Coverity is not able to detect that the call to ztest_test_fail()
will not return so it emits a warning on a later access to
param. Add a return; after the call so coverity won't complain.
Fixes#25790
Signed-off-by: David Leach <david.leach@nxp.com>
Coverity warnings on dead loop code. We know this can
occur if the NUM_CPUHOLD is defined as zero which occurs
when CONFIG_SMP is false.
Fixes#20516Fixes#20517
Signed-off-by: David Leach <david.leach@nxp.com>
Suppress the coverity warning on using the semaphore as
this semaphore is used and freed only in this function.
Fixes: #18960
Signed-off-by: David Leach <david.leach@nxp.com>
This is a cargo-culted attempt to make an error observed in poorly
understood CI circumstances go away when loading edt.pickle, by making
edtlib visible in sys.modules before loading the pickle file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add @abrodkin to the list of CODEOWNERS for ARC code (ARCH,
BOARDS, DTS) instead of @vonhust.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding the get_maintainer.py script
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add an entry in CODEOWNERS for auto-assigning reviewers
in MAINTAINERS.yml and get_maintainer.py files.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch enables the rtc so that the testcase
tests/drivers/counter/counter_basic_api
can run on this nucleo_f091rc board
also when running sanity check
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The Olimex STM32-h103 is a development board based on the STM32F103RB,
very similar to the stm32_mini, which was used as a reference for the
pinmux configuration.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
This sample is nothing more than just a special setup of UART for some
nfc, has nothing specific to nfc and might be misleading, so removing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Just as NULL pointers should not be dereferenced, they should
not be called either.
Fixes 26723
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Remove the device_type = "memory" property from the PSRAM node. We make
the slightly arbitrary distinction of using 'mmio-sram' compatible for
memories that don't need some kinda of dram style configuration or may
be on die.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rewrite 'exit_tickless_idle' macro to make code more readable.
No functional changes intended.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
NOP instruction is available via builtin for ARC so get rid of all
ASM inlines with NOP/NOP_S instructions.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Zephyr has generic find_msb_set and find_lsb_set implementations.
They are based on builtins so they are optimized enough.
Drop custom ASM implementation.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
_vector_table and __vector_relay_table symbols were exported with GTEXT
(i.e. as functions). That resulted in bit[0] being incorrectly set in
the addresses they represent (for functions this bit set to 1 specifies
execution in Thumb state).
This commit corrects this by switching to exporting these objects as
objects, i.e. with GDATA.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update stm32 ethernet driver to get basic boot configuration from
device tree.
So far information are:
- Label
- Base address
- IRQ number and prio
- Clock settings
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update boards that use to declare ethernet support to enable
matching ethernet node.
Similarly to other devices, use dts API to control ethernet pin
settings.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The Arduino Nano 33 IOT is a a small form factor development board
with USB, Wifi, Bluetooth, a 6 axis IMU, and secure element.
Signed-off-by: Michael Hope <mlhx@google.com>
Add PL330 dma driver support, this driver
- supports 32 bit memory to memory operation
- supports 36 bit memory to memory operation
under a config flag DMA_64BIT
- supports secure channel
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Add 64bit source_address/dest_address fields support.
This is needed in situation where DMA controller is capable
of handling more than 32bit source and destination addresses.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
The mempool implementation doesn't require specific sizes and can
support arbitrary sizes up to the limit of available memory. The
Kconfig documentation on this configuration was confusing user.
Fixes#20418
Signed-off-by: David Leach <david.leach@nxp.com>
Fix compilation warnings when CONFIG_NET_SOCKETS_OFFLOAD enabled
warning: passing argument 5 of '__eswifi_socket_new' makes pointer
from integer without a cast [-Wint-conversion]
395 | idx = __eswifi_socket_new(eswifi, family, type, proto, 0x50CE);
| ^~~~~~
| |
| int
eswifi.h:137:21: note: expected 'void *' but argument is of type 'int'
137 | int proto, void *context);
| ~~~~~~^~~~~~~
In function 'eswifi_socket_bind':
warning: comparison between pointer and integer
461 | if ((addrlen == NULL) || (addr == NULL) ||
|
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
