michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/modules/hal_nordic/nrfx/Kconfig

431 lines
8.1 KiB
Text
Raw Normal View History

ext: Import Nordic MDK header files Nordic Semiconductor's Microcontroller Development Kit provides a set of low-level header files that describe the different hardware registers and peripherals of Nordic ICs. Origin: Nordic MDK 8.5.0 URL: http://www.nordicsemi.com/eng/Products/Bluetooth-Smart-Bluetooth-low-energy/nRF52832 Maintained-by: External JIRA: ZEP-377 Change-Id: Ia28fbaf7333a84ea7462fb7fd7a5d06661a6fce0 Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Vinayak Kariappa Chettimada <vinayak.kariappa.chettimada@nordicsemi.no> Signed-off-by: Håkon Alseth <haakon.alseth@nordicsemi.no> Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-05-25 08:05:08 -07:00
# Copyright (c) 2016 Nordic Semiconductor ASA
license: use SPDX identifier for files in ext/ Change-Id: I32cb4211056046ca28a81aa97aca5d3c0b9b8303 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-01-20 20:22:01 -05:00
# SPDX-License-Identifier: Apache-2.0
ext: Import Nordic MDK header files Nordic Semiconductor's Microcontroller Development Kit provides a set of low-level header files that describe the different hardware registers and peripherals of Nordic ICs. Origin: Nordic MDK 8.5.0 URL: http://www.nordicsemi.com/eng/Products/Bluetooth-Smart-Bluetooth-low-energy/nRF52832 Maintained-by: External JIRA: ZEP-377 Change-Id: Ia28fbaf7333a84ea7462fb7fd7a5d06661a6fce0 Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Vinayak Kariappa Chettimada <vinayak.kariappa.chettimada@nordicsemi.no> Signed-off-by: Håkon Alseth <haakon.alseth@nordicsemi.no> Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-05-25 08:05:08 -07:00
ext: nordic: Add initial adaptation layer for nrfx This commit adds a glue layer that adapts nrfx to be usable in Zephyr as a host environment and files with static configuration of nrfx drivers for several supported SoCs. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-01-17 10:43:01 +01:00
config HAS_NRFX
bool
ext: hal: nordic: Enable building of NRFX QDEC Allow project to use Nordic's NRFX QDEC driver. This closes issue #9364 Jira:DESK-259 Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
2018-09-24 14:27:52 +02:00
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
menu "nrfx drivers"
depends on HAS_NRFX
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
drivers: adc: Add shims for nrfx ADC and SAADC drivers This commit adds translation layers to make nrfx drivers for the nRF ADC (nRF51 series) and SAADC (nRF52 series) peripherals accessible via the Zephyr's API. The SAADC peripheral is accessed using nrfx HAL only as it turns out that usage of the nrfx driver in this case would be inconvenient and would unnecessarily complicate the shim. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-05-21 15:01:08 +02:00
config NRFX_ADC
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "ADC driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_ADC
drivers: adc: Add shims for nrfx ADC and SAADC drivers This commit adds translation layers to make nrfx drivers for the nRF ADC (nRF51 series) and SAADC (nRF52 series) peripherals accessible via the Zephyr's API. The SAADC peripheral is accessed using nrfx HAL only as it turns out that usage of the nrfx driver in this case would be inconvenient and would unnecessarily complicate the shim. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-05-21 15:01:08 +02:00
ext: hal: nrfx: adding clock driver to Kconfig Added configuration option for CLOCK driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-09-28 09:04:24 +02:00
config NRFX_CLOCK
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "CLOCK driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_CLOCK
ext: hal: nrfx: adding clock driver to Kconfig Added configuration option for CLOCK driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-09-28 09:04:24 +02:00
modules: hal_nordic: Update nrfx to version 2.3.0 This PR updates the hal_nordic module revision, to switch to nrfx 2.3.0 and adds new configuration option to enable two stage LFCLK start sequence. Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
2020-08-24 13:38:12 +02:00
config NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "Two stage start sequence of the low frequency clock"
modules: hal_nordic: Update nrfx to version 2.3.0 This PR updates the hal_nordic module revision, to switch to nrfx 2.3.0 and adds new configuration option to enable two stage LFCLK start sequence. Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
2020-08-24 13:38:12 +02:00
depends on NRFX_CLOCK
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
config NRFX_COMP
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "COMP driver"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_COMP
dts: nrf: Add DPPIC to device tree. Add DPPIC to dts. Add HAS_HW_NRF_DPPIC to nrf91 soc. Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
2019-02-07 11:04:08 +01:00
config NRFX_DPPI
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "DPPI allocator"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_DPPIC
dts: nrf: Add DPPIC to device tree. Add DPPIC to dts. Add HAS_HW_NRF_DPPIC to nrf91 soc. Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
2019-02-07 11:04:08 +01:00
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
