Dominic Clifton
1e357f7966
Moving telemetry documentation to it's own file.
2014-05-21 21:41:29 +01:00
Dominic Clifton
451b132764
Updating configuration examples to include HoTT via softserial.
2014-05-21 21:29:36 +01:00
Dominic Clifton
b8c620a2c7
Latest binaries. Working HoTT telemetry via softserial.
2014-05-21 21:04:49 +01:00
Dominic Clifton
b24472eca2
Fix softserial inverted head/tail usage.
...
This fixes softSerialTotalBytesWaiting() which means that HoTT now works
on SoftSerial.
2014-05-21 21:02:55 +01:00
Dominic Clifton
63a97b2ab5
Latest binaries with improved HoTT support.
2014-05-21 20:08:17 +01:00
Dominic Clifton
eb0beb70a9
Fix softserial loopback support compilation errors.
2014-05-21 20:06:53 +01:00
Dominic Clifton
49d411dcc7
Update HoTT telemetry processing.
...
This should be flyable now, the previous implementation would block
while calculating data and transmitting.
This implementation calculates packets on a 50hz schedule and transmits
data as close to the transmission spec as it can. It's still possible
for other long-running code to interfere with the data transmission. A
solution would perhaps be to use a timer/irq for the transmission
instead.
There is some cleanup to do still but this needs to be in the hands of
testers for early feedback.
2014-05-21 19:33:28 +01:00
Dominic Clifton
f374b01ca7
Update softserial bytes waiting calculation to use the same logic that
...
the uart code uses.
2014-05-21 19:27:51 +01:00
Dominic Clifton
582cf5ad00
Update UART driver so it reports the amount of bytes waiting.
...
Previously it reported '1' if there is one or more.
2014-05-21 19:26:39 +01:00
Dominic Clifton
bcc9b8ca71
Latest binaries with HoTT timing adjustment.
2014-05-21 14:47:24 +01:00
Dominic Clifton
8a05f861f7
Removing old comment now that the implementation exists.
2014-05-21 07:04:18 +01:00
Dominic Clifton
32e0846fc0
Merge remote-tracking branch 'multiwii/master'
2014-05-21 06:38:30 +01:00
Dominic Clifton
ca6681f455
Merge commit 'multiwii/master~2'
2014-05-21 06:36:42 +01:00
Dominic Clifton
56c2539e01
Delete unnecessary code to reduce code size and improve maintainability by moving errorAngle initialisation to the conditional block where it is used.
2014-05-21 05:51:06 +01:00
dongie
b32cc09e12
move code around to fix some gcc error that doesn't occur with real compilers
2014-05-21 09:04:07 +09:00
Dominic Clifton
420ba7d2c9
Fix HoTT telemetry to use a 3ms delay between each transmitted byte.
...
This has fixed HoTT telemety data on my GR-24, previously it was a bit
intermittent.
This commit also marks a test-point, HoTT works on UART2.
Reference:
https://code.google.com/p/hott-for-ardupilot/source/browse/APM/Hott.pde#510
2014-05-20 17:33:39 +01:00
dongie
f9760bd70e
Cleanup EEPROM writing
2014-05-20 21:46:20 +09:00
Dominic Clifton
0b424807df
Merge pull request #13 from treymarc/patch-1
...
STM32F30x - ARCH_FLAGS was never set to cortex-m4
2014-05-20 09:55:29 +01:00
Trey Marc
c245dc1868
Update Makefile
...
ARCH_FLAGS was never set to cortex-m4 , cf line 63
2014-05-20 03:53:51 +02:00
dongie
bd745f10c1
reverting to old build until i2c issues resolved
2014-05-20 09:45:07 +09:00
dongie
b7fce19ac0
Enable software and disable hardware I2C driver.
...
Software one has been tested and works, hardware causes issues with new PWM code.
2014-05-19 13:27:47 +09:00
dongie
3131bd63f1
added fail check in hardware i2c driver. this doesn't solve the fact that it sucks. needs to be rewritten w/o IRQ
2014-05-19 13:23:02 +09:00
Dominic Clifton
2ee359686b
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
stm32_flash_f103.ld
2014-05-16 00:45:21 +01:00
Dominic Clifton
a2522cab51
Update flash writing code so it can handle using more than one flash
...
page for the config. Use correct page size on STM32F303. Generate
compile time warning if config does not fit in reserved area flash.
2014-05-16 00:03:41 +01:00
Dominic Clifton
e010f6fbf1
Update failsafe_max_usec to use the correct range.
2014-05-15 17:48:24 +01:00
Dominic Clifton
c4ad7402ca
STM32F303 - Clear USART overrun flag if it gets set to prevent CPU usage
...
hog when using the debugger - no other real-world impact was observed.
2014-05-15 16:58:56 +01:00
Dominic Clifton
dcffbdba4b
Initial commit of support for Naze32Pro (rev 1).
2014-05-15 15:34:18 +01:00
Dominic Clifton
ed321e3c8d
Improvement: Updated SUMD to support 16 channels.
