This allows to set custom ID address from shell app.
Change-Id: I293800f116a7e56e183720a9b908ccb0e9622c12
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need for struct bt_storage being modified by stack.
Change-Id: I732cf94983a29de40d692e802d6a71b8986708df
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Correct the indentation of numbered lists to
appear correctly once render.
Change-Id: Ie1b92a7c5d2517e4f36626858404458c3b461be9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch fixes long writes handling. Attribute length error and
invalid offset error for prepare write should be sent in a response
to execute write request.
Change-Id: I9b4cbe0df198df9d685dbd2b328009290ebdc567
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The flag BT_LE_AD_NO_BREDR shall be set which makes BT_DATA_FLAGS
mandatory.
Change-Id: Id933a4d73bc9fdcdc53c197041bb488d45ba149a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update RPC to the newest RPC introducing some security improvements in
the firmware.
Change-Id: If031bb13927d63e029fcc6da34051257d13632a5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When doing LE SC pairing with Passkey Confirmation slave must wait
for remote DHCheck before doing comparison. This fix issue with
pairing as slave when passkey was first confirmed locally.
Change-Id: Iba780836341a944997adde24285b2e650b31afa1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_recv should be used to send event back to stack.
Change-Id: I092e2480b3f0e5c40c0751c30be46d0310012bae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Display text strings on parallel interfacing HD44780 based
generic LCD controller using GPIO pins to interface with
Arduino Due(SAM3). HD44780 is a popular controller and an
example can help using gpio pins in parallel with it. I
have tested it on JHD20x4 LCD panel for 4Bits & 8Bits
configuration. The code has been made generic so that user
can modify quite a few options.
Datasheets:
http://lcd-linux.sourceforge.net/pdfdocs/hd44780.pdf
Signed-off-by: Milind Deore <tomdeore@gmail.com>
Change-Id: If2809222466b462fa2f4c42b14a514828530f082
This sample shows how to integrate Paho's MQTT Packet Library to create
a MQTT publisher and subscriber application with Zephyr.
Change-Id: I1cb4124386752eef6187a56ccc9f6fd7fe7175a3
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Since firq utilizes a 2nd register bank, and since all of those
many GPRs can be used, the strategy here is to save extra registers,
such as lp_count, lp_start, lp_end into callee saved registers.
These registers are safe to use because the C-ABI followed by the
compiler will cause these to be spilled to the stack if a C function
wants to use them. By selecting upper GPRs, r23-r25, it is very unlikely
the compiler will spill them. This improvement, therefore, can avoid a
d-cache miss since we are avoding memory altogether when saving these.
The struct firq_regs is no longer needed.
Change-Id: I7c0d061908a90376da7a0101b62e804647a20443
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Generate kernel image in Intel Hex format when building for the nRF52.
Remove the additional step from the board doc file.
Change-Id: I619496f64037c2a0ac459ae05e549e01458e0f71
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Do not redefine the the pinmux configuration for the board, just use
the data directly. No other board will be using those, just the galileo.
Change-Id: If774bc5c4335021ae58a682224f092db23bc9f1b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move pinmux defintions under board/<board> and have all board
configuration in one single place.
Change-Id: I055b024384fae2938881b1c57d8ce7426e732e92
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If the CPU is ARC, define timestamp_serialize() to be an
empty macro so that this test builds properly.
Change-Id: I36f00dd429972b610c327cbe59bedb24b33553ed
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Used to say "ISR to back to". Now says "ISR back to".
Change-Id: I568306f6653096799ec22ea21cdb9ebee42ac359
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
It was found that the test latency_measure, when compiled
for microkernel, would fail on the ARC. This because the
trap handler, used by irq_offload, wasn't supporting thread switching.
This submission adds the code to do that, and the code size is
bigger only when CONFIG_MICROKERNEL is defined.
To keep code a bit smaller, there is a trick exploited here where
the AE bit is cleared in the STATUS32 register and in AUX_IRQ_ACT,
bit 1 is set, to make it appear as if the machine has interrupted
at priority 1 level. It then can jump into some common interrupt
exit code for regular interrupts and perform an RTIE instruction
to switch into the new thread.
test/latency_measure/microkernel now passes.
Change-Id: I1872a80bb09a259814540567f51721203201679a
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Moved setting of specific Cortex-M compiler flags in each SoC directory
unify setting them in the arch/arm/soc Makefile.
Add flags for Cortex M0, M0+, M1, M3, M4, and M7. However only
CONFIG_CPU_CORTEX_M3 and CONFIG_CPU_CORTEX_M4 are supported at this time
As part of this change converted Kbuild files for some SoCs into
Makefiles as the Makefiles would be empty otherwise.
Change-Id: Ie4e0178b141ca761ec482a610ae50e94fe58070f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a soc-cflags, soc-cxxflags, and soc-aflags as a means for
SoC specific compiler flags to be set without manipulating Kbuild
options directly.
Change-Id: I2c8f5019fb237429e59717ef96bd4251a61dc1a5
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Quark D2000 uses the IRQ 10 for the APIC timer interrupt, this
cause a conflict with the "random" IRQ for the footprint benchmark
Change-Id: Iead18821af307832d54b0c9f3db5e52413ba670b
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
ecc_make_key declaration has random size of NUM_ECC_DIGITS * 2 but
definition has (and use) only NUM_ECC_DIGITS.
Change-Id: I18f0d7992b21a2ed7ed99851b1b795cff0a08a10
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
DHCP client support provided for IPv4 over ethernet.
Change-Id: Ia89bc4123842cf109813b80a90b70cf50cc52e0a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Provide pcap support for echo-apps with PCAP=<filename> option.
For pcap support:
make server NET_IFACE=qemu PCAP=sample.pcap.
without pcap support:
make server NET_IFACE=qemu
Change-Id: Iad90064e0c32134f9c2fda7b28e2cbca1e4e931c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The echo-server should work just fine even if the multicast
context cannot be get. By default there are only two contexts
so the multicast would fail always anyway and the program
would not run properly.
Change-Id: Ia9737cbda4a933a208aae020f055f0b6062b4f47
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier default was 8, new default is 4.
Change-Id: I99c9d2aae465fd0feb968efa7417cd28bafd73b8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier default was 10, new default is 2.
Change-Id: I307a4abaad34223254fd32e1fd4357892a04a2d0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier default was 10, new default is 2.
Change-Id: I938449d840a244a13e9b9b954648577b76db00bc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network context is similar concept as network socket.
Depending on application use, the number of contexts can be
now tweaked. Default value is now 2, it was 5 earlier. Using
the lower number saves 241 bytes of memory.
Change-Id: I6e2a9f053c8c63163af6d6175783233f67553ae9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
