Move from a Kconfig to select/initialize the MAC address to using the
"local-mac-address" property in devicetree. If the property is set the
drivers will initialize the mac-address from the devicetree (unless the
mac address is all 0's). The MAC address might get overwritten by
either a driver specific means or by the setting of
"zephyr,random-mac-address" in the devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Utilize the devicetree property "zephyr,random-mac-address" to determine
if a driver should use a random mac address and remove the associated
Kconfig options that enabled this feature.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add definition of zephyr,random-mac-address property that conveys to a
driver to utilize a random MAC address if the driver supports this
feature.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than having each driver have its own slightly different way of
generating a random mac address, add a helper function that they all can
call so we do it one way.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds a `tfm_level_1` samples app that shows how
to use the PSA APIs in IPC mode in a real-world example.
It makes use of the crypto, initial attestation and secure
storage modules.
Signed-off-by: Kevin Townsend <kevin@ktownsend.com>
This commit adds a minimal sample application showing how
TF-M can be used in IPC mode, with Zephyr providing the
non-secure processing environment image, and linking against
the PSA APIs implemented in TF-M.
This commit also include work from the commit quoted below,
which is included here for attribution purposes:
tfm_ipc: cmake: now using tfm_ipc library created by TF-M module
This commit removes the need for local knowledge of the TF-M
repository structure and files.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
This commit adds support for TF-M to the MUSCA B1.
When the CONFIG_BUILD_WITH_TFM flag is set, a secure and
non-secure processing environment image pair will be
generated, with the Zephy application image running on
the non-secure side.
The secure and non-secure binary images will be signed
for use with the BL2 secure bootloader.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
This commit adds support for TF-M to the MPS2 AN521.
When the CONFIG_BUILD_WITH_TFM flag is set, a secure and
non-secure processing environment image pair will be
generated, with the Zephyr application image running on
the non-secure side.
The secure and non-secure binary images will be signed
for use with the BL2 secure bootloader.
An additional .hex file is also generated to enable
running QEMU with the AN521 binaries, `tfm_qemu.hex`,
which can be executed with the `-t run` option with
west, or `run` with ninja or make.
When configured for use with TF-M, the
`mps2_an521_nonsecure` board definition should be used.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
This commits adds a config option to build a PSA trusted-firmware-m
(TF-M) application image for the secure processing environment, and
configures the Zephyr application image for the non-secure processing
environment. The secure and non-secure environment images will be
linked together via the veneer function table that is produced as an
artifact of the TF-M build process.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
PSA level 1 requires secure boot. TF-M BL2 is the official
secure boot loader. It needs a BL2_HEADER_SIZE offset.
Align nonsecure address with TF-M's NS slot while TF-M BL2 enabled.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add infineon XMC4 series UART support. Driver supports
only poll mode using XMCLib.
Out of 4 available UART's on SoC, only UART1 is confgired
by default in UART mode until GPIO & pinctrl support.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Add infineon xmc series with XMC4500 support. XMC series comes with,
- CPU operates upto 120MHz
- 3 RAM (PSRAM1 - code, DSRAM1 - data and DSRAM2 - communiation)
- upto 1MB flash
init: clock control & gpio is not done, so SoC initialization directly
relies on HAL. Core operating clock is stored in no_init section, which
is kept under DSRAM1. Only DSRAM1 is used until clock support. Using
PSRAM1 and DSRAM1 needs adaptation in linker script - planned for next
revision.
Note: SystemInit cannot be consumed directly due to vector table +
HAL linker dependency.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Fixed masking defines for eSPI OOB RX and TX transfer
length registers. The transfer length fields are 13 bit.
The incorrect defines masked 14 bits.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Some platforms have slow system clock resulting in not very
accurate latency measurements. This updates how the timestamps
are obtained by copying the mechanism from the timing_info test.
This allows using alternate higher speed timers to measure
latency.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both ST and STM32 modules where using same HAS_STLIB Kconfig
symbol.
Now that each module is createing is own lib, we need to be able
to distinguish libs.
Depends on zephyrproject-rtos/hal_stm32/pull/52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use DT_INST_SPI_DEV_HAS_CS_GPIOS() in drivers to determine if we should
utilize CS_GPIO base SPI chipselect handling. This allows us to remove
Kconfig option for this feature.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Updating the eswifi driver to indicate "scan completion"
to WiFi Management once scanning is done.
Tested with STM32 disco IOT kit.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Catch ImportError whenever a non-standard module import fails from any
runners that do one. Complain at runtime about it if the user actually
needs the runner.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add initilizations for:
- Cortex-A72 L2 Controller configurations. This initialization to
be done when cluster is in quiscent state.
- 'ICC_SRE_EL3' init to allow GIC V3 ICC_SRE_ELx system interface.
This initialization can be done at 'EL3' only.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This change enables specific compiler and linker options to be used in
the case that an arch/posix/os.arch.cmake file exists.
Note: os and arch in the above case are evaluations of
CMAKE_HOST_SYSTEM_NAME and CMAKE_HOST_SYSTEM_PROCESSOR.
Otherwise, the existing "generic" compiler and linker flags in
arch/posix/CMakeLists.txt are used.
