.. |
accgyro.h
|
Add MPU9150 mag support and mag autodetection. Add AK8975 mag driver.
|
2014-12-21 23:40:48 +00:00 |
accgyro_adxl345.c
|
Add MPU9150 mag support and mag autodetection. Add AK8975 mag driver.
|
2014-12-21 23:40:48 +00:00 |
accgyro_adxl345.h
|
perms: Remove execute bit on source files
|
2014-11-26 10:13:29 -06:00 |
accgyro_bma280.c
|
Add MPU9150 mag support and mag autodetection. Add AK8975 mag driver.
|
2014-12-21 23:40:48 +00:00 |
accgyro_bma280.h
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
accgyro_l3g4200d.c
|
Replaced gyroData with gyroADC as they both contain the same value
|
2015-05-17 07:14:42 +01:00 |
accgyro_l3g4200d.h
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
accgyro_l3gd20.c
|
Replaced gyroData with gyroADC as they both contain the same value
|
2015-05-17 07:14:42 +01:00 |
accgyro_l3gd20.h
|
Cleanup SPI on STM32F3 targets.
|
2015-02-22 21:49:45 +00:00 |
accgyro_lsm303dlhc.c
|
Replaced gyroData with gyroADC as they both contain the same value
|
2015-05-17 07:14:42 +01:00 |
accgyro_lsm303dlhc.h
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
accgyro_mma845x.c
|
Add MPU9150 mag support and mag autodetection. Add AK8975 mag driver.
|
2014-12-21 23:40:48 +00:00 |
accgyro_mma845x.h
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
accgyro_mpu3050.c
|
Replaced gyroData with gyroADC as they both contain the same value
|
2015-05-17 07:14:42 +01:00 |
accgyro_mpu3050.h
|
perms: Remove execute bit on source files
|
2014-11-26 10:13:29 -06:00 |
accgyro_mpu6050.c
|
Merge pull request #869 from SteveAmor/remove_tricopter_yaw_gyro_smoothing
|
2015-05-29 15:39:02 +01:00 |
accgyro_mpu6050.h
|
SPRACING32/NAZE32 - Add support for MPU6050 data ready interrupt.
|
2015-04-11 19:18:11 +01:00 |
accgyro_spi_mpu6000.c
|
Replaced gyroData with gyroADC as they both contain the same value
|
2015-05-17 07:14:42 +01:00 |
accgyro_spi_mpu6000.h
|
Replaced gyroData with gyroADC as they both contain the same value
|
2015-05-17 07:14:42 +01:00 |
accgyro_spi_mpu6500.c
|
Replaced gyroData with gyroADC as they both contain the same value
|
2015-05-17 07:14:42 +01:00 |
accgyro_spi_mpu6500.h
|
NAZE32 - Add hardware revision detection.
|
2014-10-15 20:59:06 +01:00 |
adc.c
|
Cleanup debug code.
|
2015-04-14 13:59:11 +01:00 |
adc.h
|
Only enable VBat ADC when VBat feature is enabled.
|
2015-03-13 22:28:10 +01:00 |
adc_impl.h
|
Move ADC internal interface into new header file
|
2015-02-23 09:17:06 +01:00 |
adc_stm32f10x.c
|
Only enable VBat ADC when VBat feature is enabled.
|
2015-03-13 22:28:10 +01:00 |
adc_stm32f30x.c
|
Only enable VBat ADC when VBat feature is enabled.
|
2015-03-13 22:28:10 +01:00 |
barometer.h
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
barometer_bmp085.c
|
Fix indentation of code that was messed up in
|
2015-05-06 13:13:44 +01:00 |
barometer_bmp085.h
|
perms: Remove execute bit on source files
|
2014-11-26 10:13:29 -06:00 |
barometer_ms5611.c
|
MS5611 - Remove profanity. Replace comment with code. Improve code
|
2014-10-03 14:38:20 +01:00 |
barometer_ms5611.h
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
bus_i2c.h
|
perms: Remove execute bit on source files
|
2014-11-26 10:13:29 -06:00 |
bus_i2c_soft.c
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
bus_i2c_stm32f10x.c
|
Handle possible problem with unintentional I2C interrupt handler triggering
|
2015-02-23 09:17:06 +01:00 |
bus_i2c_stm32f30x.c
|
STM32F3 - Fix failing multi-byte reads on the AK8975.