config NRFX_EGU
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "EGU driver"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_EGU0 || HAS_HW_NRF_EGU1 || HAS_HW_NRF_EGU2 || \
HAS_HW_NRF_EGU3 || HAS_HW_NRF_EGU4 || HAS_HW_NRF_EGU5
config NRFX_EGU0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "EGU0 instance"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_EGU0
select NRFX_EGU
config NRFX_EGU1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "EGU1 instance"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_EGU1
select NRFX_EGU
config NRFX_EGU2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "EGU2 instance"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_EGU2
select NRFX_EGU
config NRFX_EGU3
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "EGU3 instance"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_EGU3
select NRFX_EGU
config NRFX_EGU4
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "EGU4 instance"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_EGU4
select NRFX_EGU
config NRFX_EGU5
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "EGU5 instance"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_EGU5
select NRFX_EGU
ext: hal: nordic: Make it possible to build NRFX GPIOTE and PPI This makes it possible for the application to enable building of the GPIOTE and PPI subsystems in NRFX. Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
2018-10-22 11:50:13 +02:00
config NRFX_GPIOTE
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "GPIOTE driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_GPIOTE
ext: hal: nordic: Make it possible to build NRFX GPIOTE and PPI This makes it possible for the application to enable building of the GPIOTE and PPI subsystems in NRFX. Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
2018-10-22 11:50:13 +02:00
modules: hal_nordic: Add NRFX_GPIOTE_NUM_OF_EVT_HANDLERS option Add option to specifiy number of nrfx_gpiote user handlers in Kconfig. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2022-01-04 08:48:31 +01:00
config NRFX_GPIOTE_NUM_OF_EVT_HANDLERS
int "Number of event handlers"
depends on NRFX_GPIOTE
range 1 15
help
Specifies number of handlers that can be registered to nrfx_gpiote driver
by the user.
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
config NRFX_I2S
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "I2S driver"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_I2S
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
config NRFX_IPC
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "IPC driver"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_IPC
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
config NRFX_LPCOMP
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "LPCOMP driver"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_LPCOMP
ext: hal: nrfx: adding nfct driver to Kconfig Added configuration option for NFCT driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-10-02 13:20:52 +02:00
config NRFX_NFCT
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "NFCT driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_NFCT
modules: nordic: pick proper timer for nfct on nrf5340 Added the NFC Timer default for nRF5340. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2019-12-16 12:08:00 +01:00
select NRFX_TIMER4 if SOC_SERIES_NRF52X
select NRFX_TIMER2 if SOC_SERIES_NRF53X
ext: hal: nrfx: adding nfct driver to Kconfig Added configuration option for NFCT driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-10-02 13:20:52 +02:00
drives/flash: use nrfx for nrf Introduce nrfx_nvmc driver into nordic flash driver implementation. Thanks to that nrf9160 SoC becomes supported by the driver. nrfx helps dealing with differences with interface to the NVMC in secure and non-secure execution modes. This patch adds NRFX_NVMC Kconfig entry for enabling nrfx_nvmc and select it along with nordic flash driver. Disabled UICR operation on nRF9160 for non-secure build as UICR is not available in this mode. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2019-04-01 17:26:05 +02:00
config NRFX_NVMC
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "NVMC driver"
drives/flash: use nrfx for nrf Introduce nrfx_nvmc driver into nordic flash driver implementation. Thanks to that nrf9160 SoC becomes supported by the driver. nrfx helps dealing with differences with interface to the NVMC in secure and non-secure execution modes. This patch adds NRFX_NVMC Kconfig entry for enabling nrfx_nvmc and select it along with nordic flash driver. Disabled UICR operation on nRF9160 for non-secure build as UICR is not available in this mode. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2019-04-01 17:26:05 +02:00
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
config NRFX_PDM
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PDM driver"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_PDM
config NRFX_POWER
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "POWER driver"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_POWER
modules/Kconfig.nordic: Enable NRFX_USBREG together with NRFX_POWER On SoCs featuring the USBREG peripheral, the nrfx_power driver uses the nrfx_usbreg one internally, so enable the latter when the former is enabled. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2020-09-02 13:38:43 +02:00
