| .. |
|
96b_carbon_stm32f401xe.conf
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
96b_carbon_stm32f401xe.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
96b_stm32_sensor_mez.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
adafruit_itsybitsy_m4_express.conf
|
test: drivers: spi: spi_loopback: fix adafruit_itsybitsy_m4_express
|
2023-04-21 09:40:53 +02:00 |
|
adafruit_itsybitsy_m4_express.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
adp_xc7k_ae350.overlay
|
tests: drivers: spi: spi_loopback: Add board's overlay
|
2022-09-07 15:34:47 +02:00 |
|
apard32690_max32690_m4.overlay
|
tests: drivers: spi: spi_loopback: Support RTIO tests for APARD32690
|
2024-10-22 20:42:20 +02:00 |
|
arduino_zero.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
arduino_zero.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
arty_a7_designstart_fpga_cortex_m1.conf
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
arty_a7_designstart_fpga_cortex_m1.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
b_u585i_iot02a.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
cc1352r1_launchxl.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
cc1352r1_launchxl.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
cy8cproto_062_4343w.overlay
|
drivers: spi: Initial version of the Infineon CAT1 SPI driver
|
2023-09-12 10:55:01 +02:00 |
|
cy8cproto_063_ble.overlay
|
drivers: spi: Initial version of the Infineon CAT1 SPI driver
|
2023-09-12 10:55:01 +02:00 |
|
ek_ra2a1.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra2a1.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra4e2.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra4e2.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra4m2.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra4m2.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra4m3.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra4m3.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra4w1.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra4w1.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6e2.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6e2.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m1.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m1.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m2.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m2.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m3.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m3.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m4.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m4.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m5.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra6m5.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
ek_ra8d1.conf
|
driver: spi: Add initial support for spi driver on ra8
|
2024-09-04 21:28:19 +02:00 |
|
ek_ra8d1.overlay
|
driver: spi: Add initial support for spi driver on ra8
|
2024-09-04 21:28:19 +02:00 |
|
ek_ra8m1.conf
|
driver: spi: Add initial support for spi driver on ra8
|
2024-09-04 21:28:19 +02:00 |
|
ek_ra8m1.overlay
|
driver: spi: Add initial support for spi driver on ra8
|
2024-09-04 21:28:19 +02:00 |
|
em_starterkit_emsk_em9d.overlay
|
samples: tests: additional overlay and conf file adjustments
|
2024-04-09 23:35:54 +02:00 |
|
emsdp_emsdp_em11d.conf
|
samples: tests: additional overlay and conf file adjustments
|
2024-04-09 23:35:54 +02:00 |
|
emsdp_emsdp_em11d.overlay
|
samples: tests: additional overlay and conf file adjustments
|
2024-04-09 23:35:54 +02:00 |
|
fpb_ra6e1.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
fpb_ra6e1.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
fpb_ra6e2.conf
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
fpb_ra6e2.overlay
|
tests: drivers: spi: Support test spi_loopback for RA6, RA4, RA2
|
2024-11-25 01:02:35 +01:00 |
|
frdm_k64f.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
frdm_ke1xz_flexio_spi.overlay
|
tests: drivers: add flexio pwm and spi support for ke17z
|
2024-08-28 06:50:50 -04:00 |
|
frdm_ke17z.conf
