The z_vrfy_uart_configure function was incorrectly checking for the
existence of the 'config_get' handler instead of 'configure'.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a parameter to MQTT TLS configuration that allows to force native
TLS on a socket if offload dispatcher is used. This allows for MQTT to
use native TLS implementation with an offloaded TCP socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds a warning to `bt_l2cap_chan_send` that the user must not pass
buffers to this function whose pool has implemented a destroy callback
(net_buf_pool::destroy) that uses synchronization primitives. This is
due to the HCI driver interface not having defined rules for where a
buffer may be freed, leading to the possibility of the callback
being called from the ISR. This warning can be removed at a later point
if the HCI driver interface is redesigned to not pass the net_bufs
directly.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
The pio_rpi_pico_get_pio function was defined as 'inline' in the
header file. This caused 'undefined reference' linker errors when
building with CONFIG_NO_OPTIMIZATIONS=y (-O0), as the compiler
doesn't inline the function and no external symbol is provided.
This patch changes the definition to 'static inline' to ensure a
local copy is generated in each translation unit when not inlined,
consistent with other helper functions in Zephyr and the Linux kernel.
Fixes#101155
Signed-off-by: Vincent Liao <vincent932693@gmail.com>
Add implementations for the following SBC codec parameter getter functions:
bt_a2dp_sbc_get_channel_mode(): returns the channel mode (mono, dual,
stereo, joint stereo); bt_a2dp_sbc_get_subband_num(): returns the number of
subbands (4 or 8); bt_a2dp_sbc_get_block_length(): returns the block length
(4, 8, 12, or 16); bt_a2dp_sbc_get_allocation_method(): returns the
allocation method (SNR or loudness).
These functions parse the SBC codec configuration parameters and return
the corresponding values, completing the API defined in a2dp_codec_sbc.h.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
add initial version of devicetree for amebad SOC.
amebad devicetree file is main platform dtsi file, which should
be included from board dts (e.g rtl872xd_evb.dts)
Signed-off-by: zjian zhang <zjian_zhang@realsil.com.cn>
The documentation is generally using 'inst' consistently to refer to
instance numbers, but a few helper macros have gone their own way.
Clean this up to restore consistency.
This addresses changes introduced somewhere around the following
commits:
- 4c8ed7dd9a ("devicetree.h: Rework
DT_ANY_INST_HAS_PROP_STATUS_OKAY")
- ca6645d508 ("devicetree: shorten DT_ANY_INST_HAS_*_STATUS_OKAY")
- 75ab4d5507 ("devicetree: add DT_ALL_INST_HAS_PROP_STATUS_OKAY()
macro")
- 35a8e37ac2 ("devicetree: add DT_ALL_INST_HAS_BOOL_STATUS_OKAY()
macro")
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
The `renesas,ra-adc` compatible was replaced by `renesas,ra-adc12`,
at #95710 but one ADC devicetree node was not updated accordingly.
This commit updates the missing node to use the correct
`renesas,ra-adc12` compatible.
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
To use the shell one does not need anymore to pull unistd.h,
if one uses sys_getopt, we need to include sys/sys_getopt.h
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To use the shell one does not need anymore to pull unistd.h,
if one uses sys_getopt, we need to include sys/sys_getopt.h
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
None of these headers are needed by this file for anything.
Let's just remove them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The test fails on 64bit targets running out of heap.
Let's just increase it.
Circumstantially it started failing after
d5982f0f89
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
According to the reference manual, 'When the BYPSHAD control bit is set
in the RTC_CR register [...] the value of one of the registers may be
incorrect if an RTCCLK edge occurs during the read operation'. We need
to read te subseconds register until two successive reads are equal.
Signed-off-by: Adrien Lessard <adrien.lessard.42@gmail.com>
According to the reference manual, 'When the BYPSHAD control bit is set
in the RTC_CR register [...] the value of one of the registers may be
incorrect if an RTCCLK edge occurs during the read operation'. We need
to read te subseconds register until two successive reads are equal.
Signed-off-by: Adrien Lessard <adrien.lessard.42@gmail.com>
Add USB host support for rw612_bga board:
- Update board YAML to include usb_host
- Add zephyr_uhc0 node in device tree with status "okay"
Signed-off-by: Aiden Hu <weiwei.hu@nxp.com>
Add the clock emablement in the LPUART driver to avoid
depending on the default enablement settings.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
The PSA Crypto implementation in Mbed TLS requires some heap
to operate.
Provide a small malloc arena to ensure this test remains
compatible with MINIMAL_LIBC configurations
where the arena is disabled by default.
Signed-off-by: Mohamed Moawad <moawad@synopsys.com>
Update system clock related variables
otherwise Cy_SysLib_Delay or Cy_SysLib_DelayUs are incorrect
Signed-off-by: Kevin Chan <kevin.chan3@infineon.com>
Example DTS config comment is meant to help users of the
driver, with the PSRAM device tree configuration.
Signed-off-by: Nikhil Namjoshi <nikhilnamjoshi@google.com>
Tested:
Verified that reading and writing data to the PSRAM
with MCU's FlexSPI controller in Quad Mode, works as
expected.
Signed-off-by: Nikhil Namjoshi <nikhilnamjoshi@google.com>
It's not possible to add comments to a json file, so there's no option to
add license or copyright text.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add mcxw23_evk and frdm_mcxw23 platforms to the power management
test suite to validate power management functionality on MCXW23
hardware.
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
Enabled modes:
idle: SLEEP
suspend: DEEP-SLEEP
standby: POWER-DOWN with CPU retention
OS Time Base: OSTIMER with 32K clock source
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
Clarify the different requirements for QEMU emulation versus real
hardware deployment in the versalnet_rpu board documentation.
For QEMU target:
- XSDB (Xilinx System Debugger) is not used
- PDI (Programmable Device Image) is not required
- QEMU provides direct emulation without hardware initialization files
For real hardware target:
- XSDB and PDI file are required
- PDI contains the hardware initialization and boot configuration
needed for the physical device
This documentation update helps users understand why PDI is optional
for QEMU testing but mandatory for physical board deployment.
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
This reverts commit d11474ce64.
Follows the reversal of 1f69b91e90, as
this commit reflects changes made in there.
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
This reverts commit 1f69b91e90.
Chose to revert it because its changes constitute a deviation from
the dmic API, resulting in failing tests on affected platforms
(mimxrt685s and mimxrt595s mainly).
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
On non-Windows systems execute a new program, replacing the west packages
call, when trying to install packages using pip.
For Windows, update the documented way of installing python packages,
or using 'west packages pip --install' print a warning.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Update hal_stm32 revision to support ble and link layer
libraries selection thanks to KConfig
BT_STM32WBA_LIB_CONFIG
Signed-off-by: Vincent Tardy <vincent.tardy@st.com>
Add new KConfig BT_STM32WBA_LIB_CONFIG specifying the configuration
of the stm32wba ble library (full or basic) depending to bluetooth
features.
Signed-off-by: Vincent Tardy <vincent.tardy@st.com>
Select BT_CTLR_PHY_CODED_SUPPORT for ESP32 variants that support
Bluetooth 5.0 coded PHY (long range). The original ESP32 series
is excluded as it only supports Bluetooth 4.2.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