# On SoCs featuring the USBREG peripheral, the POWER driver uses
# internally the USBREG driver.
select NRFX_USBREG if HAS_HW_NRF_USBREG
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
ext: hal: nordic: Make it possible to build NRFX GPIOTE and PPI This makes it possible for the application to enable building of the GPIOTE and PPI subsystems in NRFX. Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
2018-10-22 11:50:13 +02:00
config NRFX_PPI
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PPI allocator"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_PPI
ext: hal: nordic: Make it possible to build NRFX GPIOTE and PPI This makes it possible for the application to enable building of the GPIOTE and PPI subsystems in NRFX. Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
2018-10-22 11:50:13 +02:00
drivers: pwm: Add shim for nrfx PWM HW driver Adds a translation layer to make the nrfx driver for nrf52 PWM peripheral accessible via the Zephyr's API. Signed-off-by: Justin DeMartino <jdemarti@gmail.com>
2018-05-03 14:40:12 -07:00
config NRFX_PWM
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PWM driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_PWM0 || HAS_HW_NRF_PWM1 || \
HAS_HW_NRF_PWM2 || HAS_HW_NRF_PWM3
drivers: spi: Add shim for nrfx SPI driver This adds a translation layer to make the nrfx driver for the legacy (i.e. without EasyDMA) nRF SPI peripheral accessible via the updated Zephyr's API of the SPI driver. Configuration files are already prepared for adding support for SPIM (Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-03-02 15:05:00 +01:00
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
config NRFX_PWM0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PWM0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_PWM0
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_PWM
ext: hal: nordic: Enable building of NRFX QDEC Allow project to use Nordic's NRFX QDEC driver. This closes issue #9364 Jira:DESK-259 Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
2018-09-24 14:27:52 +02:00
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
config NRFX_PWM1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PWM1 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_PWM1
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_PWM
ext: hal: nordic: Add missing peripherals in Kconfig Peripheral drivers are already available but cannot be enabled trough Kconfig. This allow project to use nrfx drivers. Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
2018-11-06 17:11:25 +01:00
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
config NRFX_PWM2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PWM2 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_PWM2
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_PWM
config NRFX_PWM3
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PWM3 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_PWM3
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_PWM
config NRFX_QDEC
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "QDEC driver"
dts: arm: nordic: add QDEC nodes for nrf5340 Add device tree nodes for QDEC peripheral instances for nRF5340 Application core. Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2021-02-12 16:34:46 +01:00
depends on HAS_HW_NRF_QDEC || HAS_HW_NRF_QDEC0
drivers: adc: Add shims for nrfx ADC and SAADC drivers This commit adds translation layers to make nrfx drivers for the nRF ADC (nRF51 series) and SAADC (nRF52 series) peripherals accessible via the Zephyr's API. The SAADC peripheral is accessed using nrfx HAL only as it turns out that usage of the nrfx driver in this case would be inconvenient and would unnecessarily complicate the shim. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-05-21 15:01:08 +02:00
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
config NRFX_QSPI
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "QSPI driver"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_QSPI
config NRFX_RNG
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "RNG driver"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_RNG
drivers: counter: Counter API implementation for nRF Series (RTC). Shim for counter API using nrfx_rtc driver. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2018-06-28 09:30:04 +02:00
config NRFX_RTC
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "RTC driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_RTC0 || HAS_HW_NRF_RTC1 || HAS_HW_NRF_RTC2
drivers: counter: Counter API implementation for nRF Series (RTC). Shim for counter API using nrfx_rtc driver. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2018-06-28 09:30:04 +02:00
config NRFX_RTC0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "RTC0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_RTC0
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_RTC
drivers: counter: Counter API implementation for nRF Series (RTC). Shim for counter API using nrfx_rtc driver. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2018-06-28 09:30:04 +02:00
config NRFX_RTC1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "RTC1 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_RTC1
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_RTC
drivers: counter: Counter API implementation for nRF Series (RTC). Shim for counter API using nrfx_rtc driver. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2018-06-28 09:30:04 +02:00
