Add DMA nodes for MCXW7X SOC DTS.
This SOC used TRIGMUX instead of DMAMUX.
Enable EDMAv3 for the frdm_mcxw71 and frdm_mcxw72
platforms.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Co-authored-by: Declan Snyder <declan.snyder@nxp.com>
Support EDMAv3 platform that do not have dmamux or always on capability.
Therefore, memory to memory transfer is limited in this environment.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Co-authored-by: Emilio Benavente <emilio.benavente@nxp.com>
create internal bt_a2dp_init_req and bt_a2dp_init_ctrl_req to init `req`,
then the `req->status` will not be forgotten to be cleared as 0.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Define the STM32_CK48_ENABLED especially for the stm32F4 series
when ck48 node is enabled to leverage its already implemented support.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add Watchdog support for board Renesas RZ/A3UL, N2L, T2M
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Add Watchdog driver support for Renesas RZ/A3UL, N2L, T2M
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Due to the flag `BT_HFP_HF_FLAG_CLCC_PENDING` is set when receiving
the +CIEV or +CIND notification, the command `AT+CLCC` will be
pending due to the flag is not cleared.
Add a flag `BT_HFP_HF_FLAG_INITIATING` to indicate the HF
initialization is ongoing.
Add a flag `BT_HFP_HF_FLAG_QUERY_CALLS` to indicate the current calls
list needs to be queried.
Set the flag `BT_HFP_HF_FLAG_INITIATING` at the beginning of the HF
initialization. Set the flag `BT_HFP_HF_FLAG_QUERY_CALLS` instead of
setting the flag `BT_HFP_HF_FLAG_CLCC_PENDING` if the current calls
list needs to be queried and the flag `BT_HFP_HF_FLAG_INITIATING` is
set.
After the HF initialization is done, query list of the current calls
by calling the function `hf_query_current_calls()` if the flag
`BT_HFP_HF_FLAG_QUERY_CALLS` is set.
Set the flag `BT_HFP_HF_FLAG_CLCC_PENDING` if it is not set in the
function `hf_query_current_calls()`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
There is no need to disable systimer in application level
as the restart procedure automatically handles it.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit adds the following functionality support:
1. More baudrate setting.
2. 7 bit data moded.
3. Tx (CR_SOUT) and Rx (CR_SIN) signal invert.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Add test case that validates behavior of pm_policy_state_all_lock_get
and pm_policy_state_all_lock_put.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add function for getting and putting a lock for all power states.
It is much faster version of requesting 0 us latency with actual
intention to disable all power states.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Optimise the PPP frame wrapping process by performing all work inside a
single function into a contiguous buffer, instead of operating on the
ring buffer one byte at a time.
On a nRF54L15 (M33 @ 128 MHz) before the change:
```
Wrapping 1062 byte packet: ~4.1 ms
Wrapping 1355 byte packet: ~5.0 ms
```
After the change:
```
Wrapping 1026 byte packet: ~2.4 ms
Wrapping 1341 byte packet: ~3.1 ms
```
Signed-off-by: Jordan Yates <jordan@embeint.com>
DMA syscalls as they were implemented were unsafe. Accepting a void* was
never acceptable as many things could not be verified about it.
Accepting a channel identifier meant that a user mode thread could
start/stop any DMA channel which in theory could be owned by any other
driver. This shouldn't be possible.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Fix additional space in active receive states.
Add additional information when logging duplicate
broadcasts.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When cap_commander_broadcast_reception_start is called during the
handover, the failed_conn was not correctly.
It is now being set by cap_commander_broadcast_reception_start
and if that is called via handover, it will be correctly set.
If it is called via bt_cap_commander_broadcast_reception_start
then it will be cleared in case of error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a miniscule delay to ensure the MAX32 SPI config is applied and active
before returning and initiating any transactions.
Signed-off-by: Pete Johanson <pete.johanson@analog.com>
Add PyOCD runner support to enable flashing and programming
the pic32cm_jh01_cpro board using the PyOCD tool.
