STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32 reset controller position argument provided to STM32_RESET()
macro sometime uses an unnecessary U suffix. Remove these useless
suffixes for this series for consistency among STM32 SoCs DTSI files.
No functional change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Remove the useless U suffix used for STM32_RESET() macro bit position
argument in the DTS example snippet to prevent it spreads in DTS/DTSI
files while useless.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Add required sample test variant to enable systematic build of
stm32f7 platform using DMA configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Remove I2C and EEPROM from kv260_r5_defconfig. As they can be enabled by
the application as needed.
Fixes#97323
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Siwx91x memory controller is currently 4 times slower than expected.
Investigations point out the clock is not correct.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
In the original HAL, sl_si91x_psram_init() and sl_si91x_psram_uninit() were
also in charge of configuring the pinctrl and the clocks. A workaround
have been introduced to avoid change in pinctrl but they still changed the
clock configuration.
We definitely need to expose the clock configuration to Zephyr users. The
HAL has been patched to split the sl_si91x_psram_*init() function in
smaller pieces. So it is possible to configure the devic without changing
the clock or the pinctrl. Let's use these new functions.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Added mikrobus_header, mikrobus_i2c and mikrobus_spi node labels to
da1469x_dk_pro device tree board definition, allowing compatible shield
boards to be used.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Restore the auto-phy config for tests which seem particularly sensitive
to timings related to this.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Make sure to consider both the new peripheral and central Kconfig options
when calculating needed TX buffers.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Remove deprecated Kconfig option usage, and replace it with corresponding
options which yield the same behavior as before.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The BT_AUTO_PHY_UPDATE option was problematic in the sense that it didn't
really allow any kind of fine-tuning of what automation is desired. In
particular, it didn't allow specifying which PHY was the preferred one (it
was hardcoded to 2M) and also didn't allow specifying role-specific
(central vs peripheral) preferences.
To solve this, deprecate the old option, and instead introduce
role-specific options that allow specifying 1M/2M/Coded/None as the
preference. The new options have slightly different defaults than the new:
for central role 2M stays as the preference, however since it's uncommon to
require automated changes on the peripheral side the default is set to
None there.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
There's a regression from commit 8cfad44852
which introduced trying to enable advertising twice. Remove the other
attempt.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Enables MCU-Boot default Swap mode (was overwrite only)
for the FRDM-MCXA156, after the flash program size switched
to the 16-bytes (was 128).
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Those are not applied properly as subsequent overlays may (and
actually do!) overwrite some of configurations tuned in here.
Also with latest improvements in userchannel HCI driver low
buffers are handled in similar way as on real boards so no extra
tuning is needed anyway.
This reverts commit b6e7b650a2.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Fix format specifiers for zassert strings for 64-bit platforms and
32-bit platforms that use 64-bit time_t.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
Use %zu format specifier only for size_t type to ensure compatibility with
both 32-bit and 64-bit platforms.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
Use %zu format specifier for size_t type to ensure compatibility with both
32-bit and 64-bit platforms.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
Use %zu format specifier for size_t type to ensure compatibility with both
32-bit and 64-bit platforms.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
Move the RAIL interrupts installer from the Bluetooth HCI driver
to the SoC layer so that it can be used by other subsystems
as well.
Signed-off-by: David Boullie <David.Boullie@silabs.com>
- The UUID is the device unique identifier read from the
OTP and made available in boot report to avoid the repetitive
slow reads from OTP.
Signed-off-by: Aymen LAOUINI <aymen.laouini@nordicsemi.no>
Add RHX100 board target to the nsim_arc_v platform documentation.
Update supported boards list and toolchain checking examples to
include both RMX100 and RHX100 references.
Signed-off-by: Afonso Oliveira <afonsoo@synopsys.com>
Add board configuration for RHX100 RISC-V processor.
Provides device tree files for RHX100 and RHX1xx series,
YAML configuration for nSIM simulator integration,
and board-specific default configuration.
Signed-off-by: Afonso Oliveira <afonsoo@synopsys.com>
Add explicit PMP_GRANULARITY default value of 8 to RMX SoC configuration.
This makes the PMP configuration more explicit and easier to understand.
No functional change as RISCV_PMP was already enabled and PMP_GRANULARITY
already defaulted to this value.
Signed-off-by: Afonso Oliveira <afonsoo@synopsys.com>
Uses shorter names for the RMX SOC configuration.
Changes:
- SOC_SERIES_NSIM_ARC_V_RMX -> SOC_SERIES_RMX
- SOC_NSIM_ARC_V_RMX100 -> SOC_RMX100
Also updates board Kconfig to use the shorter names.
Signed-off-by: Afonso Oliveira <afonsoo@synopsys.com>
Add device tree binding file for the Synopsys ARC-V RMX RISC-V
CPU core. This binding enables proper device tree property parsing by
the Enhanced Device Tree (EDT) system, allowing Kconfig device tree
macros to access CPU properties like clock-frequency.
The binding includes the standard RISC-V CPU properties by extending
riscv,cpus.yaml, which provides access to properties defined in cpu.yaml
such as clock-frequency.
Also removes hardcoded SYS_CLOCK_HW_CYCLES_PER_SEC from board level
and adds DT-derived value to RMX SoC level.
Signed-off-by: Afonso Oliveira <afonsoo@synopsys.com>
Add arcmwdt RISC-V core/ISA mapping in target_riscv.cmake to
automatically derive compiler flags from Kconfig settings.
- Select series core flag from SoC Kconfig: -av5rmx/-av5rhx
- Map RISC-V Kconfig to ccac -Z flags (M/A/C/Zicsr/Zifencei/Zicntr)
- Handle compressed logic correctly: -Zc or individual Zc* sub-extensions
- Add F/D and compressed FPU (-Zf/-Zd, -Zcf/-Zcd)
- Add -Zmmul when M is not selected and ZMMUL is enabled
- Use OPTIONAL include to allow for arch-specific target files
Keep early compiler checks stable by not pushing -Z flags into
CMAKE_REQUIRED_FLAGS.
Co-authored-by: Torsten Tejlmand Rasmussen <torsten.rasmussen@nordicsemi.no>
Signed-off-by: Afonso Oliveira <afonsoo@synopsys.com>
Signed-off-by: Afonso Oliveira <afonso.oliveira707@gmail.com>
Signed-off-by: Torsten Tejlmand Rasmussen <torsten.rasmussen@nordicsemi.no>
Without this check, `spi_context_unlock_unconditionally()` is capable
to release the SPI bus semaphore (ctx->lock) which might be taken by
another SPI slave device in the meantime.
Actually, this race condition happens when `spi_release()` is called
when the SPI slave device in question (spi_cfg) has already released
its chip select and also the SPI bus lock semaphore.
So, any not required call of `spi_release()` may result in a SPI
communication issue where the SPI bus lock, held by another SPI
slave device, is prematurely released.
The observable result is the simultaneous engagement of two SPI
chip selects after such an SPI release call.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
bt_conn_get_info API is used to retrieve connection-related
information. However, bt_conn_get_info sends the HCI command
BT_HCI_OP_READ_ENCRYPTION_KEY_SIZE to retrieve current
key_size, causing excessive blocking time.
Signed-off-by: Xiang Liu <liuxiang18@xiaomi.com>
