zephyr/samples/sensor/lis2dh
Benjamin Cabé 14c92da96d doc: stm32: Update all st.com links to use HTTPS
While recent browsers seem to transparently try to use https for
http://www.st.com/... URLs, they are effectively not working anymore, so use
https://www.st.com/... URLs instead.

curl http://www.st.com/en/evaluation-tools/nucleo-g070rb.html -m 5 -v
*   Trying 104.89.117.48:80...
* Connected to www.st.com (104.89.117.48) port 80 (#0)
> GET /en/evaluation-tools/nucleo-g070rb.html HTTP/1.1
> Host: www.st.com
> User-Agent: curl/8.1.2
> Accept: */*
>
* Operation timed out after 5002 milliseconds with 0 bytes received
* Closing connection 0
curl: (28) Operation timed out after 5002 milliseconds with 0 bytes
received

Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
2023-09-26 16:55:08 +02:00
..
src samples, tests, boards: Switch main return type from void to int 2023-04-14 07:49:41 +09:00
CMakeLists.txt cmake: increase minimal required version to 3.20.0 2021-08-20 09:47:34 +02:00
prj.conf sensors: Remove unnecessary Kconfig setting of sensors 2022-07-25 15:18:56 +02:00
README.rst doc: stm32: Update all st.com links to use HTTPS 2023-09-26 16:55:08 +02:00
sample.yaml samples, tests: convert string-based twister lists to YAML lists 2023-05-10 09:52:37 +02:00

.. _lis2dh:

LIS2DH: Motion Sensor Monitor
#############################

Overview
********

This sample application periodically reads accelerometer data from the
LIS2DH sensor (or the compatible LS2DH12, LIS3DH, and LSM303DLHC
sensors), and displays the sensor data on the console.

Requirements
************

This sample uses the LIS2DH, ST MEMS system-in-package featuring a 3D
digital output motion sensor.

References
**********

For more information about the LIS2DH motion sensor see
https://www.st.com/en/mems-and-sensors/lis2dh.html.

Building and Running
********************

The LIS2DH2 or compatible sensors are available on a variety of boards
and shields supported by Zephyr, including:

* :ref:`actinius_icarus`
* :ref:`thingy52_nrf52832`
* :ref:`stm32f3_disco_board`
* :ref:`x-nucleo-iks01a2`

See the board documentation for detailed instructions on how to flash
and get access to the console where acceleration data is displayed.

Building on actinius_icarus
===========================

:ref:`actinius_icarus` includes an ST LIS2DH12 accelerometer which
supports the LIS2DH interface.

.. zephyr-app-commands::
   :zephyr-app: samples/sensor/lis2dh
   :board: actinius_icarus
   :goals: build flash
   :compact:

Building on nucleo_l476rg with IKS01A2 shield
=============================================

The :ref:`x-nucleo-iks01a2` includes an LSM303AGR accelerometer which
supports the LIS2DH interface.  This shield may also be used on other
boards with Arduino headers.

.. zephyr-app-commands::
   :zephyr-app: samples/sensor/lis2dh
   :board: nucleo_l476rg
   :goals: build flash
   :shield: x_nucleo_iks01a2
   :compact:

Sample Output
=============

.. code-block:: console

    Polling at 0.5 Hz
    #1 @ 12 ms: x -5.387328 , y 5.578368 , z -5.463744
    #2 @ 2017 ms: x -5.310912 , y 5.654784 , z -5.501952
    #3 @ 4022 ms: x -5.349120 , y 5.692992 , z -5.463744

   <repeats endlessly every 2 seconds>