Adds one RX thread per instance. Previously, only one global RX thread was
used resulting in crashes due to the thread instance being overwritten by
other instances.
Signed-off-by: Nils Ruf <nils.ruf@endress.com>
In order to enable the use case where the underlying flash tool supports
bulk-flashing using multiple device IDs, augment the core runner class
with this new runner capability and implement it in the nrfutil runner,
since the nrfutil tool supports it natively.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The errno for format 2 of the getstatus ccc always returns an error.
The check for the invalid defining byte should use the "AND" operation
instead of "OR." Additionally, the first byte of the ibi tir sending
request is ignored due to the incorrect argument count.
This commit fixes both issues.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
There is an incorrect dynamic address setting for setaasa. The correct
behavior is that the dynamic address should be assigned as a static
address only when the CCC request returns success. This commit fixes the
issue.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
There is a deadlock issue when calling stop using address conflict
detection. This is due to the fact that some net_mgmt events are fired
and trigger the dhcpv4_acd_event_handler() with lock held even if they
are of no interest for this callback.
Therefore, before acquiring the lock, make sure the event we received
is one we are expecting.
Also, do the same for dhcpv4_iface_event_handler().
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
Instead of using CONFIG_LOG_DEFAULT_LEVEL, use explicitly charger log
level CONFIG_CHARGER_LOG_LEVEL for all hardware charger supported.
Signed-off-by: Kiara Navarro <knavarro@paltatech.com>
Updates the ipi_optimize test to use 4 CPUs for qemu_x86_64.
This provides enough CPUs for the test to verify the recently
added directed IPI support for x86_64.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adds support for directed IPIs to x86/intel64. Use of direct IPIs
can further reduce the number of schedule IPIs sent and processed
in a system. Fewer IPI related ISRs mean that ...
1. Application code is interrupted less frequently
2. Lower likelihood of scheduler spinlock contention
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
sca finds the code to be logically dead considering the size of long
to be 4 bytes.
- Solution: use uint64_t type for the variable `value`.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
The tmp1075 driver already registers a log module using
LOG_MODULE_REGISTER(TMP1075, CONFIG_SENSOR_LOG_LEVEL).
This ensures that all log messages are prefixed with "TMP1075".
The existing LOG_ERR message redundantly includes "tmp1075",
which is unnecessary.
Signed-off-by: Hank Wang <wanghanchi2000@gmail.com>
k_sleep() returns a 32 bit count of milliseconds, as that was its
historical API. But it now accepts a potentially 64 bit tick count as
an argument, leading to situations where an early wakeup will produce
sleep times that aren't representable. Clamp this instead of
truncating to an arbitrary value.
Naive code will likely do the right thing with the large return (just
sleeping an extra round), and sophisticated apps can detect INT_MAX to
enable more elaborate retry logic.
(Also fixes a somewhat unfortunate puncutation error in the docs that
implied that it returns zero on early wakeup!)
Fixes: #84669
Signed-off-by: Andy Ross <andyross@google.com>
The logging thread is usually woken up by a timer, if the timer
period is longer than 10ms, log_flush() can iterate multiple times
needlessly, while waiting for the next timer. Instead wake up the
logging thread to let it flush the queue immediately. Besides a
hard-coded polling period of 10ms is too long for some applications,
make it a Kconfig parameter.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add tests verifying the functionality of the newly added
accept-encoding based compression support.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Add compression support using the accept-encoding
header to the http server static filesystem resource.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
remove the power off BLE controller function since the hci_reset cmd
is enough, also for wifi-ble coex scenario, need to maintain BLE controller
for some info in SMU region
Signed-off-by: Ying Zhang <ying.zhang_2@nxp.com>
The response should not be handled if there is not a request has been
sent.
Ignore the response if the `session->param` is `NULL`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
In current implementation, if the UUID of request is unknown, the
local variable `u` will not be updated, and the unknown UUID `u`
is used as the target to search it in the SDP record list. It may
result in irrelevant record being replied to the requester.
Ignore the unsupported UUID to fix the issue.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
http_server_http2.c does not guard check if file system is available
or not before using file system api. This PR will add guard for that
Signed-off-by: bac phan <phanhaibac98@gmail.com>
Add stop function to stepper shell. align the function order to match
the one in __subsystem stepper_driver_api struct
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Inside the hci driver API in h4.c, there were no
API function allowing to close the bluetooth
interface, as there were close function defined
for other bluetooth hci driver.
The function disables Bluetooth reception and
sending, and calls a weak function allowing
to implement user specific behaviors
while shutting down bluetooth interface
Signed-off-by: FILLIOT Louis <l.filliot@lacroix.group>
When the continuation length is not 0, there is a reported error.
In current implementation, the total length is only valid only when
the frame is the first block of the SDP response. For following
continuous frame, the total length is 0.
So, change the condition to `(total != 0 && frame_len > total)`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Replace a few references to native_posix / the native_posix ethernet
driver with native_sim, or native_tap.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename this driver to eth_native_tap, including renaming all its
options.
The old options remain until v4.4, but as deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME with the equivalent for
native_sim NATIVE_SIM_SLOWDOWN_TO_REAL_TIME.
native_sim accepted transitionally NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME
to ease porting from native_posix, but this option is being deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CONFIG_POSIX_C_LIB_EXT will get support for fnmatch() function.
The old CONFIG_FNMATCH is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update Kconfig to not select BT_TICKER_REMAINDER_SUPPORT for nrf54L
Add BSim tests to cover using a ticker without BT_TICKER_REMAINDER_SUPPORT
and expire info enabled
Signed-off-by: Troels Nilsson <trnn@demant.com>
A few things were not flagged by CONFIG_BT_TICKER_REMAINDER_SUPPORT
that should have been; This caused building without it to fail
Initialize remainder to 0 where used with ticker_next_slot_get_ext(),
since it may not get set if remainder support is off
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add low-power-write property to MSC device tree node, set
MSC_WRITECTRL_LPWRITE if enabled.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Introduce separate flash driver for Silabs Series 2. This driver
is forked from the Gecko flash driver with no changes outside of
formatting and naming.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
An option is added to allow vendor specific processing at
scmi_shmem_write_message() and scmi_shmem_read_message().
Additionally code has been added specific to NXP which has
some extended validation features.
Signed-off-by: Andre Heinemans <andre.heinemans@nxp.com>
When we receive piggybacked Ack, it means that we have
received all information for this request.
There is no need to track exchange lifetime anymore.
Once we reset the internal request, it is free to be used
for the application. So if we only have few requests allocated,
it would be slow to send those as get_free_request() only
gives request structures that don't have a lifetime left.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
CMSIS modules dsp and nn sets the optimization flag -Ofast for their
libraries. I've now made a new compiler property optimization_fast to
avoid using ifdefs in the cmsis CMakeLists.txt files.
I've update GCC and arcmwdt (not sure if arcmwdt supports -Ofast)
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
This patch will disable DMIC IRQ handling in DMIC driver
because it is now managed by Mic Privacy driver
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
