c5839f834b
All board defconfig files currently set the architecture in addition to the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up defconfig files. CONFIG_<arch> symbols currently being set in configuration files also means that they are configurable (can be changed in menuconfig and in configuration files), even though changing the architecture won't work, since other things get set from -DBOARD=<board>. Many boards also allow changing the architecture symbols independently from the SoC symbols, which doesn't make sense. Get rid of all assignments to CONFIG_<arch> symbols and clean up the relationships between symbols and the configuration interface, like this: 1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and turn the CONFIG_<arch> symbols into invisible (promptless/nonconfigurable) symbols instead. Getting rid of the choice allows the symbols to be 'select'ed (choice symbols don't support 'select'). 2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols. This makes sense since you know the architecture if you know the SoC. Put the select on the SOC_* symbol instead for boards that don't have a SOC_SERIES_*. 3. Remove all assignments to CONFIG_<arch> symbols. The assignments would generate errors now, since the symbols are promptless. The change was done by grepping for assignments to CONFIG_<arch> symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the same defconfig file, and putting a 'select' on it instead. See https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed for a split-up version of this commit, which will make it easier to see how stuff was done. This needs to go in as one commit though. This change is safer than it might seem re. outstanding PRs, because any assignment to CONFIG_<arch> symbols generates an error now, making outdated stuff easy to catch. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
49 lines
1.1 KiB
Plaintext
49 lines
1.1 KiB
Plaintext
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
# Zephyr Kernel Configuration
|
|
CONFIG_SOC_SERIES_STM32F0X=y
|
|
|
|
# Platform Configuration
|
|
CONFIG_SOC_STM32F030X8=y
|
|
|
|
# General Kernel Options
|
|
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
|
|
|
|
# Kernel Options due to Low Memory (8k)
|
|
CONFIG_MAIN_STACK_SIZE=640
|
|
CONFIG_IDLE_STACK_SIZE=200
|
|
CONFIG_ISR_STACK_SIZE=512
|
|
# Prevent Interrupt Vector Table in RAM
|
|
CONFIG_IS_BOOTLOADER=y
|
|
CONFIG_BOOTLOADER_SRAM_SIZE=8
|
|
|
|
# Serial Drivers
|
|
CONFIG_SERIAL=y
|
|
CONFIG_UART_INTERRUPT_DRIVEN=y
|
|
# enable console
|
|
CONFIG_CONSOLE=y
|
|
CONFIG_UART_CONSOLE=y
|
|
|
|
# Pinmux Driver
|
|
CONFIG_PINMUX=y
|
|
|
|
# GPIO Controller
|
|
CONFIG_GPIO=y
|
|
|
|
# Clock configuration
|
|
CONFIG_CLOCK_CONTROL=y
|
|
# SYSCLK selection
|
|
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
|
|
# HSE configuration
|
|
CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
|
|
# however, the board does not have an external oscillator, so just use
|
|
# the 8MHz clock signal coming from integrated STLink
|
|
CONFIG_CLOCK_STM32_HSE_BYPASS=y
|
|
# PLL configuration
|
|
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
|
|
# produce 48MHz clock at PLL output
|
|
CONFIG_CLOCK_STM32_PLL_PREDIV=1
|
|
CONFIG_CLOCK_STM32_PLL_MULTIPLIER=6
|
|
CONFIG_CLOCK_STM32_AHB_PRESCALER=1
|
|
CONFIG_CLOCK_STM32_APB1_PRESCALER=1
|