|
2014-12-26 01:19:41 +00:00 |
bus_spi.c
|
Fix initialisation of SPI2
|
2015-02-28 00:56:28 +13:00 |
bus_spi.h
|
Cleanup SPI on STM32F3 targets.
|
2015-02-22 21:49:45 +00:00 |
compass.h
|
Add MPU9150 mag support and mag autodetection. Add AK8975 mag driver.
|
2014-12-21 23:40:48 +00:00 |
compass_ak8975.c
|
Cleanup MPU9150 & AK8975 support.
|
2014-12-26 01:19:14 +00:00 |
compass_ak8975.h
|
Add MPU9150 mag support and mag autodetection. Add AK8975 mag driver.
|
2014-12-21 23:40:48 +00:00 |
compass_hmc5883l.c
|
SPRacingF3/Naze32 Rev 5 - Add support for MAG data ready EXTI handler.
|
2015-05-07 09:40:35 +01:00 |
compass_hmc5883l.h
|
SPRacingF3/Naze32 Rev 5 - Add support for MAG data ready EXTI handler.
|
2015-05-07 09:40:35 +01:00 |
display_ug2864hsweg01.c
|
DISPLAY - Allow FC to boot normally if OLED display is not connected at
|
2015-04-18 20:13:46 +01:00 |
display_ug2864hsweg01.h
|
DISPLAY - Allow FC to boot normally if OLED display is not connected at
|
2015-04-18 20:13:46 +01:00 |
flash.h
|
Add support for Winbond 64Mbit SPI flash chip
|
2015-03-30 12:04:41 +13:00 |
flash_m25p16.c
|
Add support for Micron N25Q064 64-mbit SPI flash
|
2015-03-30 18:17:56 +13:00 |
flash_m25p16.h
|
Basic read/write/erase flash functionality works from the CLI
|
2015-01-28 17:45:36 +13:00 |
gpio.h
|
Correct rx channel min/max pulse checking so that it is inclusive to
|
2015-04-19 13:22:32 +01:00 |
gpio_stm32f10x.c
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
gpio_stm32f30x.c
|
STM32F3 - Allow EXTI configuration.
|
2015-03-22 20:53:42 +00:00 |
inverter.c
|
Update inverter.c
|
2015-02-11 19:06:34 +00:00 |
inverter.h
|
Modify some macros so they evaluate to single statement
|
2015-02-23 09:17:06 +01:00 |
light_led.c
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
light_led.h
|
Modify some macros so they evaluate to single statement
|
2015-02-23 09:17:06 +01:00 |
light_led_stm32f10x.c
|
CJMCU - Add support for LED2. Swap usage of LED0 and LED1.
|
2015-01-07 23:02:05 +00:00 |
light_led_stm32f30x.c
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
light_ws2811strip.c
|
Fixed some whitespace around operators
|
2014-11-06 17:36:40 +01:00 |
light_ws2811strip.h
|
Improve speed of LED STRIP code.
|
2014-09-20 01:00:13 +01:00 |
light_ws2811strip_stm32f10x.c
|
STM32F3 - Fix LED Strip hardware initialisation.
|
2015-01-12 22:02:10 +00:00 |
light_ws2811strip_stm32f30x.c
|
STM32F3 - Fix LED Strip hardware initialisation.
|
2015-01-12 22:02:10 +00:00 |
nvic.h
|
SPRacingF3/Naze32 Rev 5 - Add support for MAG data ready EXTI handler.
|
2015-05-07 09:40:35 +01:00 |
pwm_mapping.c
|
Removing unnecessary idlePulse parameter from pwmOneshotMotorConfig.
|
2015-05-29 20:36:43 +01:00 |
pwm_mapping.h
|
CC3D - Add sonar.
|
2015-05-22 22:35:41 +01:00 |
pwm_output.c
|
Removing unnecessary idlePulse parameter from pwmOneshotMotorConfig.