Signed-off-by: Arunprasath P <arunprasath.p@microchip.com>
Correct mipi_dsi_stm32_host_init() and mipi_dsi_stm32_attach()
to return a valid errno instead of mixing HAL return values and
errno return values.
Clarify HAL return value is of type HAL_StatusTypeDef and not an
int in mipi_dsi_stm32_transfer().
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Correct stm32_ltdc_set_pixel_format() to return a valid errno instead
of mixing HAL return values and errno return values.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Not needed on Cortex-A as all code and data is in DDR
memory and there is no quickaccess section in the Cortex-A
linker script.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add back test failure that was missed when fixing double
and redundant advertising start in
commit 7a672c05b3 ("Bluetooth: tests: bsim: Fix double
advertising in test_connect2").
Also, relates to commit 8cfad44852 ("Bluetooth: Deprecate
adv auto-resume").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Commit 76740ae added a special case to the STM32 QSPI driver to support
Microchip QSPI flash ICs, such as the SST26VF series,
which use the PP_1_1_4 opcode in PP_1_4_4 mode.
This commit adds the same special case to the STM32 OSPI and XSPI drivers.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
Commits 72370b2 and ff34d57 added the requires-ulbpr
(Unlock Block Protection Register) property to the devicetree binding
for devices controlled by the STM32 QSPI peripheral, and support for
this property to the STM32 QSPI driver.
Some QSPI flash ICs (e.g. Microchip SST26VF series) require this
command to be sent before writing/erasing is possible.
This commit adds the same support to the STM32 OSPI and XSPI drivers.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
This patch adds the necessary switch option to the slip configuration
callback to enable the dynamic configuration of the MAC address of this
interface.
Signed-off-by: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Updating border router configuration to increase sistem stability and
enable additional features required by Thread certification suite
-common:
Increased some thread stacks and enabled stack sentinel
Stack sentinel will be disabled once the sample will not be marked as
EXPERIMENTAL
Enabled link metrics, mac filtering, MLD reports
-nxp-wifi-rcp:
Increased number of multicast ipv6 address for conformance testing
Increased number of DNS SERVERS
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
In STM32 ADC binding, rename the possible values of the sequencer and
oversampler properties to use lowercase string, similar to the internal
regulator.
Adapts the driver and the dtsi with the new values.
Fixes a macro issue in the driver. Since the value from the dtsi didn't
start with internal_regulator_, the reconstruction of the defines by
the macro ANY_ADC_INTERNAL_REGULATOR_TYPE_IS was missing this prefix and
the comparison failed. Add a new argument to the IS_EQ_STRING_PROP to be
able to insert such a prefix.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add ARC-specific variant of kernel.common.stack_protection test that
omits frame pointers to work around GNU toolchain code generation issue.
The GNU toolchain generates FP-relative memory accesses (st r0,[fp,-8])
for local variables when frame pointers are enabled, which bypasses ARC
hardware stack checking that only monitors SP-based instructions. This
causes the test to fail with MPU violations instead of
stack check violations.
Signed-off-by: Mohamed Moawad <moawad@synopsys.com>
There are some cases when OpenThread opens a sockets and doesn't choose
as default it's internal interface, this leading to usage of
platform UDP module which will then send back the packet to the
OpenThread interface. In this case, the packet should not be treated as
originated from backbone interface.
Backbone router multicast listener callback functionality is improved.
A route with a prefix length of 128 is set
and a multicast address is added for each listener registration.
OpenThread interface joins that multicast address group.
Enabled forwarding capabilities for Backbone interface.
A border router should be able to perform default packet forwarding for
destination addresses with a multicast scope greater than admin-local.
In order to achieve this, multicast routes have been added to those
addreses. [https://datatracker.ietf.org/doc/rfc7346/]
For Border Router application, `ip6_addr_cb` is not installed.
otIp6SubscribeMulticastAddress call would re-register an IPV6 multicast
address which might have been registered by an OpenThread node using
`ipmadd add` command and even if that node performed `ipmaddr del`,
the address was still present in multicast listener table. This also
led to a missing MLDv2 message with that specific multicast IPV6
address.
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