config NRFX_RTC2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "RTC2 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_RTC2
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_RTC
config NRFX_SAADC
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SAADC driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SAADC
drivers: counter: Counter API implementation for nRF Series (RTC). Shim for counter API using nrfx_rtc driver. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2018-06-28 09:30:04 +02:00
drivers: spi: Add shim for nrfx SPI driver This adds a translation layer to make the nrfx driver for the legacy (i.e. without EasyDMA) nRF SPI peripheral accessible via the updated Zephyr's API of the SPI driver. Configuration files are already prepared for adding support for SPIM (Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-03-02 15:05:00 +01:00
config NRFX_SPI
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPI driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPI0 || HAS_HW_NRF_SPI1 || HAS_HW_NRF_SPI2
drivers: spi: Add shim for nrfx SPI driver This adds a translation layer to make the nrfx driver for the legacy (i.e. without EasyDMA) nRF SPI peripheral accessible via the updated Zephyr's API of the SPI driver. Configuration files are already prepared for adding support for SPIM (Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-03-02 15:05:00 +01:00
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
config NRFX_SPI0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPI0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPI0
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPI
config NRFX_SPI1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPI1 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPI1
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPI
config NRFX_SPI2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPI2 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPI2
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPI
drivers: spi: Add shim for nrfx SPI driver This adds a translation layer to make the nrfx driver for the legacy (i.e. without EasyDMA) nRF SPI peripheral accessible via the updated Zephyr's API of the SPI driver. Configuration files are already prepared for adding support for SPIM (Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-03-02 15:05:00 +01:00
config NRFX_SPIM
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIM driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIM0 || HAS_HW_NRF_SPIM1 || \
modules: hal_nordic: Update nrfx to version 2.1.0 Update the hal_nordic module revision, to switch to nrfx 2.1.0. Because the list of peripherals for nRF5340 has changed as follows: - SPIM2 has been renamed to SPIM4 - SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added a couple of related corrections needed to be applied in dts and Kconfig files, plus the spi_nrfx_spim driver has been extended with the support for SPIM4. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2020-01-24 16:22:50 +01:00
HAS_HW_NRF_SPIM2 || HAS_HW_NRF_SPIM3 || HAS_HW_NRF_SPIM4
drivers: spi: Add shim for nrfx SPI driver This adds a translation layer to make the nrfx driver for the legacy (i.e. without EasyDMA) nRF SPI peripheral accessible via the updated Zephyr's API of the SPI driver. Configuration files are already prepared for adding support for SPIM (Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-03-02 15:05:00 +01:00
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
config NRFX_SPIM0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIM0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIM0
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPIM
config NRFX_SPIM1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIM1 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIM1
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPIM
config NRFX_SPIM2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIM2 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIM2
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPIM
config NRFX_SPIM3
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIM3 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIM3
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPIM
modules: hal_nordic: Update nrfx to version 2.1.0 Update the hal_nordic module revision, to switch to nrfx 2.1.0. Because the list of peripherals for nRF5340 has changed as follows: - SPIM2 has been renamed to SPIM4 - SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added a couple of related corrections needed to be applied in dts and Kconfig files, plus the spi_nrfx_spim driver has been extended with the support for SPIM4. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2020-01-24 16:22:50 +01:00
config NRFX_SPIM4
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIM4 instance"
modules: hal_nordic: Update nrfx to version 2.1.0 Update the hal_nordic module revision, to switch to nrfx 2.1.0. Because the list of peripherals for nRF5340 has changed as follows: - SPIM2 has been renamed to SPIM4 - SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added a couple of related corrections needed to be applied in dts and Kconfig files, plus the spi_nrfx_spim driver has been extended with the support for SPIM4. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2020-01-24 16:22:50 +01:00
depends on HAS_HW_NRF_SPIM4
select NRFX_SPIM
