When using synthesized low frequency clock, HFXO should be running
to ensure correct frequency.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
In previous implementions, when there is no buffers in TX queue in a TX
callback context, TX will be stopped immediately. It is not correct
because there may still TX blocks in DMA TX transfer queue.
TX should only be stopped when DMA queue is empty and no more in I2S TX
queue.
Another modification is to set correct TX water FIFO level.
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
Use TX and RX blocks on SAI for i2s speed test, by this way we can avoid
HW reworking.
Update Readme file and DMA channel configuration in overlay file to avoid
DMA channel conflict with other peripherals like UART.
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
Added initial CCP client implementation that simply
does discovery of TBS on a remote CCP server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removes an unnecessary clearing of the current CPU's swap_ok field
in do_swap() as that clearing is already done at the end of next_up()
which was just called by z_swap_next_thread() a little earlier.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
SMP does not need to mark the current thread as queued in
k_yield() as that will naturally get done in do_swap().
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
- Add overlay to support test app pwm_api for voice_ra4e1
- Add support test app pwm_loopback for fpb_ra4e1 and
voice_ra4e1 boards
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Get build error when using a gpio port that has port_irq_names
property isn't defined. This commit aim to fix this bug.
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `lib` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Jump straight to the exit portion of the function in the case that
psa_destroy_key() failed and we set err to a non-zero value. This also
fixes Coverity CID 487701 "Code maintainability issues (UNUSED_VALUE)".
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
nxp_nbu_init extern definition is under CONFIG_NXP_RW6XX_BOOT_HEADER
and this produces an implicite definition warning when
the Kconfig is disabled. This is the case when both BLE Kconfig
and MCUboot bootloader Kconfig are enabled.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
The clock source for LPUART0 for the MCXC family is already
initialized in the corresponding soc.c -> clock_init().
Initialization for LPUART1 is missing. This is however
necessary if a user wants to configure LPUART1 as the default
console output.
Signed-off-by: Maximilian Werner <maximilian.werner96@gmail.com>
In the device that has `DT_DRV_COMPAT` equal to `st_stm32_usb`,
its behavior differs from `st_stm32_otghs` and `st_stm32_otgfs`
due to the underlying `HAL_PCD_IRQHandler`.
As a result, calling `usbd_ctrl_feed_dout` for the DOUT stage is not
compatible with the `st_stm32_usb` device.
Instead of calling `usbd_ctrl_feed_dout`, we still require flushing
the TX FIFO to the host.
This is achieved by calling `HAL_PCD_EP_Receive` with `len` = `0`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Currently, the SPI pinctrl is incorrect for the spi0 node.
In this PR (#77850), we changed the pinctrl number for SPI
from spi0 to spi1, but we forgot to update the node name
to spi1.
This commit aims to:
- Correct the spi node in test app spi_loopback for ek_ra8d1
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Currently, the SPI pinctrl is incorrect for the spi0 node.
In this PR (#77850), we changed the pinctrl number for SPI
from spi0 to spi1, but we forgot to update the node name
to spi1.
This commit aims to fix:
- Correct the pinctrl name for spi
- Correct the spi node on ek_ra8d1.dts
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
-Adding explicit include for mbedtls/platform_util.h to get acces
to mbedtls_platform_zeroize in ITS. Somehow not visibile in Zephyr but
it caused build issues in nRF Connect SDK.
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
Instead of pre-generating the JSON batch to then execute it, use
command-line arguments and --x-append-batch to generate the JSON file
tht will then be passed to x-execute-batch.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adjust the PIO assemble for the UART RX to wait for the line
to initially be high before starting the wrap loop and wait
for a low start bit.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
A problem was discovered during development: the
electrical characteristics of the pins were not
set according to the device tree settings.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
This header file provides the public API of the UDC driver,
however it also contains inline function definitions.
Unfortunately these definitions contain implicit pointer conversions,
which are one of the cases where valid C syntax is invalid C++ syntax,
meaning that any C++ source code that intends to use the UDC API
cannot be compiled error-free (or warning-free, if using -fpermissive).
Signed-off-by: Benedek Kupper <kupper.benedek@gmail.com>
Energy efficient mode is the feature of the DM8806 described in the
EEE 802.3az Energy Efficient for reducing power consumption. For unknown
reason it seams to not working correctly with all endpoints and sometimes
the network randomly fails when this mode is on. Thus it is now possible to
turn off it in compile time by KConfig option:
PHY_DM8806_ENERGY_EFFICIENT_MODE if in case of network problems
Signed-off-by: Robert Slawinski <robert.slawinski.ext@indurad.com>
Bring the change that was already in place for the qemu_cortex_m3 board
to all the other ones, since also nrf52840 had a similar problem
(see issue #82812).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
-Mbed TLS requires common.h to build. The sample provides common.h
in sample folder level but included the path to zephyr_interface.
This commit changes the include to be sample-specific
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
The current nxp_mcxc141.dtsi sets the SRAMs base address
to 0x1FFF_F000. This leads to the mcxc141 faulting during
initialization when the first write to SRAM occurs:
z_prep_c -> z_bss_zero -> z_early_memset -> memset
The correct base address is 0x1FFF_F800. This information
is not obvious in the "MCX C24X Sub-Family Reference Manual,
Rev. 1, 07/2024". The address was taken from an MCUXpresso
IDE sample project.
Link: https://www.nxp.com/webapp/Download?colCode=MCXC24XP64M48RM
Signed-off-by: Maximilian Werner <maximilian.werner96@gmail.com>
The directory doesn't (anymore) belong only to JWT.
Assign the headers in this directory to their areas on a per-file basis.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
This change initializes was_valid_access in the case that
CONFIG_X86_KPTI is selected. Previously, the variable was
causing an uninitialized variable warning that would be
escalated to an error when run with twister.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Make sure MTU is validated to avoid reading pass command buffer.
Also make more explicit check in response length validation.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This may cause some compiler warnings due to flexible array being
used in btp_hdr. Simply avoid it and do explicit pointer type cast
where needed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
