The initial goal of CONFIG_CSPRNG_AVAILABLE was to declare that there was
an entropy node declared in the DT so that if CONFIG_ENTROPY_GENERATOR
was enabled, then the corresponding driver could be enabled.
This works in most of the cases, but not all. A counter example is the
"entropy_bt_hci" driver which is only enabled if CONFIG_BT_HCI_HOST is also
enabled. This means that in a build where the BT stack is not enabled
that driver won't be enabled even if the DT node is still present.
An example of this are the nrf5340[dk|bsim] boards.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Fix start/stop driver API implementation. OT stack expects these
functions to only put IEEE802.15.4 in sleep mode and back in RX
mode when calling start. Fixes ifconfig down/up cycling as well
as nodes staying in leader role and not forming a network.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
No need to use Posix eventfd API in core network code as zvfs_eventfd
is compatible with it and we can now avoid using Posix headers
unnecessarily.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This requirements file can be confusing and will only get stale over
time. Drop it since these dependencies are actually captured in
scripts/requirements-run-test.txt
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
There is a race condition in this method of CS behavior verification,
where multiple CS signal transitions can happen during one interrupt
processing, thereby only getting one callback and marking the trigger
count as being less than what is accurate. At least we can account for
most real situations where this happens by also looking at the CS pin
logic level and comparing to how it started, to potentially realize that
there was another edge that happened when it either should or shouldn't
have happened.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Use zu% format for size_t type.
Use d% format for int type.
Use u% format for uint32_t type.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Jony Zhang <jony.zhang@nxp.com>
Depending on the ring buffer configuration, users may encounter
the "size too big" assertion in runtime. Let's enable the
RING_BUFFER_LARGE when we know that it is required.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Make the runtime assertion message more obvious on why it's
failing.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The UART device used by the backend needs to be gotten before use,
and put after. In limited cases, device drivers call
pm_device_runtime_get() as part of the call to uart_rx_enable(),
this is not the case for polling, nor interrupt driven API calls
for most if not all drivers, nor is that expected.
Implement pm_device_runtime calls in shell uart backend similar to
the logging uart backend to support all uart drivers in all
configurations.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Update hal_adi revision to get HAL fix commits. One of the fix commits
addresses an issue where the MAX32650 system clock frequency value was
not set correctly, which could lead to improper operation of
time-dependent functions.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Removes checks for HWMv1 as the code for HWMv1 was removed from
Zephyr some time ago and these checks are not needed
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
HWMv2 was introduced in v3.7, and HWMv1 support was removed in v4.2
so this script is no longer needed
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
As midi2 is provided by networking subsystem it should not
depend on any features provided by Posix. Convert Posix poll
API calls to zsock poll ones. There is no functionality changes,
only naming changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix how Doxygen special commands \retval & \return are used in doc text.
\retval: Starts a description for a function's return value with name
<return value>, which needs to be attached and to not be a word that is
part of the sentence, and each return val should have its own \retval.
Otherwise \retval is replaced with \return.
Signed-off-by: Abderrahmane JARMOUNI <git@jarmouni.me>
Fix how Doxygen special commands \retval & \return are used in doc text.
\retval: Starts a description for a function's return value with name
<return value>, which needs to be attached and to not be a word that is
part of the sentence, and each return val should have its own \retval.
Otherwise \retval is replaced with \return.
Signed-off-by: Abderrahmane JARMOUNI <git@jarmouni.me>
Fix how Doxygen special commands \retval & \return are used in doc text.
\retval: Starts a description for a function's return value with name
<return value>, which needs to be attached and to not a word that is
part of the sentence, and each return val should have its own \retval.
Otherwise \retval is replaced with \return.
Signed-off-by: Abderrahmane JARMOUNI <git@jarmouni.me>
Fix how Doxygen special commands \retval & \return are used in doc text.
\retval: Starts a description for a function's return value with name
<return value>, which needs to be attached and to not a word that is
part of the sentence, and each return val should have its own \retval.
Otherwise \retval is replaced with \return.
Signed-off-by: Abderrahmane JARMOUNI <git@jarmouni.me>
Fix how Doxygen special commands \retval & \return are used in doc text.
\retval: Starts a description for a function's return value with name
<return value>, which needs to be attached and to not be a word that is
part of the sentence, and each return val should have its own \retval.
Otherwise \retval is replaced with \return.
Signed-off-by: Abderrahmane JARMOUNI <git@jarmouni.me>
Fix how Doxygen special commands \retval & \return are used in doc text.
\retval: Starts a description for a function's return value with name
<return value>, which needs to be attached and to not be a word that is
part of the sentence, and each return val should have its own \retval.
Otherwise \retval is replaced with \return.
Signed-off-by: Abderrahmane JARMOUNI <git@jarmouni.me>
Fix how Doxygen special commands \retval & \return are used in doc text.
\retval: Starts a description for a function's return value with name
<return value>, which needs to be attached and to not be a word that is
part of the sentence, and each return val should have its own \retval.
Otherwise \retval is replaced with \return.
Signed-off-by: Abderrahmane JARMOUNI <git@jarmouni.me>
DISK_DRIVER_SDMMC is already by default y,
if it is enabled in the dt, so we shouldn't overwrite
that.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
MDIO will be enabled by default by the ethernet phy, when
needed, we don't need to enable it explicitly in the defconfig files.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Add v4.3.0 to the list of supported releases.
Since v4.1.0 is becoming EOL, bump TOC ranges to no longer list v4.1.0
and add (draft) v4.4.0.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The files in the LICENSES directory are for the reuse tool, and not the
licenses of the Zephyr repository itself.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Generated objects.inv would not contain e.g. "zephyr:board" entry on
incremental builds, making it impossible to use Intersphinx on other
projects when rebuilding the Zephyr docset.
It can be verified by inspecting inventory like this:
```python
from sphinx.util.inventory import InventoryFile
InventoryFile.loads(open("objects.inv", "rb").read(), uri="")
inv.data.keys()
```
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
i.MX95 M7 supports multi-level interrupt.
Current ram_context_for_isr test does not cover multi-level interrupt.
So exclude i.MX95 M7.
Signed-off-by: Qiang Zhao <qiang.zhao@nxp.com>
- **Fix session mutex handling:** Ensure the `mtls_sessions_lock` is
always released in `mtls_get_unused_session_index` on failure
to prevent deadlocks.
- **Protect `in_use` flag:** Added mutex protection when setting
`in_use = false` in free functions.
- **Cleanup on setup failure:** Added calls to `mbedtls_*_free()`
in `mtls_session_setup()` when key initialization fails.
- **Free logic fix:** Corrected `if/else` structure in
`mtls_session_free()` to ensure the correct context is freed.
Signed-off-by: Badr Bacem KAABIA <badrbacemkaabia@gmail.com>
Remove erroneous calculation of `apkt->pkt->out_len` in
`mtls_ccm_decrypt_auth` and `mtls_gcm_decrypt_auth`.
The output length should be handled by the caller or the
AEAD decryption process itself.
Signed-off-by: Badr Bacem KAABIA <badrbacemkaabia@gmail.com>