drivers: spi: Add shim for nrfx SPI driver This adds a translation layer to make the nrfx driver for the legacy (i.e. without EasyDMA) nRF SPI peripheral accessible via the updated Zephyr's API of the SPI driver. Configuration files are already prepared for adding support for SPIM (Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-03-02 15:05:00 +01:00
config NRFX_SPIS
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIS driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIS0 || HAS_HW_NRF_SPIS1 || \
HAS_HW_NRF_SPIS2 || HAS_HW_NRF_SPIS3
drivers: watchdog: Add shim for nrfx WDT driver Changes add a translation layer to make nrfx WDT driver works with Zephyr API. Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
2018-05-14 09:08:54 +02:00
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
config NRFX_SPIS0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIS0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIS0
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPIS
config NRFX_SPIS1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIS1 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIS1
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPIS
config NRFX_SPIS2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIS2 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIS2
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPIS
config NRFX_SPIS3
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SPIS3 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_SPIS3
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_SPIS
ext: hal: nordic: Add kconfig / CMakeLists entries for nrfx_usbd Adds entries for USBD driver (nrfx_usbd) for kconfig / CMake. Updates nrf52840 configuration header to enable USBD. Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
2018-10-11 15:02:06 +02:00
config NRFX_SYSTICK
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "SYSTICK driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on CPU_CORTEX_M_HAS_SYSTICK
ext: hal: nordic: Add kconfig / CMakeLists entries for nrfx_usbd Adds entries for USBD driver (nrfx_usbd) for kconfig / CMake. Updates nrf52840 configuration header to enable USBD. Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
2018-10-11 15:02:06 +02:00
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
config NRFX_TEMP
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TEMP driver"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_TEMP
ext: hal: nrfx: adding timer driver to Kconfig Added configuration option for TIMER driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-09-28 13:01:15 +02:00
config NRFX_TIMER
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TIMER driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TIMER0 || HAS_HW_NRF_TIMER1 || \
HAS_HW_NRF_TIMER2 || HAS_HW_NRF_TIMER3 || \
HAS_HW_NRF_TIMER4
ext: hal: nrfx: adding timer driver to Kconfig Added configuration option for TIMER driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-09-28 13:01:15 +02:00
config NRFX_TIMER0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TIMER0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TIMER0
ext: hal: nrfx: adding timer driver to Kconfig Added configuration option for TIMER driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-09-28 13:01:15 +02:00
select NRFX_TIMER
config NRFX_TIMER1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TIMER1 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TIMER1
ext: hal: nrfx: adding timer driver to Kconfig Added configuration option for TIMER driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-09-28 13:01:15 +02:00
select NRFX_TIMER
config NRFX_TIMER2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TIMER2 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TIMER2
ext: hal: nrfx: adding timer driver to Kconfig Added configuration option for TIMER driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-09-28 13:01:15 +02:00
select NRFX_TIMER
config NRFX_TIMER3
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TIMER3 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TIMER3
ext: hal: nrfx: adding timer driver to Kconfig Added configuration option for TIMER driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-09-28 13:01:15 +02:00
select NRFX_TIMER
config NRFX_TIMER4
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TIMER4 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TIMER4
ext: hal: nrfx: adding timer driver to Kconfig Added configuration option for TIMER driver to Kconfig. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2018-09-28 13:01:15 +02:00
select NRFX_TIMER
drivers: i2c: Add shims for nrfx TWI and TWIM drivers Changes add a translation layer to make nrfx TWI and TWIM drivers work with Zephyr API. Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
2018-05-23 09:26:53 +02:00
config NRFX_TWI
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWI driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TWI0 || HAS_HW_NRF_TWI1
drivers: i2c: Add shims for nrfx TWI and TWIM drivers Changes add a translation layer to make nrfx TWI and TWIM drivers work with Zephyr API. Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
2018-05-23 09:26:53 +02:00
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
config NRFX_TWI0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWI0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TWI0
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_TWI
config NRFX_TWI1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWI1 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TWI1