|
tests: drivers: spi: add configuration for ke17z to test loopback
|
2024-08-08 06:07:51 -04:00 |
|
frdm_ke17z.overlay
|
tests: drivers: spi: add configuration for ke17z to test loopback
|
2024-08-08 06:07:51 -04:00 |
|
frdm_ke17z512.conf
|
tests: drivers: spi: add configuration for ke17z to test loopback
|
2024-08-08 06:07:51 -04:00 |
|
frdm_ke17z512.overlay
|
tests: drivers: spi: add configuration for ke17z to test loopback
|
2024-08-08 06:07:51 -04:00 |
|
frdm_kw41z.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
frdm_mcxn236.conf
|
tests: drivers: spi: add spi test support for frdm_mcxn236 board
|
2024-08-15 10:15:12 +01:00 |
|
frdm_mcxn236.overlay
|
tests: drivers: spi: add spi test support for frdm_mcxn236 board
|
2024-08-15 10:15:12 +01:00 |
|
frdm_mcxn947_mcxn947_cpu0.conf
|
tests: spi: Add support for NXP MCXN947
|
2024-03-26 16:39:18 -04:00 |
|
frdm_mcxn947_mcxn947_cpu0.overlay
|
tests: spi: Add support for NXP MCXN947
|
2024-03-26 16:39:18 -04:00 |
|
frdm_mcxn947_mcxn947_cpu0_qspi.conf
|
test: frdm_mcxn947_mcxn947: Add config and overlay for QSPI variant
|
2024-09-06 18:01:43 -04:00 |
|
frdm_mcxn947_mcxn947_cpu0_qspi.overlay
|
test: frdm_mcxn947_mcxn947: Add config and overlay for QSPI variant
|
2024-09-06 18:01:43 -04:00 |
|
frdm_mcxw71.overlay
|
boards: frdm_mcxw71: Enable LPSPI
|
2024-10-21 18:39:49 -05:00 |
|
frdm_rw612.overlay
|
boards: frdm_rw612: Simple enablements collection
|
2024-06-13 16:44:12 -04:00 |
|
gd32f403z_eval.overlay
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
gd32f407v_start.overlay
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
gd32f450i_eval.overlay
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
gd32f450v_start.overlay
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
gd32f450z_eval.overlay
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
gd32f470i_eval.overlay
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
gd32vf103c_starter.conf
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
gd32vf103c_starter.overlay
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
gd32vf103v_eval.overlay
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
imx8mp_evk_mimx8ml8_m7.conf
|
tests: drivers: spi: spi_loopback: Add mimx8mp_evk board
|
2024-04-02 21:03:47 -04:00 |
|
imx8mp_evk_mimx8ml8_m7.overlay
|
tests: drivers: spi: spi_loopback: Add mimx8mp_evk board
|
2024-04-02 21:03:47 -04:00 |
|
imx8mp_evk_mimx8ml8_m7_ddr.conf
|
tests: drivers: spi: spi_loopback: Add mimx8mp_evk board
|
2024-04-02 21:03:47 -04:00 |
|
imx8mp_evk_mimx8ml8_m7_ddr.overlay
|
tests: drivers: spi: spi_loopback: Add mimx8mp_evk board
|
2024-04-02 21:03:47 -04:00 |
|
intel_adl_crb.conf
|
tests: drivers: spi: spi_loopback: Added intel_adl_crb overlay
|
2023-09-05 11:41:46 +02:00 |
|
intel_adl_crb.overlay
|
tests: drivers: spi: spi_loopback: Added intel_adl_crb overlay
|
2023-09-05 11:41:46 +02:00 |
|
intel_rpl_p_crb.conf
|
tests: drivers: spi: spi_loopback: Enabled SPI in RPL-P
|
2023-12-27 16:06:19 +00:00 |
|
intel_rpl_p_crb.overlay
|
tests: drivers: spi: spi_loopback: Enabled SPI in RPL-P
|
2023-12-27 16:06:19 +00:00 |
|
intel_rpl_s_crb.conf
|
boards: x86: Add intel_ prefix to Intel Raptor Lake boards
|
2023-08-11 19:48:32 +00:00 |
|
intel_rpl_s_crb.overlay
|
boards: x86: Add intel_ prefix to Intel Raptor Lake boards
|
2023-08-11 19:48:32 +00:00 |
|
longan_nano.overlay
|
tests: spi: spi_loopback: add interrupt and DMA tests for GD32 boards
|
2023-01-11 08:50:56 -08:00 |
|
longan_nano_gd32vf103_lite.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
lpcxpresso55s16.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
lpcxpresso55s69_lpc55s69_cpu0.conf
|
treewide: fix board identifier in overlays for lpcxpresso55s69
|
2024-03-15 17:12:08 -04:00 |
|
lpcxpresso55s69_lpc55s69_cpu0.overlay
|
treewide: fix board identifier in overlays for lpcxpresso55s69
|
2024-03-15 17:12:08 -04:00 |
|
lpcxpresso54114_lpc54114_m4.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
max32655evkit_max32655_m4.conf
|
tests: drivers: spi: spi_loopback: Add MAX32655 boards
