Similar to '==' but compiles the RHS into a regular expression
and attempts to match whatever is in the environment against it.
Change-Id: I7a03452ef88d067b62661d14dc6f42273de436fa
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Do not use the QMSI specfic define, use the one define in the
i2c API instead.
Change-Id: I979673e35060d041cb97f4de178069e2bdfd2c7b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
BT_DEV_ENABLE flag value must be preserved after HCI reset is complete
to not allow calling bt_enable more then once.
Change-Id: I77bf6111d4fc2a209e0c5a56717decba156068a6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Print commands names when matched instead of first creating
completion string in buffer. Common part of commands names
can only be reduced when matching further commands so only
first match needs to be kept for altering command line.
Change-Id: I5a9d2eb171ef4d31da9cbe6e93b577457b13c5a2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
I see in the TOP makefile that if FLASH_SCRIPT is undefined,
it outputs the message "Flashing not supported with this board".
This behavior is wanted currently as this board does not
have a memory mapped FLASH device. It has a SPI-FLASH and
there are different instructions for putting an image on to the board.
Change-Id: I07dcdd9a7fd8346b846ee0fe1312d22f9ffaa13e
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Use the more explicit net_buf_get_timeout() call where it makes sense
(e.g. where we always want to wait or never want to wait).
Change-Id: Id1eabe0ad2f9fa79f7be39e51fefa5161f9cc550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this API it's possible for the caller to force specific behavior
when it comes to waiting (or not waiting) on the FIFO.
Change-Id: Ib66e2f767c26c82abf1ba3b80bd15aec2383542e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tinycrypt is maintained at github and thus should be treated as an
external library and hosted under ext/.
Change-Id: I4c4a3bcdacf01d4922919e5ea1f9dec21a19cd37
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver for the HTS221 sensor was added with the wrong type stated in
the Kconfig file, as it is a temperature and humidity sensor and not a
magnetometer.
Change-Id: Icc50c9b7ccc491b1c22e13d00607123a45338b11
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Marketing is telling me to switch URLs for the EM Starter Kit
board story.
Change-Id: I342849d1085330eb9e5e88f08374bb5889695702
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
There are a few problems with the code being repaired here.
1. A seti was used to re-enable all interrupts, even though the
thread being switched to may have had certain interrupt priorities masked.
2. saved status32 already has SC bit if thats wanted, so its ok to just
restore status32 as-is w/o needing to and off anything.
3. the code is difficult to write using kflag and seti because as you
restore registers, there aren't any to use. But we can exploit a
trick where we pretend an interrupt has occured by setting a bit in
AUX_IRQ_ACT, and then use RTIE instruction to restore status32
atomically with branching to return address. Something about the way
this code was written was causing stack corruptings and crashes in an
application that uses a high rate of both FIRQ and Regular interrupts.
Change-Id: Ia7166d51f0e750c07832ab115b7151ce37ee0278
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Add driver for LSM6DS0 accelerometer, gyroscope and temperature sensor.
Change-Id: Ic04fa8d0bbf935e7f04ed7981554d8095ceb5ccf
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
The Bluetooth logs use format specifiers available with printf but not
with printk. Selecting STDOUT_CONSOLE enables printf support, which
makes the logs readable again.
Change-Id: I3e86f0bcf31688148a340eba6cdf33e81c64393d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Check that callback is defined before call, fixes issue in
on_nble_sm_status_evt calling cancel callback.
Change-Id: Ie2f49ed6e441f4260dacd16120e09f892c1fd528
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This replaces use of delayed fiber with nano_delayed_work which uses the
system workqueue fiber and stack.
Change-Id: Ie127fc5eb6f38b38df072154a702d4efc34ed9f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will allow the driver to be safe from fibers and task
Jira: ZEP-411
Change-Id: I714f22c8df7002c45bed981c493e11af91c70d93
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
It is now safe to introduce the callback since nano_timer_init now
calls _nano_timeout_init which does takes care of initializing all
the fields properly.
Change-Id: I5735eeebef233a0a541ec8b2a354b65da98082fc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the introduction of _nano_timeout_init it prefered to call it
to initialize the _nano_timeout fields properly.
Change-Id: I83e9c63f9bb2903c508264d1199d2c687c330ec8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The locking and synch mechanisms were configured after the interrupts
for the I2C controller are enabled, now the configuration is done before
the enabling of the interrupts.
Jira: ZEP-419
Change-Id: Ia1b0e790b9f5f8e7560cc3556b7a0f394048d171
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This will allow the driver to be fiber and task safe
Jira: ZEP-410
Change-Id: I61d3d9e4128bae781f1c86c07af79eb6e43ebeda
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This will allow initializing a nano timeout that is not associated with
a thread.
Change-Id: Ic71175b0059396b19a0e3616f4fab570071c3d48
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a delayed version of nano_work API which is useful when
handling timeouts since the same stack/workqueue can be shared.
Change-Id: Iac43796fe96deb0a9c8976c91a65104b57779b00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If we use doc/* maintainer will only take care of files inside
doc/__. Instead if we use plain doc/ maintainer will be responsible
for all the content inside doc directory.
Change-Id: I1b69667a42231d3de826413eb5aa281b7f68d61a
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Remove erroneous initialization of 'data' via memset.
Set keep alive interval to 0.
Change-Id: I5da4649985efd39b37bbbdc6ae21a856f9e40b13
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Currently enable procedure can be called only once regardles if it
failed or succeeded.
Change-Id: I3869e97442720860baba7bb1b7610738ca95561a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Using atomic flags instead of bool allows adding new states easily
without aditional memory footprint.
Change-Id: I0289a49af8353dc832a33e16ebdd6651c3913fe3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Remove NBLE_GAP_SM_EVT_START_PAIRING handling since this is handled
now in the special pairing event and defer negative status handling to
the actual event code processing.
Change-Id: I232d9e5ecd09b2600df3ff04128dfb7f71a2eae2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement bt_smp_auth_passkey_entry() and bt_conn_auth_passkey_entry()
functions to be used by apps and tester.
Change-Id: I600284334c67840dd0c17991596ad31986bf0afd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This moves SMP related code to smp.c making code similar to the tree
of firmware developers.
Change-Id: I5b43dcbe40a721e11b64cbdd4203406e721f40cd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add a MQTT interactive shell that can connect, disconnect, subscribe,
publish, read published messages and ping to the MQTT gateway.
Origin: Original
Jira: ZEP-364
Change-Id: Ie85e7b8b9290cb8e80548886aea74a8427b2323b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Set CONFIG_IP_BUF_RX_SIZE and CONFIG_IP_BUF_TX_SIZE to 4.
Modify mqtt_publish_read to retrieve topic name and message as strings.
Change printf for printk.
Change-Id: I6746846cb3359096d87dfbb3134d6a3a95bf087e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