Additional flags and checks are provided in
arch/posix/Linux.aarch64.cmake.
Added scripts/user_wordsize.py to detect if userspace is 64-bit or
32-bit, which should be consistent with the value of CONFIG_64BIT
for Aarch64 on Linux.
Fixes#24842
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Added support for native posix boards to flash_simulator tests by
making sure that flash layout lines up with layout expected by
tests.
Resolves#25109
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
For HPET devices, configure it with fixed delivery mode because HPET
timer interrupt is needed to fuel the scheduler for all CPUS.
For all other type of devices, like UART, I2C, GPIO, Ethernet, etc.
configure them as lowest priority delivery mode, in which IO APIC
delivers the interrupt to the processor core that is executing at the
lowest priority among all the processors listed in the specified
destination. In this case, the device drivers can avoid the trouble of
handling repeated interrupts delivered to all CPUS.
Signed-off-by: Zide Chen <zide.chen@intel.com>
Currently all IO APIC interrupts are configured at fixed delivery mode,
which is good for HEPT timer interrupt but it imposes burdens to
device drivers to properly handle the repeated interrupt sent to all
processors.
This patch makes it more flexible so that device drivers can specify
the delivery mode it desires in the IRQ connect APIs.
- Don't hard code IOAPIC_FIXED in z_ioapic_irq_set(), meaning the
IRQ delivery mode is passed in from the 'flags' argument and
individual device driver needs to choose delivery mode for its own
IO APIC interrupt.
- To support different delivery mode in different IO APIC interrupts,
need to save and restore RTE[10:8] during IOAPIC suspend and resume.
If device driver doesn't pass either IOAPIC_FIXED or IOAPIC_LOWEST
in IRQ_CONNECT()/irq_connect_dynamic() alike APIs, the delivery mode
bit fields in the target RTE register are '0' which implies fixed mode.
If the device driver wants the interrupt to be delivered to one CPU
only, it needs to explicitly specify IOAPIC_LOWEST in one of the IRQ
connect APIs.
Signed-off-by: Zide Chen <zide.chen@intel.com>
Currently IO APIC is working in physical destination mode, which
doesn't support interrupt to be delivered to multiple local APICs.
By definition only 4 bits [59:63] in IO APIC IOREDTBL register are
available for destination addresses and it contains an APIC ID only.
This patch changes it to logical destination mode so that IOREDTBL
can potentially define a set of processors and it's posible to deliver
interrupts to multiple APICs.
Signed-off-by: Zide Chen <zide.chen@intel.com>
If IO APIC is in logical destination mode, local APICs compare their
logical APIC ID defined in LDR (Logical Destination Register) with
the destination code sent with the interrupt to determine whether or not
to accept the incoming interrupt.
This patch programs LDR in xAPIC mode to support IO APIC logical mode.
The local APIC ID from local APIC ID register can't be used as the
'logical APIC ID' because LAPIC ID may not be consecutive numbers hence
it makes it impossible for LDR to encode 8 IDs within 8 bits.
This patch chooses 0 for BSP, and for APs, cpu_number which is the index
to x86_cpuboot[], which ultimately assigned in z_smp_init[].
Signed-off-by: Zide Chen <zide.chen@intel.com>
We don't need sanitycheck's use of EDT to report warnings, we'll get
them from the build system. So the warnings are just duplication and
noise, thus lets always suppress them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Swap this out and make the status a parameter.
Leave a couple of cases of DT_NODE_HAS_COMPAT().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add more HOWTO information for the two current devicetree-based device
instantiation styles, and a bit more information on how to create
devices that depend on others.
Point to this from the Kconfig tips page, since it is meant as a
replacement for existing Kconfig practice.
Update macros.bnf.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These are redundantly checking a node's status twice.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Even though it is about to be done for sound technical reasons, a
subsequent patch adding access to all device nodes at the last minute
in the 2.3 release is going to be playing a bit of a fast one on
the Zephyr community, especially users of DT_INST APIs.
In particular, instance numbers are currently allocated only to
enabled nodes, but that will not be true soon: *every* node of a
compatible will be allocated an instance number, even disabled ones.
This is especially unfortunate for drivers and applications that
expect singletons of their compatibles, and use DT_INST(0, ...) to
mean "the one enabled instance of my compatible".
To avoid gratuitous breakage, let's prepare for that by sorting each
edt.compat2nodes sub-list so that enabled instances always come before
disabled ones.
This doesn't break any API guarantees, because there basically *are*
no ordering guarantees, in part precisely to give us the flexibility
to do things like this. And it does help patterns that use instances 0
through N-1, including the important singleton case.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add API for recovering an I2C bus. This API can be used to recover
from situations where the I2C master and one or more I2C slaves are
out of synchronization (e.g. if the I2C master was reset in the middle
of an I2C transaction or if a noise pulse was induced on the SCL
line).
Fixes#23441.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The '_' is not necessary, plus it makes the sys init object name
aligning with all others.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
init_fn is not anymore part of struct device, so let's test instead the
driver's API structure pointer which is also unique per device driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
device_api attribute is not at offset 4 but 8 now as name and
config_info has been directly imported into struct device.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
