Add new config option `LWM2M_DNS_SUPPORT` to the LWM2M library, instead
of relying on `DNS_RESOLVER` which is only compatible with native
network stack. This allows to use DNS with offloaded interfaces
seamlessly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is related to commit 1a6f4a6368 ("net: tcp: Accept
connections only in LISTENING state") which made the system
to only accept new connections if the application had called
accept(). Unfortunately the TLS accept was not fixed by that
commit so we were in wrong state when accepting TLS sockets.
This commit fixes that issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
os.mkdir() is not suitable to create arbitrary directory path (can
create only a subdir of an existing dir, will error out if already
exists), os.makedirs() should be always used in such cases.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We replace an inline assembly block of code with CMSIS
functions, to make it portable to ARMv6-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is an optional feature and no logic for it should
be present unless CONFIG_IRQ_OFFLOAD is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Line up everything nicely, add leading '0x' to hex
addresses, and remove redundant newlines. Add
whitespace between the register name and contents
so the contents can be easily selected from a terminal.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix incorrectly calculated ticks slots for a connection on
connection update. The reservation incorrectly included the
prepare offset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in bt_gatt_attr_next when given an attribute that has static
allocation. The handle is then 0 and the function would always return
the attribute with handle 1.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation issue when wanting to use whitelist in bluetooth
applications that does not have CONFIG_BT_CENTRAL defined.
These functions are useful even for broadcaster and observer roles.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add public API function in GATT to check if a specific connection has
subscribed to the given attribute.
Without this function the application has to keep track of which
connections has subscribed using the callbacks from BT_GATT_CCC_MANAGED
since the cfg_changed callback of the CCC doesn't carry connection
context.
The other alternative is for the application to parse the information
in the struct _bt_gatt_ccc object. Although this object has structure
information available to the application the structure is marked as
internal, so the application shouldn't rely on this definition.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for persisted Service Changed data, to fix the case of a
paired device not reconnecting before a reboot and thus not receiving
SC indication. It also enables support for GATT database being changed
during a firmware update.
Move Service Changed data outside of the CCC struct and make it
persistent by adding support for a bt/sc/... setting.
Signed-off-by: François Delawarde <fnde@oticon.com>
The Service Changed characteristic support should also work when the
GATT database has been modified after reboot (firmware update scenario)
This commit introduces a BT_GATT_SERVICE_CHANGED config option that is
independent from BT_GATT_CACHING and BT_GATT_DYNAMIC_DB.
Signed-off-by: François Delawarde <fnde@oticon.com>
Previously, if two bindings had the same 'compatible:'/'parent-bus:'
values, the binding that happened to be loaded last would get used.
Turn it into an error instead. This avoids tricking people into thinking
that bindings get loaded in a defined order.
Maybe overriding bindings could be allowed later, if we need it.
Fixes: #19536
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Simplifies the code a bit.
Looks like the description wasn't rstrip()ed when it came from a
'child-binding:' either. This also indirectly fixes that.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A socket-offloaded interface should bypass interface initialization in
the same way as net-offloaded interface does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After switching to new SPI API there is no need to reserve first dummy
byte in buffer and ignore that in application later on. Instead two
buffers can be specified, which is how it is done already in lis2dh
driver. The problem is that dummy byte is still part of the buffer, but
it clearly should no longer be. As an example we write 0x7 (bits to
enable XYZ axes) into CTRL2 instead of CTRL1 register. When reading
measurements on the other hand we have filled buffer starting from 0,
instead of 1 as the driver code has expected.
Fix driver in all places that use burst transfers by removing first
dummy byte from input/output buffer.
Fixes: 2f7e6b6d42 ("drivers/sensors: Switch lis2dh driver to new SPI
API")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Modifications in 'is_regular_addr_valid()' function which didn't work
properly when flash base address was different than 0x00000000.
Added calculating address bounds with respect to flash base address.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
The struct definitions for pdpt, pd, and pt entries has been
removed:
- Bitfield ordering in a struct is implementation dependent,
it can be right-to-left or left-to-right
- The two different structures for page directory entries were
not being used consistently, or when the type of the PDE
was unknown
- Anonymous structs/unions are GCC extensions
Instead these are now u64_t, with bitwise operations used to
get/set fields.
A new set of inline functions for fetcing various page table
structures has been implemented, replacing the older macros.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This hasn't been necessary since we dropped support for 32-bit
non-PAE page tables. Replace it with u64_t and scrub any
unnecessary casts left behind.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will be used for both 32-bit and 64-bit mode.
This header gets pulled in by x86's arch/cpu.h, so put
it in include/arch/x86/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some assembly simplifications, to make code common for ARMv6
and ARMv7 architecture.
We can use ldrb, directly for reading the SVC encoding; this
removes the need for ANDing the result with 0xff right below.
We remove an immediate value of 0 from an str instruction, as
it's redundant.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add more documentation and inline explanatory comments in
assembly sources swap_helper.S and userspace.S and remove
redundant/wrong documentation when applicable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARM user space requires ARM_MPU. We can, therefore,
remove the unnecessary #ifdef CONFIG_ARM_MPU blocks
in userspace.S. In addition, we do minor refactoring
in z_arm_userspace_enter(), and z_arm_pendsv(), and
z_arm_svc(), aiming at reducing the push/pop overhead
as much as possible.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Default behavior is to include __FILE__ info with all of the Zephyr
assert macros, __ASSERT, __ASSERT_NO_MSG and __ASSERT_LOC. Setting the
ASSERT_NO_FILE_INFO kconfig option, replaces the __FILE__ with an
empty string, thus removing the file information from the asserts.
The intention here is to allow for code space limited devices to run
with asserts enabled.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This function will be useful in shell when we want to monitor
the amount of bytes transferred and want to clear earlier
statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
application to the network device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
application to the network device driver. The data is calculated
for all network packets and not just for UDP or TCP ones like in
RX statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
network device driver to the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit updates the settings backend documentation
to clearly state that it cannot provide old entities
before the final one.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