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_TWI
drivers: i2c: Add shims for nrfx TWI and TWIM drivers Changes add a translation layer to make nrfx TWI and TWIM drivers work with Zephyr API. Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
2018-05-23 09:26:53 +02:00
config NRFX_TWIM
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIM driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TWIM0 || HAS_HW_NRF_TWIM1 || \
HAS_HW_NRF_TWIM2 || HAS_HW_NRF_TWIM3
drivers: i2c: Add shims for nrfx TWI and TWIM drivers Changes add a translation layer to make nrfx TWI and TWIM drivers work with Zephyr API. Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
2018-05-23 09:26:53 +02:00
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
config NRFX_TWIM0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIM0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TWIM0
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_TWIM
config NRFX_TWIM1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIM1 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TWIM1
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_TWIM
config NRFX_TWIM2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIM2 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TWIM2
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_TWIM
config NRFX_TWIM3
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIM3 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_TWIM3
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_TWIM
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
config NRFX_TWIS
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIS driver"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_TWIS0 || HAS_HW_NRF_TWIS1 || \
HAS_HW_NRF_TWIS2 || HAS_HW_NRF_TWIS3
config NRFX_TWIS0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIS0 instance"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_TWIS0
select NRFX_TWIS
config NRFX_TWIS1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIS1 instance"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_TWIS1
select NRFX_TWIS
config NRFX_TWIS2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIS2 instance"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_TWIS2
select NRFX_TWIS
config NRFX_TWIS3
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "TWIS3 instance"
modules: Kconfig: Add missing options enabling nrfx drivers Quite a few nrfx drivers are missing corresponding Kconfig options that would enable their use in Zephyr applications. Add such options, to facilitate the use of nRF peripherals for which there are no Zephyr driver shims or even suitable APIs. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:24:37 +02:00
depends on HAS_HW_NRF_TWIS3
select NRFX_TWIS
ext: hal: nordic: Add missing peripherals in Kconfig Peripheral drivers are already available but cannot be enabled trough Kconfig. This allow project to use nrfx drivers. Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
2018-11-06 17:11:25 +01:00
config NRFX_UART
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "UART driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_UART0
ext: hal: nordic: Add missing peripherals in Kconfig Peripheral drivers are already available but cannot be enabled trough Kconfig. This allow project to use nrfx drivers. Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
2018-11-06 17:11:25 +01:00
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
config NRFX_UART0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "UART0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_UART0
modules: Kconfig: Unify the way of enabling instances in nrfx drivers Use a consistent way of enabling particular instances of peripherals in nrfx drivers through options defined in modules/Kconfig.nordic, to make the usage of nrfx drivers in Zephyr, especially the ones for which there are no Zephyr driver shims (yet), easier. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 08:47:23 +02:00
select NRFX_UART
ext: hal: nordic: Add missing peripherals in Kconfig Peripheral drivers are already available but cannot be enabled trough Kconfig. This allow project to use nrfx drivers. Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
2018-11-06 17:11:25 +01:00
config NRFX_UARTE
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "UARTE driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_UARTE0 || HAS_HW_NRF_UARTE1 || \
HAS_HW_NRF_UARTE2 || HAS_HW_NRF_UARTE3
ext: hal: nordic: Add missing peripherals in Kconfig Peripheral drivers are already available but cannot be enabled trough Kconfig. This allow project to use nrfx drivers. Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
2018-11-06 17:11:25 +01:00
config NRFX_UARTE0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "UARTE0 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_UARTE0
ext: hal: nordic: Add missing peripherals in Kconfig Peripheral drivers are already available but cannot be enabled trough Kconfig. This allow project to use nrfx drivers. Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
2018-11-06 17:11:25 +01:00
select NRFX_UARTE
config NRFX_UARTE1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "UARTE1 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_UARTE1
ext: hal: nordic: Add missing peripherals in Kconfig Peripheral drivers are already available but cannot be enabled trough Kconfig. This allow project to use nrfx drivers. Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
