Following introduction of hsi-div on L0, upate hsi description on l0.
Since this description is not compatible with l1 series anymore add a
dedicated l0 test variant and matching overlay.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Since the broadcast ID is generated at runtime, it is nice
to get it printed so that it can be shared.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since the broadcast ID is generated at runtime, it is nice
to get it printed so that it can be shared.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When scanning, the broadcast_scan_recv now prints the broadcast ID
and the broadcast name (if found). Without this, it is not possible
to use the shell to scan for an unknown broadcast ID or broadcast
name.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The adv-create command no longer takes a name, and the shell
documentation has been updated to reflect that.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The adv-create command no longer takes a name, and the shell
documentation has been updated to reflect that. Instead the
device name can be added via the adv-data command.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Previously, the Kconfig option `NET_GPTP_CLOCK_ACCURACY_2_5MS` had a
incorrect description "1.5ms".
Signed-off-by: Jonas Spinner <jonas.spinner@burkert.com>
remove `select MDIO` from the
ethernet drivers, that don't directly use mdio
and only use the ethernet phy api, now that the
phys select MDIO
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
devices on a bus are recomended to
select its needed drivers, apply this to the eth phys
that need gpios, so that they just work by
enableing the device in the dts.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
devices on a bus are recomended to
select its protocol, apply this to the eth phys
on the mdio bus, so that they just work by
enableing the device in the dts.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
When GPIOF4 and GPIOF5 are not used as USB alternate function,
the default 15K pull-down should be disabled.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
From avdtp spec, the get_all_capablities should be used if the avdtp
version is v1.3, otherwise the get_capabilities should be used.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
This file contains macro definitions for baudrates that are not needed ;
probably leftover from an earlier iteration of the binding that used an
enum for the baudrate(?)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Due to a mismatch in naming of debug jtrst pin name
(compared to hal_stm32) all boards based on stm32wba5x
are not compiling.
This temporary fix will solve this issue until a systematic
approach will be put in place.
Signed-off-by: Alessandro Manganaro <alessandro.manganaro@st.com>
In bt_gatt_write_without_response_cb there is a check for
write != length. However since the call to bt_att_create_pdu
should ensure that this is possible, this should never happen.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since there is a retry mechanism implement, this is not something
that the user needs to be warned about.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When an API function returns an appropriate error code,
LOG_DBG is better suited than LOG_WRN or LOG_ERR as the
caller can handle the return value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For user-initiated requests like notifications, read and write
requests, there will be an error code, so there does not need to be
a generic LOG_ERR if these fail to be allocated.
However if the response or (indication) confirmation PDUs fail
to be allocated, these should still be logged as errors.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use LOG_DBG rather than LOG_WRN, as that is an expected
scenario when using K_NO_WAIT (e.g. when sending
GATT notifications), and it is better for higher layers
to determine if this is indeed an error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the region name token to describe the location of sections.
Because for some linkers (e.g. llvm lld) region_name and "region_name"
are not the same.
Signed-off-by: Mikhail Siomin <victorovich.01@mail.ru>
`bt_att_recv`, which parses ATT PDUs, already contains code that
responds with `BT_ATT_ERR_NOT_SUPPORTED` if a given handler is not
implemented.
Therefore, `att_prepare_write_req` and `att_exec_write_req` handlers do
not need to explicitly return `BT_ATT_ERR_NOT_SUPPORTED` when
`CONFIG_BT_ATT_PREPARE_COUNT` is set to 0 and can be completely removed.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds infrastructure to allow the execution of a function on
a different CPU. The function to be executed on another CPU
runs within the IPI handler at ISR level (and is thus subject
to those constraints).
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
We have a few checks that report warnings, and for some of them it's
actually the _only_ type of failure they report, so it can be confusing
when the output of check_compliance.py says the "check failed" and lists
all the things that are effectively warnings as "ERROR"s.
This commit makes the output more clear by differentiating between
warnings and actual errors, both when printing out individual failures,
but also when printing the summary for each test case (ie. a test case
is said to be "failing" only when it has at least one error, and is only
showing up as having warnings if it only contains... warnings).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The repository has been moved to a new organization, see
https://pyocd.io/. Update links to the pyOCD repository.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
z_nxp_os_timer_ignore_timer_wakeup() was only added
when Standby mode was enabled. Move this function
out of the conditional section.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
As it's not being used anywhere in the driver. Moreover, the extra
unref would trigger a double-free assert (#94311); which is what
motivated this cleanup.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
In order to allow the linker to place certain objects into external RAM,
e.g. heaps, adjust the memc initialization level to PRE_KERNEL_1, allowing
clock control and memc to come up before priority objects like heaps are
initialized.
Signed-off-by: Pete Johanson <pete.johanson@analog.com>
Determine event discardability after parsing the HCI header and require
at least one byte before reading the LE subevent. This removes a possible
OOB read on malformed/short LE Meta events. Also mark LE Extended
Advertising Report as discardable, matching legacy Advertising Report to
reduce RX pool pressure during heavy scanning.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The TX flow control semaphore was initialized with a count of 1 and
released again after every bt_esp32_send() call. This broke the VHCI
flow control contract and could allow sending more packets than the
controller advertised.
This prevents host/controller overruns and ensures proper synchronization
with the ESP32 VHCI interface.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fix a bug where if CONFIG_UART_ASYNC_API was enabled in the config, the
interrupt flags would get cleared after the interrupt driven API callback
finished executing, causing data loss if data happened to arrive after the
callback but before the flags were cleared.
Signed-off-by: Kamil Krzyżanowski <kamnxt@kamnxt.com>
Re-organize groups, including addition of a top level "Binary
Descriptors" group that becomes the main entry in OS Services
Add missing documentation to some API (bindesc_entry, with public
fields, and bindesc_handle, opaque)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group name was incorrectly used as a brief description ;
used the opportunity to fully clean-up file and group
definition
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