|
2015-05-29 20:36:43 +01:00 |
pwm_output.h
|
Instead of trying to latch the desired features...
|
2015-05-21 01:27:45 +02:00 |
pwm_rx.c
|
solution of issue 318
|
2015-01-24 15:08:51 +01:00 |
pwm_rx.h
|
Remove usage of feature() from rx driver code so that driver code does
|
2014-12-06 14:33:43 +00:00 |
sensor.h
|
Add MPU9150 mag support and mag autodetection. Add AK8975 mag driver.
|
2014-12-21 23:40:48 +00:00 |
serial.c
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
serial.h
|
Change port mode MODE_BIDIR into a port option instead
|
2015-03-19 13:42:13 +13:00 |
serial_softserial.c
|
Add first unit test for some code in serial.c. Fix compiler warnings in
|
2015-04-01 14:12:24 +01:00 |
serial_softserial.h
|
Add first unit test for some code in serial.c. Fix compiler warnings in
|
2015-04-01 14:12:24 +01:00 |
serial_uart.c
|
Fix 303 serial inversion and bidir mode
|
2015-03-31 15:01:28 +02:00 |
serial_uart.h
|
Add new serial port options field (inversion, stop bits, etc)
|
2015-03-19 12:56:11 +13:00 |
serial_uart_impl.h
|
Change port mode MODE_BIDIR into a port option instead
|
2015-03-19 13:42:13 +13:00 |
serial_uart_stm32f10x.c
|
Change port mode MODE_BIDIR into a port option instead
|
2015-03-19 13:42:13 +13:00 |
serial_uart_stm32f30x.c
|
Fix 303 serial inversion and bidir mode
|
2015-03-31 15:01:28 +02:00 |
serial_usb_vcp.c
|
Cleanup warnings in serial_usb_vcp.c
|
2015-01-20 21:53:18 +01:00 |
serial_usb_vcp.h
|
Normalize all the line endings
|
2014-09-15 23:40:17 +01:00 |
sonar_hcsr04.c
|
CC3D - Add sonar.
|
2015-05-22 22:35:41 +01:00 |
sonar_hcsr04.h
|
CC3D - Add sonar.
|
2015-05-22 22:35:41 +01:00 |
sound_beeper.c
|
Avoid unused variable warning for targets with no beeper.
|
2014-11-01 09:15:33 +00:00 |
sound_beeper.h
|
Use Naze hardware revision when initialising beeper. Cleanup inverted
|
2014-10-16 00:44:56 +01:00 |
sound_beeper_stm32f10x.c
|
Avoid warning when target does not use beeper.
|
2014-10-24 22:26:10 +01:00 |
sound_beeper_stm32f30x.c
|
Cleanup warnings in sound_beeper_stm32f30x.c when no beeper is
|
2015-01-20 21:58:37 +01:00 |
system.c
|
Fix boot failure on Flip32+ Deluxe Acro.
|
2015-04-16 20:26:20 +01:00 |
system.h
|
Fix boot failure on Flip32+ Deluxe Acro.
|
2015-04-16 20:26:20 +01:00 |
system_stm32f10x.c
|
Added detection of soft reset and swich of bind mode
|
2014-12-17 23:15:32 +00:00 |
system_stm32f30x.c
|
Implement softreset detection for STM32F3xx based targets
|
2014-12-17 23:15:33 +00:00 |
timer.c
|
SPRacingF3 - Swapping RC3/4 for production boards.
|
2015-05-06 21:39:16 +01:00 |
timer.h
|
CC3D - Add sonar.
|
2015-05-22 22:35:41 +01:00 |
timer_impl.h
|
New timer implementation
|
2014-11-07 15:38:26 +01:00 |
timer_stm32f10x.c
|
New timer implementation
|
2014-11-07 15:38:26 +01:00 |
timer_stm32f10x.h
|
New timer implementation
|
2014-11-07 15:38:26 +01:00 |
timer_stm32f30x.c
|
New timer implementation
|
2014-11-07 15:38:26 +01:00 |
timer_stm32f30x.h
|
New timer implementation
|
2014-11-07 15:38:26 +01:00 |