This API has been deprecated and scheduled for removal.
It was only implemented on X86, and ARM systems that
aren't XIP.
Static exceptions (only implemented on x86) will
continue to be tested by test_static_idt.
Change-Id: I6d63347ead8200002ee1edd8dd4572b418800400
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since the root Makefile already provides a HOST_OS
environment variable that is exported by using uname,
make use of it in the Kconfig Makefile.
Change-Id: I13655a5295bbcd9f2fdfa8b6309634c1ab143f70
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
tcpip_poll_tcp() was changed with commit 61edc68c to take on a
data_buf parameter, which was then processed as the primary
buffer. That change led to incorrect behaviour where the handling
of the first data buffer on a connection got mixed with the SYN buf.
It is no longer clear why tcpip_poll_tcp() was modified with the
change 61edc68c originally. Reverting the modification to
tcpip_poll_tcp() leads to much better handling of TCP data; and
also obviates another pull-request submitted recently:
https://gerrit.zephyrproject.org/r/#/c/4226.
Change-Id: I947c0991495c538c41e6581c8d360526b1bb89ad
Signed-off-by: Rohit Grover <rohit.grover@arm.com>
Adjust the data pointer passed to a udp_socket_register() registered
callback to point to the udp data contents rather than the header
information.
Change-Id: Ib90eee91e0ec4d0290517fee7b929d39ce3e07c6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
If retries are 0 (which should never be), ret will not be initialized.
Change-Id: I8ef9a2ccbf89191e48d407fdb1292554fa8f15d9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some test cases and samples require ARCH being specified. In TCF, that
information is carried by the BSP variable.
This is a workaround hack to a historical carry over that should be
removed once the extra work to do so is completed (ZEP-754). Tagged as
such.
Change-Id: I640efce3e65f46473443c5413807cdc7cdfd8be8
Jira: ZEP-760
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
According to commit 2055b06e ("quark: move pinmux files to board"),
drivers/pinmux/quark_mcu/ was deleted, so remove it from the Makefile.
According to commit 0ae2e895 ("remove custom pinmux for quark and use qmsi"),
pinmux_dev_quark_mcu.c is no longer compiled into image, so delete
this unused file.
Change-Id: Ied63cd3b06e8225205c5f1b3e5a675c387acb5ad
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Treat the sensor subsystem as an independent board that can send
messages to UART and disable IPM and the messaging interface. IPM
can be enabled by applications that require such interface.
Fix all samples that are affected by this change to make sanitycheck
pass.
Jira: ZEP-451
Change-Id: I3df6af16adefaefec02b97778d6c68ffc920ac35
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also, SPI 0 isn't specific to Intel, make it a generic message. This patch
only fixes the cosmetics w/o changing undering Kconfig option names.
Change-Id: Ia58f9537c594004a1b5fb8b4af21d7e8b729efb7
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
This driver was not included in the original ksdk import, but is needed
to use the ksdk ethernet mac driver.
Origin: NXP KSDK 2.0
URL: kex.nxp.com
Maintained-by: External
Change-Id: Id56037f9c8255dcc18f3eb6792080ace8c7eacd3
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Initialization code in nano_init.c gated by the config parameter
CONFIG_CUSTOM_RANDOM_GENERATOR is out of step with the rest of the
tree where support for this config parameter was removed by
commit 27bcb431cb ("Random number generator driver unification")
Change-Id: If6086fd85e61579c646d09029ef129e8a3b464b8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Include the required files for nRF51. This is to prepare the basic build
infrastructure for nRF51.
Origin: Nordic MDK 8.6.1
URL: https://www.nordicsemi.com/eng/nordic/Products/nRF51822/nRF5x-MDK-Pack/48803
Maintained-by: External
Change-Id: Ie594984cc26acdcefac9f6f6a6748ba673ea261c
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
The ksdk provides a clock driver, fsl_clock.c, for the K64F and an
example usage of that driver, clock_config.c, for the Freedom board.