|
2024-08-14 14:45:27 -04:00 |
|
max32655evkit_max32655_m4.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max32655fthr_max32655_m4.conf
|
tests: drivers: spi: spi_loopback: Add MAX32655 boards
|
2024-08-14 14:45:27 -04:00 |
|
max32655fthr_max32655_m4.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max32662evkit.conf
|
tests: drivers: spi: Enable spi driver tests for max32662evkit board
|
2024-08-14 14:45:27 -04:00 |
|
max32662evkit.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max32666fthr_max32666_cpu0.conf
|
tests: drivers: spi: spi_loopback: Add MAX32666FTHR
|
2024-08-14 14:45:27 -04:00 |
|
max32666fthr_max32666_cpu0.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max32670evkit.conf
|
tests: drivers: spi: Add MAX32670EVKIT overlay file
|
2024-08-14 14:45:27 -04:00 |
|
max32670evkit.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max32672evkit.conf
|
tests: drivers: spi: Add MAX32672 boards overlay file
|
2024-08-14 14:45:27 -04:00 |
|
max32672evkit.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max32672fthr.conf
|
tests: drivers: spi: Add MAX32672 boards overlay file
|
2024-08-14 14:45:27 -04:00 |
|
max32672fthr.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max32675evkit.conf
|
tests: drivers: spi: Add MAX32675EVKIT overlay file
|
2024-08-14 14:45:27 -04:00 |
|
max32675evkit.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max32680evkit_max32680_m4.conf
|
tests: drivers: spi: spi_loopback: Add MAX32680EVKIT
|
2024-08-14 14:45:27 -04:00 |
|
max32680evkit_max32680_m4.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max32690evkit_max32690_m4.conf
|
tests: drivers: spi: spi_loopback: Add MAX32690EVKIT
|
2024-06-04 13:39:51 +02:00 |
|
max32690evkit_max32690_m4.overlay
|
tests: drivers: spi: spi_loopback: Enable DMA tests for MAX32 boards
|
2024-09-10 14:39:51 +01:00 |
|
max78002evkit_max78002_m4.conf
|
tests: Add MAX78002EVKIT test overlay files
|
2024-11-16 15:09:57 -05:00 |
|
max78002evkit_max78002_m4.overlay
|
tests: Add MAX78002EVKIT test overlay files
|
2024-11-16 15:09:57 -05:00 |
|
mck_ra8t1.conf
|
driver: spi: Add initial support for spi driver on ra8
|
2024-09-04 21:28:19 +02:00 |
|
mck_ra8t1.overlay
|
driver: spi: Add initial support for spi driver on ra8
|
2024-09-04 21:28:19 +02:00 |
|
mec172xevb_assy6906.overlay
|
drivers: spi: Microchip XEC QMSPI-LDMA fix spi buffer usage
|
2023-04-11 16:57:56 +02:00 |
|
mimx8mm_phyboard_polis_mimx8mm6_m4.conf
|
tests: drivers: spi_loopback: Add phyboard_polis
|
2024-10-07 18:43:35 +02:00 |
|
mimx8mm_phyboard_polis_mimx8mm6_m4.overlay
|
tests: drivers: spi_loopback: Add phyboard_polis
|
2024-10-07 18:43:35 +02:00 |
|
mimxrt595_evk_mimxrt595s_cm33.conf
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
mimxrt595_evk_mimxrt595s_cm33.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
mimxrt685_evk_cm33.conf
|
tests: spi_loopback: Enable ASYNC mode for NXP platforms
|
2023-04-24 13:34:29 +02:00 |
|
mimxrt685_evk_mimxrt685s_cm33.overlay
|
samples: tests: additional overlay and conf file adjustments
|
2024-04-09 23:35:54 +02:00 |
|
mimxrt1010_evk.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1010_evk.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1015_evk.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1015_evk.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1020_evk.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1020_evk.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1024_evk.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1024_evk.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1040_evk.conf
|
boards: arm: mixmrt1040_evk: enable SPI support
|
2023-05-11 10:35:40 -05:00 |
|
mimxrt1040_evk.overlay
|
boards: arm: mixmrt1040_evk: enable SPI support
|
2023-05-11 10:35:40 -05:00 |
|
mimxrt1050_evk.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1050_evk.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1060_evk.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1060_evk.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1064_evk.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1064_evk.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