2018-11-06 17:11:25 +01:00
select NRFX_UARTE
ext: nordic: Add missing NRFX_UARTE[2,3] Kconfig options Definitions of these two options were missing, altought the symbols that would be created for them were already referenced from `ext/hal/nordic/nrfx_config_nrf9160.h`. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-02-26 09:08:18 +01:00
config NRFX_UARTE2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "UARTE2 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_UARTE2
ext: nordic: Add missing NRFX_UARTE[2,3] Kconfig options Definitions of these two options were missing, altought the symbols that would be created for them were already referenced from `ext/hal/nordic/nrfx_config_nrf9160.h`. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-02-26 09:08:18 +01:00
select NRFX_UARTE
config NRFX_UARTE3
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "UARTE3 instance"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_UARTE3
ext: nordic: Add missing NRFX_UARTE[2,3] Kconfig options Definitions of these two options were missing, altought the symbols that would be created for them were already referenced from `ext/hal/nordic/nrfx_config_nrf9160.h`. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-02-26 09:08:18 +01:00
select NRFX_UARTE
ext: hal: nordic: Add kconfig / CMakeLists entries for nrfx_usbd Adds entries for USBD driver (nrfx_usbd) for kconfig / CMake. Updates nrf52840 configuration header to enable USBD. Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
2018-10-11 15:02:06 +02:00
config NRFX_USBD
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "USBD driver"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
depends on HAS_HW_NRF_USBD
ext: hal: nordic: Add kconfig / CMakeLists entries for nrfx_usbd Adds entries for USBD driver (nrfx_usbd) for kconfig / CMake. Updates nrf52840 configuration header to enable USBD. Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
2018-10-11 15:02:06 +02:00
select NRFX_SYSTICK
modules: hal_nordic: Update nrfx to version 2.1.0 Update the hal_nordic module revision, to switch to nrfx 2.1.0. Because the list of peripherals for nRF5340 has changed as follows: - SPIM2 has been renamed to SPIM4 - SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added a couple of related corrections needed to be applied in dts and Kconfig files, plus the spi_nrfx_spim driver has been extended with the support for SPIM4. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2020-01-24 16:22:50 +01:00
config NRFX_USBREG
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "USBREG driver"
modules: hal_nordic: Update nrfx to version 2.1.0 Update the hal_nordic module revision, to switch to nrfx 2.1.0. Because the list of peripherals for nRF5340 has changed as follows: - SPIM2 has been renamed to SPIM4 - SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added a couple of related corrections needed to be applied in dts and Kconfig files, plus the spi_nrfx_spim driver has been extended with the support for SPIM4. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2020-01-24 16:22:50 +01:00
depends on HAS_HW_NRF_USBREG
drivers: watchdog: Add shim for nrfx WDT driver Changes add a translation layer to make nrfx WDT driver works with Zephyr API. Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
2018-05-14 09:08:54 +02:00
config NRFX_WDT
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "WDT driver"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_WDT || HAS_HW_NRF_WDT0 || HAS_HW_NRF_WDT1
config NRFX_WDT0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "WDT0 instance"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_WDT || HAS_HW_NRF_WDT0
select NRFX_WDT
config NRFX_WDT1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "WDT1 instance"
modules: hal_nordic: Update nrfx to version 2.0.0 Update the hal_nordic module revision to switch to nrfx 2.0.0. Add Kconfig options that enable to use the newly introduced nrfx drivers in Zephyr. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-10-25 16:14:04 +02:00
depends on HAS_HW_NRF_WDT1
select NRFX_WDT
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
config NRFX_PRS
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "Peripheral Resource Sharing module"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
config NRFX_PRS_BOX_0
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PRS box 0"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
select NRFX_PRS
config NRFX_PRS_BOX_1
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PRS box 1"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
select NRFX_PRS
config NRFX_PRS_BOX_2
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PRS box 2"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
select NRFX_PRS
config NRFX_PRS_BOX_3
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PRS box 3"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
select NRFX_PRS
config NRFX_PRS_BOX_4
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 12:05:12 +01:00
bool "PRS box 4"
modules: Kconfig: Make options enabling nrfx drivers easier to access The options are given prompts, so that they become accessible from application configuration files and visible in menuconfig, and they are complemented with proper dependencies, so that only the relevant ones for the selected SoC are made available. Jira: NCSDK-2744 Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2019-09-03 12:19:14 +02:00
select NRFX_PRS
endmenu
Copy permalink