Let uOSCORE and uEDHOC Kconfigs select required PSA Crypto features
instead of having them selected in Mbed TLS' Kconfigs. Besides this the
previous configuration was enabling legacy support in Mbed TLS whereas
uOSCORE/uEDHOC use PSA Crypto APIs.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
uOSCORE and uEDHOC only use ECDSA and ECDH for signatures and key
agreement respectively, so the support for RSA is not required.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Remove one last (?) mention of NIOS II in the docs ; use it as an
opportunity to mention recently added support for Renesas RX.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Recent test specification added additional test for validating
invalid packet sizes on L2CAP signaling channel. IUT is allowed
to either disconnect link, ignore packet, reject packet or
issue a warning to upper tester if other action is taken.
To keep things in line with previous check for too small size
simply ignore fixed size packets of invalid length.
This was affecting L2CAP/COS/CED/BI-11-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Instead of checking whether a custom implementation is present, check
whether the AEAD one is used.
This allows downstream users to expand the implementation choice with
more options.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Some ITS store module implementations may make use of them.
This is the case of the custom one in the
secure_storage.psa.its.secure_storage.custom.store test.
Instead of making transform.h conditionally available, move the definitions
to common.h and simply make them available whenever the ITS transform
module is enabled.
At the same time, remove unneeded/redundant includes/build asserts.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Instead of checking for CONFIG_SECURE_STORAGE_ITS_TRANSFORM_AEAD_*_CUSTOM,
check for any of the existing providers.
This allows downstream users to expand the choices with more options
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add board-specific overlay file for the adc_dt sample
on the STM32F0-DISCO board to enable ADC channel support.
Signed-off-by: Sudarsan N <sudarsansamy2002@gmail.com>
The bt_csip_set_member_register kept a counter that was not
decreased when bt_csip_set_member_unregister was called.
This meant that we could register and unregister CSIS,
but we could not re-register once it had been unregistered.
This commit fixes this by removing the counter and instead
rely on the service instance state, which also requires restoring
the original service definition, as well as adding a test that would
have failed with the previous version.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add new configuration options for runtime PM to the release notes,
including stack size, priority, and system work queue usage. Update
the runtime PM documentation to explain the implications of using the
system work queue and disabling asynchronous operations. Include a new
version of the sequence diagram for asynchronous operations.
Signed-off-by: Flavio Ceolin <flavio@hubblenetwork.com>
Async now uses its own work queue, which means it consumes more
resources. Since not all applications need the async API, we can make
it optional without any penalty for those applications.
Signed-off-by: Flavio Ceolin <flavio@hubblenetwork.com>
Device runtime is using the system workqueue to do operations
that are mostly blockers (suspend a device). This should not happen.
This commit adds an option to use dedicated queue for the device runtime
async operations.
The test for this API was assuming that the system workqueue
priority (which is cooperative) so we need to change the test priority
to be lower than the device runtime workqueue priority.
Signed-off-by: Flavio Ceolin <flavio@hubblenetwork.com>
A -1 was missing from the timer value calculation. In addition,
DIV_ROUND_CLOSEST was replaced with a custom macro fixing #84782.
Signed-off-by: Sergei Ovchinnikov <sergei.ovchinnikov@nordicsemi.no>
Based on a dicussion on the Bluetooth SIG GAWG reflector, it is
not allowed for a broadcast assistant to request specific BIS
indexes as well as BT_BAP_BIS_SYNC_NO_PREF in the same
request.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Based on a dicussion on the Bluetooth SIG GAWG reflector, it is
not allowed for a broadcast assistant to request specific BIS
indexes as well as BT_BAP_BIS_SYNC_NO_PREF in the same
request.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit splits the CAP and GMAP audio configuration (AC)
tests into separate scripts. The purpose of this is to reduce
the runtime of the individual scripts (some, like the cap_ac_11,
tests takes a long time to run all combinations).
This split also improves support for running them in parallel.
An additional, positive, side effect of this is that the logs will
also be smaller per run.
The new scripts can be run directly, or via the e.g. _cap_ac_X.sh
scripts that run entire audio configuration for all presets.
The design of how the parameters are passed around, are based
on variable instead of function arguments. Effectively they can
be used for the same thing, but variables have the advantage
that it is easier to deal with longer names,
and that any of the test scripts can be called with additional
arguments that can, when using variables, easily be forwarded
to the call to Execute for the PHY in the
_ac_common.sh.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix issue where STM32 I2C LL driver could block forever when SDA and SCL
are shorted and interrupts are disabled (CONFIG_I2C_STM32_INTERRUPT=n).
Added timeouts to all blocking wait loops in the STM32 LL I2C driver to
avoid indefinite blocking.
Fixes#88506
Signed-off-by: Jean Nanchen <jean.nanchen@hevs.ch>
Added network type check to fix the system crash caused by non-wifi
network card calling wifi api interface
Company:BSH Crop
Signed-off-by: Chen Tao <ct05342@163.com>
"udp bind" and "udp send" commands use the same net context
variable and they fail early if the context is already used.
This prevents from using "udp send" after "udp bind", which
makes the commands hard to use for testing bidirectional
communication. Make "udp send" reuse the already bound
context if possible, and resort to allocating temporary one
otherwise.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
When execute `bt connections`, only the peer device address of selected
LE connection is flagged with `*`.
Improve the command `bt connections` to support BR connections.
Regardless of the connection type, `*` will be shown to indicate the
peer address of the current connection if the peer device address is
the peer address of selected connection.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
This commit removes the requirement for DNS_RESOLVER. If DNS_RESOLVER is
enabled, hawkbit uses `CONFIG_DNS_RESOLVER_MAX_QUERY_LEN` for the
server_addr buffer, if disabled it uses `CONFIG_INET6_ADDRSTRLEN`.
This adheres to #89533 which removes the requirement for DNS_RESOLVER.
Signed-off-by: Neal Jackson <neal@blueirislabs.com>
This commit adds a `strnlen` length check for `server_addr` to ensure that
it will not be truncated and result in a silent failure. Instead, the
call to `hawkbit_set_config` will return -EINVAL if the supplied
`server_addr` is too long for the internal buffer.
Signed-off-by: Neal Jackson <neal@blueirislabs.com>
The hawkbit subsystem was erroneously using DNS_MAX_NAME_SIZE as the
maximum query length. This limited query strings to only 20 bytes,
truncating many domain names.
Signed-off-by: Neal Jackson <neal@blueirislabs.com>
Because this is a common testing scenario, almost any counter instance
should be able to run. Some counter instances cannot run this sample
should be filtered by platform_exclude or filter keywords.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Migrate renesas,ra-agt-counter implementation to use hal_renesas.
Add additional AGT_CLOCK_SUBCLOCK count source.
Add constraint for counter resolution to 32 or 16 bit variant.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Updated set_drp_toggle to handle differences in TCPCI revisions.
Added a macro for TCPCI revision and read it from the chip register
during initialization.
Signed-off-by: Jianxiong Gu <jianxiong.gu@outlook.com>
When TF-M is enabled, Mbed TLS's MD module (which is used to generate
v5 UUIDs) will dispacth hash operations to TF-M. Unfortunately TF-M
does not support SHA-1 (because it's a weak algorithm) so the
computation will fail.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