mimxrt1170_evk_mimxrt1176_cm4_B.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
mimxrt1170_evk_mimxrt1176_cm7_A.conf
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
mimxrt1170_evk_mimxrt1176_cm7_A.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
mimxrt1170_evk_mimxrt1176_cm7_B.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
mr_canhubk3.overlay
|
tests: spi_loopback: enable lpspi + dma testing for mr_canhubk3
|
2023-09-28 09:31:52 +02:00 |
|
npcx4m8f_evb.conf
|
test: spi_loopback: add npcx evbs to the spi_loopback test suite
|
2024-01-11 10:04:21 +01:00 |
|
npcx4m8f_evb.overlay
|
test: spi_loopback: add npcx evbs to the spi_loopback test suite
|
2024-01-11 10:04:21 +01:00 |
|
npcx7m6fb_evb.conf
|
test: spi_loopback: add npcx evbs to the spi_loopback test suite
|
2024-01-11 10:04:21 +01:00 |
|
npcx7m6fb_evb.overlay
|
test: spi_loopback: add npcx evbs to the spi_loopback test suite
|
2024-01-11 10:04:21 +01:00 |
|
npcx9m6f_evb.conf
|
test: spi_loopback: add npcx evbs to the spi_loopback test suite
|
2024-01-11 10:04:21 +01:00 |
|
npcx9m6f_evb.overlay
|
test: spi_loopback: add npcx evbs to the spi_loopback test suite
|
2024-01-11 10:04:21 +01:00 |
|
nrf51dk_nrf51822.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
nrf52dk_nrf52832.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
nrf54h20dk_nrf54h20_common.dtsi
|
tests: drivers: spi: loopback: Add nrf54h20dk cpuppr
|
2024-10-24 09:29:39 +02:00 |
|
nrf54h20dk_nrf54h20_cpuapp.overlay
|
tests: drivers: spi: loopback: Add nrf54h20dk cpuppr
|
2024-10-24 09:29:39 +02:00 |
|
nrf54h20dk_nrf54h20_cpuapp_fast.overlay
|
boards: nordic: do not enable DMA_RAM21 region by default
|
2024-09-30 17:12:07 +01:00 |
|
nrf54h20dk_nrf54h20_cpuppr.conf
|
tests: drivers: spi: loopback: Add nrf54h20dk cpuppr
|
2024-10-24 09:29:39 +02:00 |
|
nrf54h20dk_nrf54h20_cpuppr.overlay
|
tests: drivers: spi: loopback: Add nrf54h20dk cpuppr
|
2024-10-24 09:29:39 +02:00 |
|
nrf54h20dk_nrf54h20_cpurad.overlay
|
tests: drivers: spi: loopback: Add nrf54h20dk cpuppr
|
2024-10-24 09:29:39 +02:00 |
|
nrf54l15dk_nrf54l15_cpuapp.overlay
|
samples: tests: Add support to tests on nrf54l15 DK
|
2024-09-26 03:31:20 -04:00 |
|
nrf9160dk_nrf9160.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
nrf52840dk_nrf52840.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
nucleo_f207zg.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
nucleo_f302r8.conf
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
nucleo_f302r8.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
nucleo_f411re.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
nucleo_f429zi.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
nucleo_f746zg.conf
|
tests: drivers: spi_loopback: modify stm32 configs
|
2024-04-19 16:40:33 +00:00 |
|
nucleo_f746zg.overlay
|
tests: drivers: spi_loopback: modify stm32 configs
|
2024-04-19 16:40:33 +00:00 |
|
nucleo_f767zi.conf
|
tests: drivers: spi_loopback: modify stm32 configs
|
2024-04-19 16:40:33 +00:00 |
|
nucleo_f767zi.overlay
|
tests: drivers: spi_loopback: modify stm32 configs
|
2024-04-19 16:40:33 +00:00 |
|
nucleo_g0b1re.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
nucleo_g431rb.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
nucleo_g474re.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
nucleo_h723zg.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
nucleo_h743zi.conf
|
tests: drivers: spi loopback remove conf for most of the stm32 boards
|
2022-01-14 10:09:00 -06:00 |
|
nucleo_h743zi.overlay
|
tests: drivers: Remove unnessesary include
|
2024-08-30 09:09:10 +02:00 |
|
nucleo_h745zi_q_stm32h745xx_m4.overlay
|
tests: drivers: spi loopback testing on the nucleo_h745zi_q boards
|
2024-08-30 09:09:10 +02:00 |
|
nucleo_h745zi_q_stm32h745xx_m7.conf
|
tests: drivers: spi loopback testing on the nucleo_h745zi_q boards
|
2024-08-30 09:09:10 +02:00 |
|
nucleo_h745zi_q_stm32h745xx_m7.overlay
|
tests: drivers: spi loopback testing on the nucleo_h745zi_q boards
