14c92da96d
While recent browsers seem to transparently try to use https for http://www.st.com/... URLs, they are effectively not working anymore, so use https://www.st.com/... URLs instead. curl http://www.st.com/en/evaluation-tools/nucleo-g070rb.html -m 5 -v * Trying 104.89.117.48:80... * Connected to www.st.com (104.89.117.48) port 80 (#0) > GET /en/evaluation-tools/nucleo-g070rb.html HTTP/1.1 > Host: www.st.com > User-Agent: curl/8.1.2 > Accept: */* > * Operation timed out after 5002 milliseconds with 0 bytes received * Closing connection 0 curl: (28) Operation timed out after 5002 milliseconds with 0 bytes received Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
76 lines
1.9 KiB
ReStructuredText
76 lines
1.9 KiB
ReStructuredText
.. _lis2dh:
|
|
|
|
LIS2DH: Motion Sensor Monitor
|
|
#############################
|
|
|
|
Overview
|
|
********
|
|
|
|
This sample application periodically reads accelerometer data from the
|
|
LIS2DH sensor (or the compatible LS2DH12, LIS3DH, and LSM303DLHC
|
|
sensors), and displays the sensor data on the console.
|
|
|
|
Requirements
|
|
************
|
|
|
|
This sample uses the LIS2DH, ST MEMS system-in-package featuring a 3D
|
|
digital output motion sensor.
|
|
|
|
References
|
|
**********
|
|
|
|
For more information about the LIS2DH motion sensor see
|
|
https://www.st.com/en/mems-and-sensors/lis2dh.html.
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
The LIS2DH2 or compatible sensors are available on a variety of boards
|
|
and shields supported by Zephyr, including:
|
|
|
|
* :ref:`actinius_icarus`
|
|
* :ref:`thingy52_nrf52832`
|
|
* :ref:`stm32f3_disco_board`
|
|
* :ref:`x-nucleo-iks01a2`
|
|
|
|
See the board documentation for detailed instructions on how to flash
|
|
and get access to the console where acceleration data is displayed.
|
|
|
|
Building on actinius_icarus
|
|
===========================
|
|
|
|
:ref:`actinius_icarus` includes an ST LIS2DH12 accelerometer which
|
|
supports the LIS2DH interface.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/sensor/lis2dh
|
|
:board: actinius_icarus
|
|
:goals: build flash
|
|
:compact:
|
|
|
|
Building on nucleo_l476rg with IKS01A2 shield
|
|
=============================================
|
|
|
|
The :ref:`x-nucleo-iks01a2` includes an LSM303AGR accelerometer which
|
|
supports the LIS2DH interface. This shield may also be used on other
|
|
boards with Arduino headers.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/sensor/lis2dh
|
|
:board: nucleo_l476rg
|
|
:goals: build flash
|
|
:shield: x_nucleo_iks01a2
|
|
:compact:
|
|
|
|
Sample Output
|
|
=============
|
|
|
|
.. code-block:: console
|
|
|
|
Polling at 0.5 Hz
|
|
#1 @ 12 ms: x -5.387328 , y 5.578368 , z -5.463744
|
|
#2 @ 2017 ms: x -5.310912 , y 5.654784 , z -5.501952
|
|
#3 @ 4022 ms: x -5.349120 , y 5.692992 , z -5.463744
|
|
|
|
<repeats endlessly every 2 seconds>
|