As part of devicetree update to new devicetree.h We Need to convert
as use of DT_ARM_CORTEX_M4F_CLOCK_FREQUENCY to
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency) in the hal_ti for the
msp432p4xx SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Certain Qualcomm controllers do not accept our settings for Host Buffer
Size:
< HCI Command: Host Buffer Size (0x03|0x0033) plen 7 #19 [hci0]
22.391048
ACL MTU: 27 ACL max packet: 6
SCO MTU: 0 SCO max packet: 0
> HCI Event: Command Complete (0x0e) plen 4 #20 [hci0]
22.391525
Host Buffer Size (0x03|0x0033) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Likely due to the fact that we do not reserve space for any SCO packets
in the Host.
Other Controllers (Realtek) seem to not transmit any data at all in the
Controller to Host direction if Controller to Host flow control is
enabled.
Document this fact in the User Guide so that users know what to do when
this happens.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Convert linker scripts and arc_mpu_regions.c setup to use new
devicetree.h macros to extract the base address and size of the various
memory regions (DDR, SRAM, FLASH, DCCM, ICCM). We also remove the
scaling up and down since DT_REG_SIZE() returns the value in bytes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit cleans up the section name definitions in the linker
sections header file (`include/linker/sections.h`) to have the uniform
format of `_(SECTION)_SECTION_NAME`.
In addition, the scope of the short section reference aliases (e.g.
`TEXT`, `DATA`, `BSS`) are now limited to the ASM code, as they are
currently used (and intended to be used) only by the ASM code to
specify the target section for functions and variables, and these short
names can cause name conflicts with the symbols used in the C code.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
API documentation for parameters that accept a duration specified in
milliseconds is updated to replace references to K_NO_WAIT with 0, and
K_FOREVER with SYS_FOREVER_MS.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Substitute integral constants where call sites passed named constants
that have timeout values as arguments to parameters that expect
millisecond durations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some API that takes timeouts represented by integral milliseconds
recommended using the K_NO_WAIT and K_FOREVER constants, which are no
longer integers. This script replaces the incorrect arguments with
the corresponding legacy integral value.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
OSX compatibility added bossac runner.
Linux behvaiour is unchanged.
Window is now explicity mentioned as incompatible
Signed-off-by: Brendon Le Comte <brendon.lecomte@gmail.com>
Rework x86 linker scripts to use DT_REG_ADDR/DT_REG_SIZE on
DT_CHOSEN(zephyr_sram) and DT_CHOSEN(zephyr_flash). As part of this
we remove the dts_fixup.h. Using DT_REG_SIZE means we don't have to
adjust the sizes by 1024.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace DT_PHYS_RAM_ADDR and DT_RAM_SIZE with DT_REG_ADDR/DT_REG_SIZE
for the DT_CHOSEN(zephyr_sram) node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Do not assume in the SoC level device trees that NXP Kinetis FlexTimer
nodes will always be configured as PWM. Instead, configure FlexTimer
nodes for PWM at the board level for NXP Kinetis boards.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove dts_fixup.h files that are needed anymore, remove defines that
are used, and replace defines with new DT macros.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add ESP-8266 modules shield. The ESP-01 needs to be loaded with
ESP8266 AT Bin V1.6.2 which is compatible with ESP8266 AT Bin
V1.7.x which is the minimal supported version by ESP WIFI driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Fix detailed API description rendered into text boxes.
API documentation with more that one paragraph must use the @brief tag
to be rendered correctly.
Fix indentation level of '*' in doxygen documentation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Struct members are not always documented in the zephyr online HTML
documentation. Enable it for all Bluetooth related documentation
groups.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The goto instruction was removed when adding the RX thread.
While still working, this clearly break the clean handling of
error cases.
Re-instantiate the goto instruction.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
ipm_busy is meant to be used as mutex on transport layer accesses.
Due to wrong configuration on rx_thread, imp_busy was a no-op.
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Split BT_CTLR_CONN_RSSI option into two, the base option enables the
Read RSSI command, while the new BT_CTLR_CONN_RSSI_EVENT enables the
connection RSSI events. There is no handling of RSSI events, only a
BT_INFO log.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update EDTT default configuration to make it easier to debug. The
use of maximum log level to restrict default output caused some
confusion. Instead remove debug options to reduce the default log
output. Enabling debug logs is now similar to other samples and tests.
Remove options commented out, no need to keep them.
Move comment to the matching CONFIG.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adding RFC1350 compliant support for TFTP Client in Zephyr. The
current implementation is minimal and only supports the ability
to get a file from the server.
Things for the future include support for putting files to
server and adding support for RFC2347.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
The bluetooth subsystem is now fully compatible with the new timeout
API, so remove the selection of the legacy API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth samples or board samples using bluetooth to use the
new k_timeout_t struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth mesh to using k_timeout struct. Many of the mesh
modules uses timeout calculations, so it is most practical to keep
the s32_t type and only initialize a k_timeout_t struct when
calling the kernel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth host to using k_timeout_struct for the timeout values.
This is mostly replacing s32_t with k_timeout_t.
In l2cap the handling of no timeout in send channel request was removed
since the timeout is both documented as minimum of 1 second and never
given any no timeout value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth controller to using the new k_timeout_t API so that
CONFIG_LEGACY_TIMEOUT_API can be turned off.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The board efr32_radio_brd4250b replaces this removed board. This
commit removes this duplication.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The HTML documentation generation does not work properly if
we try to put more than one board into same directory. So rename
the directory to reflect this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to avoid retransmissions from the peer's side
on full-close, handle states properly.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Replace DT_SNPS_ARCEM_0_CLOCK_FREQUENCY with a PATH based reference
to cpu@0 (DT_PATH(cpus, cpu_0)) and than getting the clock_frequency
property:
DT_SNPS_ARCEM_0_CLOCK_FREQUENCY ->
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from DT_MMIO_SRAM_10000000_BASE_ADDRESS to
DT_REG_ADDR(DT_NODELABEL(ddr0)) and similar for
DT_MMIO_SRAM_10000000_SIZE to DT_REG_SIZE().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We want to limit DT_ prefix to macros from devicetree.h and generation.
So rename DT_LIS2DH_INT* to just LIS2DH_INT*.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We want to limit DT_ prefix to macros from devicetree.h and generation.
So rename DT_INST_AT2X* to just INST_DT_AT2X*.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We want to limit DT_ prefix to macros from devicetree.h and generation.
So rename DT_INST_MCP320X* to just INST_DT_MCP320X*.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