|
2024-08-30 09:09:10 +02:00 |
|
nucleo_h753zi.conf
|
drivers: stm32: SPI: SPI nocache buffers can be in CONFIG_NOCACHE_MEMORY
|
2023-08-24 15:35:50 +02:00 |
|
nucleo_h753zi.overlay
|
tests: drivers: Remove unnessesary include
|
2024-08-30 09:09:10 +02:00 |
|
nucleo_l4r5zi.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
nucleo_l152re.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
nucleo_l476rg.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
nucleo_l552ze_q.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
nucleo_u575zi_q.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
nucleo_wb55rg.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
nucleo_wl55jc.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
numaker_m2l31ki.conf
|
tests: drivers: spi: spi_loopback: support numaker_m2l31ki
|
2024-04-02 14:30:57 +01:00 |
|
numaker_m2l31ki.overlay
|
tests: drivers: spi: spi_loopback: support numaker_m2l31ki
|
2024-04-02 14:30:57 +01:00 |
|
numaker_pfm_m467.conf
|
tests: drivers: spi: spi_loopback: support numaker_pfm_m467
|
2023-08-09 08:24:38 +00:00 |
|
numaker_pfm_m467.overlay
|
tests: drivers: spi: spi_loopback: support numaker_pfm_m467
|
2023-08-09 08:24:38 +00:00 |
|
olimex_esp32_evb_procpu.conf
|
boards: rename and update esp32 related conf and overlay files
|
2024-04-23 15:36:13 +02:00 |
|
olimex_esp32_evb_procpu.overlay
|
boards: rename and update esp32 related conf and overlay files
|
2024-04-23 15:36:13 +02:00 |
|
rd_rw612_bga.overlay
|
tests: spi_loopback: Support rd_rw612_bga
|
2024-03-15 18:07:45 -04:00 |
|
robokit1.conf
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
robokit1.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
rpi_pico.overlay
|
everywhere: reindent .overlay files with tabs
|
2024-06-26 15:59:44 +02:00 |
|
rpi_pico_delete_dma_props.overlay
|
everywhere: reindent .overlay files with tabs
|
2024-06-26 15:59:44 +02:00 |
|
rv32m1_vega_openisa_rv32m1_ri5cy.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
s32z2xxdc2_s32z270_dspi.overlay
|
tests: drivers: spi: enable test spi_loopback
|
2024-10-21 12:39:04 +02:00 |
|
s32z2xxdc2_s32z270_rtu0.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
s32z2xxdc2_s32z270_rtu1.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
sam_e70_xplained_same70q21.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
sam_v71_xult_samv71q21.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
samd21_xpro.conf
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
samd21_xpro.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
same54_xpro.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
samr21_xpro.conf
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
samr21_xpro.overlay
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
stm32f3_disco.conf
|
tests: drivers: spi_loopback on stm32f3_disco
|
2022-12-01 13:12:41 +00:00 |
|
stm32f3_disco.overlay
|
tests: drivers: spi_loopback on stm32f3_disco
|
2022-12-01 13:12:41 +00:00 |
|
stm32h573i_dk.overlay
|
tests: drivers: spi driver testing on the stm32h573i_dk board (dma)
|
2023-04-06 07:51:09 +00:00 |
|
stm32l562e_dk.overlay
|
tests: drivers: use stm32 dma driver binding macro to configure channel
|
2023-01-23 09:15:21 -06:00 |
|
stm32mp157c_dk2.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
tlsr9518adk80d.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
twr_ke18f.overlay
|
tests: spi_loopback: Rework test
|
2022-08-08 10:45:14 +02:00 |
|
ucans32k1sic.overlay
|
tests: drivers: spi: enable tests on ucans32k1sic
|
2023-12-06 20:57:42 -06:00 |
|
xmc45_relax_kit.conf
|
drivers: spi: xmc4xxx: Fix potential runtime error
|
2023-11-16 09:26:50 +01:00 |
|
xmc45_relax_kit.overlay
|
tests: drivers: spi: spi_loopback: Update xmc45_relax_kit to use dma
|
2023-04-25 12:23:26 +02:00 |
|
xmc47_relax_kit.conf
|
tests: drivers: spi_loopback: Adds xmc47_relax_kit overlay/conf
|
2023-05-02 12:34:55 +02:00 |
|
xmc47_relax_kit.overlay
|
tests: drivers: spi_loopback: Adds xmc47_relax_kit overlay/conf
|
2023-05-02 12:34:55 +02:00 |
8d7ae89c23