See ext/hal/ksdk/devices/MK64F12/
Leverage parts of clock_config.c to configure the clocks (specifically,
the sequence in BOARD_BootClockRUN()), but use the new Kconfig options
to set up the configuration structure. This will allow support for new
boards that may have a different external oscillator frequency or type.
Jira: ZEP-715
Change-Id: I3f0c75e6236f57600cd8b7f06f4482b13026fc10
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Added support for multiple toolchain usage.
Every arch contains a list of supported toolchain.
Each board can override the supported toolchain list.
If the board is not supported in the current toolchain,
will be discarded.
The current toolchain is defined by ZEPHYR_GCC_VARIANT.
Added support for toolchain ISSM and ZEPHYR.
Change-Id: I31e9b39ba01f6e9bdc4557702428cd09e05f492a
Jira: ZEP-592
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Fix i2c failure seen on fast plus mode. With higher data
rate, signal ramp time becomes longer. The ramp time
required by the controller needs to be loosened.
Jira: ZEP-711
Change-Id: Icffa334ec3f059564e333d3b0759a11d1bebc5e4
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
ARCH is defaulted to be x86. This makes it somehow impossible for later
the board code to set it properly when it needs to be evaluated in a
top level makefile for a project.
By undefining it, a lazy resolution is forced that works its way to
the proper Kconfig set by setting BOARD, which should be the ONLY
mandatory argument (to avoid things that will fail like BOARD=galileo
ARCH=arc).
Jira: ZEP-690
Change-Id: I5b10922eb4cdb559ab5fe354bc91c9ffb92f0ca8
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Many Kinetis SoCs contain an Oscillator (OSC) module and a Multipurpose
Clock Generator (MCG) module to configure clocks. Adding options to
configure these modules for PLL operation with different external
oscillator frequencies, which can vary across boards. More options may
be added later to support other clocking modes such as FLL.
Jira: ZEP-715
Change-Id: Ia121cc5b464d7e681883507bd756d331a8abd6ef
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The toolchain headers included an abstraction for defining symbol
names in assembly context in the situation where we're using a
DOS-style assembler that automatically prepends an underscore to
symbol names.
We aren't. Zephyr is an ELF platform. None of our toolchains do
this. Nothing sets the "TOOL_PREPENDS_UNDERSCORE" macro from within
the project, and it surely isn't an industry standard. Yank it out.
Now we can write assembler labels in natural syntax, and a few other
things fall out to simplify too.
(NOTE: these headers contain assembly code and will fail checkpatch.
That is an expected false positive.)
Change-Id: Ic89e74422b52fe50b3b7306a0347d7a560259581
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These needlessly confuse the parser. Define them as empty
predefined macros.
Change-Id: Iac6a909f278e1f8a757410612f64b1c46f67ff41
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The uip stack processes received packets by calling net_recv() but
does not discard packets marked with an ethertype other than IPv4 or
IPv6 resulting in confusion further up the stack. Discard non IPv4/v6
packets from further processing by the IP stack.
Change-Id: Ic62f8d12b02da197b1abc774a581bff30330080c
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Each tagged version of the documentation associated with a build is
available on the website. This patch adds the link to the 1.5.0 version.
Change-Id: I664ec08598eacbdccbdfb1a5cec3791ea879edb0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Removed tests that will fail when using ISSM toolchain because
there is no g++ inside.
Example:
export ZEPHYR_GCC_VARIANT=issm
export ISSM_INSTALLATION_PATH=<ISSM PATH>
sanitycheck -p arduino_101 -p arduino_101_sss -p quark_d2000_crb \
-p quark_se_devboard -p quark_se_sss_devboard
Change-Id: I532d4f0e0095472cbf3428cb8355167a320a10a0
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Added support in the sanitycheck to use env variable
value in the filter.
Change-Id: I76388dc04557dcd31e651d23ae8edf96a8fe2474
Jira: ZEP-592
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
