Add support for pinctrl to cc23x0 SoC. Like for other TI SoCs,
a node approach is implemented (no grouping approach).
Signed-off-by: Lars Thalian Morstad <l-morstad@ti.com>
Signed-off-by: Vebjorn Myklebust <v.myklebust@ti.com>
Signed-off-by: Stoyan Bogdanov <sbogdanov@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Add support for flash to cc23x0 SoC. The driver interacts with VIMS
(Versatile Instruction Memory System) internal bus standing before NVM.
Signed-off-by: Stoyan Bogdanov <sbogdanov@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Sync with simplelink_lpf3 support for cc23x0r5 SoC.
Signed-off-by: Stoyan Bogdanov <sbogdanov@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
The sample defines an image that uses RAMdisk and also provides an
option to enable USB DFU flash backend for the "slot-1" flash partition.
Assuming the user runs this sample from the slot-0 partition, uploading
to flash should work fine for evaluation purposes.
If the sample is built with CONFIG_BOOTLOADER_MCUBOOT=y, the sample will
mark the image in slot 1 as pending after an image download.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a simpler flash backend, similar to what we have in the legacy USB
DFU implementation. Support slot-0 and slot-1 flash partitions, but
allow them to be enabled/disabled via Kconfig options.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This new implementation is written from scratch and is not tied to the
image manager and MCUboot. It allows the user to define their own
backend and use a simple macro to instantiate an image. On the USB side
this is represented by an interface. The number of possible images is
configurable using the Kconfig option, and is a fairly inexpensive
approach since it only changes the size of the pointer array. The number
of images is only limited by the number of possible interfaces in a
configuration. The class implementation does not support multiple
instances, as there is no real use for it. However, it does provide two
class instances, one for runtime mode and one for DFU mode. The switch
from runtime to DFU mode can only be performed by the user application,
i.e. the application receives a notification when the host wants to
switch to DFU mode, and then the application can disable the runtime
configuration and enable the DFU configuration. This implementation does
not support switching to the DFU mode by bus reset issued by the
host.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the usbd_register_all_classes(), we may need to skip some instances
as they may have very specific function like USB DFU "DFU mode" which
should not be available by default.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
After recent kernel changes there's some thread scheduling race when
running tests, therefore add k_yield() at the end of the test to make
sure the network stack has a chance to run in between tests.
Make sure CONFIG_NET_TCP_TIME_WAIT_DELAY is set to 0 so that TCP
connections are released immediately.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After recent kernel changes there's some thread scheduling race when
running tests, therefore add k_yield() at the end of each test to make
sure the server thread has a chance to run and do the cleanup.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Propagate device tree configuration for the power amplifier to
the HAL configuration header.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
When the SiSDK HAL was introduced, a corresponding Kconfig option
was not. Update Series 2 SoCs to use the new option.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Enable support for warm reboot for x86 arch as per the Reset Control
Register description.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Add a DEVICE_DT_GET_BY_IDX macro to get a struct device reference for a
phandles node. This can be used directly as an argument of macros such
as DT_INST_FOREACH_PROP_ELEM_SEP.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
nRF boards have a ROM crunch esp. with combined with Matter/networking
features, as the advanced features are not essential for typical Wi-Fi
operation, disable them by default. Individual samples can choose to
enable it.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
yasinustunerg is an ADI employee and has contributed several PRs in ADI
areas, add him as a collaborator.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Explicitly add default trigger mode as none in the kconfig trigger
template for better readability.
Signed-off-by: Mayank Narang <narang.may77@gmail.com>
For the CPU-based drivers, delete the old MCUX based RTIO driver and use
the default RTIO submit implementation instead.
Rationale:
- 300 LOC -> 1 LOC to maintain.
- MCUX SDK based driver cannot control the chip select for the transfer
properly, but the new spi_nxp_lpspi.c driver can. So this fixes the
bug with the PCS when using RTIO.
Also enable the default RTIO implementation for DMA based driver.
In the future a DMA based RTIO driver with custom implementation can be
designed, but for CPU based transfer, which is already not optimal
performance, code maintenance is more important. Only requirement is
asynchronous submit, which is accomplished by p4wq in rtio workq.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Added SOC DTS for MCXW72
Adding BLE required info to MCXW72 dtsi
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Add test support for Counter driver of RZ/G3S-SMARC
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Generate a proper Cmake warning when signing tool isn't available.
This also allows not to fail in Github CI.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Update stm32n6 based boards documentation to reflect addition
of new sb variant and how it could be used for twister tests automation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
