michaelh/zephyr
1
0
Fork 0
Code Releases Activity

dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig

Browse source 
These changes were obtained by running a script  created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:

1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
   #define X Y)
3. Check if that name is also the name of a Kconfig option
   3.a If it is, then do nothing
   3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
       has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
   (.c, .h, .ld)

Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.

Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit is contained in:
Andrzej Głąbek 2018-11-13 15:15:23 +01:00 • committed by Kumar Gala
commit 20202902f2
304 changed files with 5118 additions and 5118 deletions
Download patch file Download diff file Expand all files Collapse all files

12
soc/xtensa/intel_s1000/soc.h
View file

@ -32,16 +32,16 @@
#define IOAPIC_HIGH 0
/* DW interrupt controller */
#define DW_ICTL_IRQ_CAVS_OFFSET CAVS_IRQ_NUMBER(DW_ICTL_IRQ)
#define DW_ICTL_IRQ_CAVS_OFFSET CAVS_IRQ_NUMBER(DT_DW_ICTL_IRQ)
#define DW_ICTL_NUM_IRQS 9
/* GPIO */
#define GPIO_DW_0_BASE_ADDR 0x00080C00
#define GPIO_DW_0_BITS 32
#define DT_GPIO_DW_0_BASE_ADDR 0x00080C00
#define DT_GPIO_DW_0_BITS 32
#define GPIO_DW_PORT_0_INT_MASK 0
#define GPIO_DW_0_IRQ_FLAGS 0
#define GPIO_DW_0_IRQ 0x00040706
#define GPIO_DW_0_IRQ_ICTL_OFFSET INTR_CNTL_IRQ_NUM(GPIO_DW_0_IRQ)
#define DT_GPIO_DW_0_IRQ_FLAGS 0
#define DT_GPIO_DW_0_IRQ 0x00040706
#define GPIO_DW_0_IRQ_ICTL_OFFSET INTR_CNTL_IRQ_NUM(DT_GPIO_DW_0_IRQ)
/* low power DMACs */
#define LP_GP_DMA_SIZE 0x00001000