Now that api core functions check that denominator / numerator are not
null, it is no more necessary to perform this check within drivers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Now that video api functions have __ASSERT_NO_MSG calls, drivers
do not need to check the entry point functions pointers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Protect video API functions via __ASSERT_NO_MSG call to ensure that
required pointers are valid when entering functions.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Instead of relaying on stddef.h being included by other headers
let's include it explicitly, following a report of it being
missing for Ubuntu 22.04 (glibc 2.35)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The recommended reset sequence from the datasheet is as follows:
void SSD1309 ()
{
RES=0;
delay(1000);
RES=1;
delay(1000);
..
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
file should be named after the compatible and these files where using
an incorrect vendor prefix.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updated the description in the gd,gd32-i2c.yaml file to reflect the
correct name "GigaDevice" instead of "GigiDevice".
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Set new default minimum sleep amount for each power state. Users can
still update these values depending on their needs.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
This commit enables power_mgmt_soc test for MAX32655 boards
- max32655evkit
- max32655fthr
RTC clocked in most low power modes so that this timer
is linked with idle timer. By this way device able to wakeup
from low power modes.
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
This commit enables power_mgmt_soc test for MAX32690 board
Low power timer is used as idle timer that will wakeup device
from sleep modes. Lowpower timer clocked with RTC clock which
always on.
RTC can be used as idle clock timer too, in that case below
line need to be added in overlay file
/ {
chosen {
zephyr,cortex-m-idle-timer = &rtc;
};
};
&rtc {
status = okay;
wakeup-source;
};
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
To simplify usage add dependecy to MAX32_ON_ENTER_CPU_IDLE_HOOK
If CONFIG_PM not defined set to to y as current,
If CONFIG_PM defined not set it
If user set CONFIG_PM not need to disable
MAX32_ON_ENTER_CPU_IDLE_HOOK anymore
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
This commits added power management states in max32xxx MCUs
Common states added in max32xxx.dtsi file and additional ones
added in max32655.dtsi
Exit-latency-us value set as per of device datasheet spec.
The typical value is mentioned in DS is multiplied with 2.
For more information please take a look:
https://www.analog.com/en/products/max32655.html
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
low-power pins can be used while device power management enabled.
Usage
...
&uart0a_rx_p0_0 {
pinmux = <MAX32_PINMUX(0, 0, AF1)>;
low-power-enable;
/* Add low power mode flags, like: */
output-high;
bias-disable;
...
};
...
Default gpio sleep states are defined, user shall update sleep_pins
configuration as per of their needs
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Some API function pointer types such as set/get_format(),
set/get_frmival() are indentical. Combine them to save some spaces.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
This commit modifies the MAX30101 sample to produce a generic heart rate
sensor sample.
Support for the BH1790 sensor is added.
Signed-off-by: Magpie Embedded <magpieembedded@gmail.com>
This commit adds a driver for the BH1790 Heart Rate Monitor IC.
Based on the approach used by the MAX30101 driver, an existing optical
heart rate sensor with a sample in Zephyr.
Signed-off-by: Magpie Embedded <magpieembedded@gmail.com>
Add Josuah Demangeon "josuah" and Phi Bang Nguyen "ngphibang"
as maintainers for video drivers.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Remove the TSC approval requirements for binary blobs. Clarify
in the language that the submitter and reviewers shall ensure
that all binary blob requirements are being met before approval
and integration into Zephyr.
Signed-off-by: David Leach <david.leach@nxp.com>
Commit 42fb9067e4 makes it mandatory to
now have reg-names property on the riscv,machine-timer node. This DTS
file was somehow missed as part of the refactoring.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Clarify the changes introduced in machine timer bindings:
* Several legacy compatibles (e.g. andestech,machine-timer,
neorv32-machine-timer, etc.) have been unified under riscv,machine-timer.
* MTIME and MTIMECMP addresses must now be specified explicitly using the
reg and reg-names properties.
* The reg-names property is now required and must match the reg entries
one-to-one.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
This commit updates all relevant device tree source files using the
riscv,machine-timer binding to explicitly define `reg-names` for the MTIME
and MTIMECMP registers.
This change ensures compatibility with the updated riscv_machine_timer
driver, which now relies on `reg-names` to resolve register addresses
instead of using fixed index positions.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
This commit updates the riscv_machine_timer driver to resolve MTIME and
MTIMECMP register addresses by their `reg-names` instead of relying on
index order.
This improves clarity and robustness in DTS bindings, and is a prerequisite
for handling cases where not both MTIME and MTIMECMP registers are present
or accessible.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
The set_assignees.py script detects platforms
by checking if the Area title contains the string
"Platform", this was missing for some NXP
Platforms, so this adds it. This way the platform
maintainers are assigned preferably.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Use a form based template instead of freesyle template. This will force
bug reporters to follow the template and provide the needed information
and will make triage easier and bug reports consistent.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Just move a code with workaroud to convert platform names
to the full name with variants.
It fixes an issue, that not every platforms are printed
before running tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
`timings` is an array of `struct i2c_config_timing` (3 x `uint32_t`).
`i2c_timings_##index` is an array of `uint32_t` (hence the cast when it
is assigned to `timings`). Therefore `ARRAY_SIZE(i2c_timings_##index)` is
off by a factor 3 when used for `n_timings`.
Parentheses around the second `sizeof` are there to silence the gcc warning
(-Wsizeof-array-div) that warns about not computing the size of
`i2c_timings_##index`.
Signed-off-by: Wouter Horré <wouter@versasense.com>