2014-05-15 14:29:49 +01:00
Dominic Clifton
032202ef8f
BUGFIX - Cleanup failsafe system so it works correctly with Serial RX
...
systems and Parallel PWM/PPM systems.
Added setting for failsafe_max_usec. Renamed failsafe_detect_threshold
to failsafe_min_usec.
Failsafe now detects when a PPM/PWM RX isn't sending ANY data out on
CH1-4. See documentation notes regarding Graupner receivers in
Failsafe.md.
Documented failsafe system.
2014-05-15 14:28:57 +01:00
dongie
825941c064
correcting flash size in linker script, explaining what the last 2k are used for, and correcting F103 part number
2014-05-15 20:11:16 +09:00
Dominic Clifton
d97722be8e
Formatting bitmask creation code for MSP status response.
2014-05-15 02:39:24 +01:00
Dominic Clifton
ff05ce29a9
Adding notes regarding rcOptions.
2014-05-15 02:38:29 +01:00
Dominic Clifton
1d2676b33b
Adding notes regarding the auxState variable.
2014-05-15 02:14:31 +01:00
Dominic Clifton
58604fcfbc
Latest binaries.
2014-05-14 19:24:30 +01:00
Dominic Clifton
21207ca940
Improvement: Add support for upto 18 channels. Allow RSSI to be read
...
from any channel, not just AUX1-4.
See documentation changes in this commit.
2014-05-14 19:23:27 +01:00
Dominic Clifton
126f94b2c1
fix include file order on flight imu unit test
2014-05-13 16:22:55 +01:00
Dominic Clifton
89d2c3152f
Code formatting and style fixes.
2014-05-13 16:02:18 +01:00
Dominic Clifton
4d572800ee
Documentation formatting.
2014-05-13 15:08:33 +01:00
Dominic Clifton
c4dc65f832
Latest binaries for STM32F103 platforms.
2014-05-12 14:15:13 +01:00
Dominic Clifton
4c4c7b311f
STM32F103 - Fix ADC initialisation, somehow the changes got lost when
...
implementing the STM32F303 ADC code. Now this is inline with the
STM32F303 initialisation.
This also deletes some redundant code due to better initialisation
sequence.
2014-05-12 14:13:23 +01:00
Dominic Clifton
22a5e4ceae
Updating documentation.
2014-05-12 13:48:57 +01:00
Dominic Clifton
e7092ee120
Updating readme to point at documentation sources.
2014-05-12 13:32:13 +01:00
Dominic Clifton
8d0f37a624
Latest binaries.
2014-05-12 13:24:31 +01:00
Dominic Clifton
5d460766e9
RXMSP is no longer a serial rx provider since it uses MSP and not it's
...
own dedicated serial port.
Added a feature to enable/disable RX_MSP.
Renamed feature SERIALRX to RX_SERIAL.
Renamed feature PARALLEL_PWM to RX_PARALLEL_PWM
Renamed PPM to RX_PPM.
Update serial configuration checking to better support Serial RX and
telemetry by verifiying serial port features and supported baud rates.
It's now possible to use a low-speed serial rx provider via softserial -
only problem is all the current serial rx providers are 100000/115200
baud. The code changes however open the door for using serial rx and
any capable serial port such as uart3-5 on the STM32F30x
It's also now possible to use GPS at low speeds on software serial
ports.
2014-05-12 13:23:20 +01:00
Dominic Clifton
a947ef8fbb
BUGFIX - Linker script for F10x was not reserving the last 2kb which
...
meant that 1kb of code could be overwritten when saving the config.
Fixed EEPROM write address for F30x so that code is also not overwritten
when saving the config.
2014-05-12 01:36:59 +01:00
Dominic Clifton
c77c93c8b7
Update battery voltage calculation to use a hex value for the 12bit ADC
...
value.
2014-05-12 00:20:15 +01:00
Dominic Clifton
9f39cad2f9
Disable L3GD20 debug output.
2014-05-12 00:17:41 +01:00
Dominic Clifton
4be9d953ac
CHEBUZZF3 - Implement ADC driver for 3 ADC channels. Use STM32F3 linker
...
script so it uses the right values for RAM and FLASH size.
2014-05-12 00:17:14 +01:00
Dominic Clifton
b3ee895f97
Merge branch 'multiwii-master'
...
Conflicts:
src/board.h
src/buzzer.c
src/config.c
src/drivers/serial_common.h
src/drivers/system_common.c
src/drv_gpio.h
src/drv_pwm.c
src/drv_timer.c
src/drv_uart.c
src/flight_imu.c
src/mw.c
src/rx_sbus.c
src/sensors.c
src/serial_cli.c
2014-05-12 00:16:03 +01:00
treymarc
cabc57774c
format code properly
...
match the comment from pullrequest about spacing
remains : some hand alignment for comment and wrong /** */ usage.
Conflicts:
src/board.h
src/buzzer.c
src/config.c
src/drivers/serial_common.h
src/drivers/system_common.c
src/drv_gpio.h
src/drv_pwm.c
src/drv_timer.c
src/drv_uart.c
src/flight_imu.c
src/mw.c
src/serial_cli.c
2014-05-11 18:04:05 +01:00