Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add tests that will verify that IP address with an optional mask
string is properly parsed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adding a helper to parse one or more IPv4/6 strings with optional
netmask or prefix length.
Example of the string:
2001:db8::1/64,192.0.2.1,2001:db8::2,192.0.2.2/24
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
All connection information was printed only if connection debugging
was enabled which then did not print information about Wireguard or
DHCP handlers. Limiting the printouts like this is not really needed
so print all connection information with "net conn" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is useful in testing to allow user to change the default
network interface by "net iface default <index>".
Also print out the default interface for "net iface" and
"net iface default" commands.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Sometimes it is useful to view low level network interface information
in the network shell. Enable such prints if network interface debugging
is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of just printing a warning, fail (return != 0 to the shell)
if a test is missing, or a pattern does not match any test.
Also, warn (and return != 0) if no tests are found when SEARCH_PATH
is provided.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
We never got to add any multidevice tests to the UART driver tests.
So let's not try to run that empty set in CI.
(we have some multidevice UART tests for BT).
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
tests/bsim/bluetooth/ll/bis/tests_scripts/broadcast_iso.sh
was split in two in 872b19321f
but for the 54L15 and 5340 it was forgotten in the list of
tests to run.
Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add calls to sys_trace_idle and sys_trace_idle_exit in nrf54h specific
idle states to allow measuring CPU load on nrf54h20 when power
management is enabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add sys_trace_idle_exit to RISCV cpu_idle functions and allow
enabling CPU_LOAD module for RISCV and disable it for SMP.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add new tag to xg29_rb4412a.yaml file and remove pm ignore tag in order
to enable more tests for the xg29_rb4412a board.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Add some overlay files for the silabs xg29_rb4412a board to enable tests
on the board. Also add the platform to some testcase.yaml files.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Remove deprecated nxp,kinetis-lptmr compatible string
which is superseded by nxp,lptmr compatible due to
removing family specific name.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
These socs were missing a config line to disable SYSTICK if the LPTMR is
configured for the system timer, similar to how other SOCs do this for
alternative system timers than systick.
This fixes build errors in the case where that lptmr kconfig is enabled.
Also, the LPTMR kconfig should be default no because it is a secondary
option for the system timer, being lower resolution than systick. This
also resolves build errors.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The set size can now be dynamically set and notified.
The rank is added as a argument in the case that changing
the set size, also affects the device's rank, as ranks
in a coordinated set needs to be continuous.
The set coordinator implementation has been updated
to support receiving the new set size, and providing
this information to the upper layers.
This commit adds a babblesim test for the new API,
as well as a shell command.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The current overhead check needlessly flushes some events for
CONFIG_BT_TICKER_SLOT_AGNOSTIC resulting in some lost or incomplete
advertising events; Use a lower overhead value for this configuration
to avoid that
Signed-off-by: Troels Nilsson <trnn@demant.com>
Since tester_send_with_index may be called in different threads,
we need to guard the 2 calls to uart_send to avoid
sending partial btp message from 2 or more threads.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Migrate LINKLAYER_PLAT_EnableIRQ and LINKLAYER_PLAT_DisableIRQ
from linklayer_plat.c (hal/stm32 module).
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
Migrate LINKLAYER_PLAT_EnableRadioIT and LINKLAYER_PLAT_DisableRadioIT
from linklayer_plat.c (hal/stm32 module) and adapt it using irq
Zephyr APIs.
Correct casting of irq type between using NVIC APIs or irq Zephyr APIs
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
Increase the link layer thread priority to be more than the BLE CTRL
thread and more than the Zephyr BLE stack threads.
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
This commit adds support for Wi-Fi status and statistics
functionalities:
- wifi status : Displays the current mode status.
- wifi statistics : Provides details on the transmitted and
received packet counts.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
This commit adds support the following wifi commands:
- wifi ap disconnect: Disconnect a specific station from the AP.
- wifi ap stations: List connected devices.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
This commit introduces Access Point (AP) mode support
It enables the following AP-related commands:
- ap enable: Enable the AP mode.
- ap disable: Disable the AP mode.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Adds a test to verify Armv8.1-M MPU architecture's PXN attribute.
Verify PXN via static mpu config by utilizing existing __ramfunc MPU region
Since previous commit changes the behaviour of __ramfunc region,
executing userspace code in this region in privileged mode will
result in an MPU fault while execution in unprivileged mode should
work fine.
Verify PXN via DT by creating a custom section in the unused SRAM region.
Since the overlay sets the PXN attribute for the SRAM, executing code
in this region in privileged mode will result in an MPU fault while,
execution in unprivileged mode should work fine.
Also, instead of testing DT config for each board, do it only for MPS3
boards that which can be tested with simulation.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
