Enalbe II2C hal driver status polling timeout in order to avoid
blocking of some driver API, such as kernel hang during i2c scanning.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add dt_compat_enabled_num Kconfig helper function for counting the number
of compatible nodes with status okay.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The siwx91x need a specific firmware image format. These image end with
.rps extension. The current name of the image is zephyr.bin.rps. However,
the .bin suffix is not relevant. It makes even more sense if we consider
the output of west sign: zephyr.signed.bin.rps. We can simplify these name
by remove the .bin suffix.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Once the keys has been provisioned on the Silabs siwx91x, the chip expects
the firmware to be properly signed.
This PR automate the signing process. Hence, "west flash" will work as
expected.
Co-developed-by: Aasim Shaik <aasim.shaik@silabs.com>
Signed-off-by: Aasim Shaik <aasim.shaik@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Silabs siwx91x support signed and encrypted firmwares. This PR includes
support for these features in "west sign"
Co-developed-by: Aasim Shaik <aasim.shaik@silabs.com>
Signed-off-by: Aasim Shaik <aasim.shaik@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Disable generation of .hex output, since the Commander runner
prefers it over the .bin output but SiWx91x needs a .bin.rps file.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Co-developed-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Use runners_yaml_props_target to set the name of the file to
flash, rather than hard-coding it for each board.
Co-developed-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Like other API in DNS cache, `dns_cache_remove` should check arguements
return -EINVAL if any of them is NULL.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
STM32H7 spi_loopback test fails since the introduction of a test enabling
SPI_HOLD_ON_CS.
This uncovered an issue where the SPI ISR is constantly called if the SPI
is not disabled, even if the interrupt enable register is completely
cleared.
A workaround is to disable the SPI IRQ at the NVIC level when
SPI_HOLD_ON_CS is used.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Enable parsed results to be printed to the console in addition
to being exported, rather than requiring one or the other.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
If exporting to multiple formats (e.g., HTML and JSON), do not stop
after the first format when errors are found. Instead, continue
exporting to all specified formats and only exit afterwards.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
MAX32657 introduces changes for registers named (master, slave) to
(controller, target) this causes build issues
Signed-off-by: Mert Ekren <mert.ekren@analog.com>
Some architectures use pseudo instructions in assembly.
Introduce an option that allows forcing raw instruction mnemonics.
Currently implemented for GNU binutils.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Commit 64149e4df6 added an "#if defined()"
for configuring DMA channels differently depending on SOC family of the
STM32 HAL, but did not include the STM32H7 family in the same group as
STM32F7. Fix it by adding the STM32H7 in the same #ifdef filter.
Fixes#92015
Signed-off-by: Josuah Demangeon <me@josuah.net>
This change adds two macros that allow the user to specify the section
the memslab buffer should be allocated from. This is useful for systems
where memory must reside in DMA-able memory like USB.
Signed-off-by: Victor Brzeski <vbrzeski@gmail.com>
Allow overriding puncover default host and port. Using
PUNCOVER_HOST/PUNCOVER_PORT it is possible now to set the host and port
to something else other than the default.
example:
export PUNCOVER_HOST=10.0.1.1
export PUNCOVER_PORT=8088
will start puncover on 10.0.1.1:8088 and make it available over the
local network.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add driver for Microchip PolarFire SoC (MPFS) peripheral clock and soft
reset control.
Normally, the peripheral clocks and reset state are controlled by the
Hart Software Services (HSS) running on the Monitor processor. As an
alternative to using HSS services, applications can now enable the reset
controller in a device tree overly, for example:
&reset {
status = "okay";
};
&uart4 {
resets = <&reset MSS_RESET_ID_MMUART4>;
};
Embedded the reset controller node in system controller node.
Signed-off-by: Frank Kühndel <frank.kuehndel@embedded-brains.de>
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Avoid accessing tx_bufs or rx_bufs when they are NULL by adding proper
conditional checks before dereferencing. This addresses Coverity issue
CID 516225 (CWE-476).
Signed-off-by: sudarsan N <sudarsansamy2002@gmail.com>
1. Increased interfaces count as there are 6 MACs on i.MX943.
2. Increased NETC ring length as extended BD will be used.
3. Enabled monitor for gPTP sync status.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
- fixes is25wp064 flash size in DTS. It must be 8 MBytes (64MBits).
- uses DT_SIZE_M() macro instead of an absolute value.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
This set of changes adds support for QSPI-based external flash and
Bluetooth to the device tree. This make it possible to correctly build and
execute the fatfs and several Bluetooth samples out of the box.
Also added a function to read the external flash OTP to extract
information about the Opta model and hardware features and a second
function to retrieve the "official" Opta serial number.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Floating-Point System ID register (FPSID) = 0x41033094
AArch32 Media and VFP Feature Register 0 (MVFR0) = 0x10110222
AArch32 Media and VFP Feature Register 0 (MVFR1) = 0x1111111
MVFR1 SIMDFMAC, bits [31:28] = 0; FMAC is not supported
Signed-off-by: Simon Maurer <mail@maurer.systems>
Recent changes to net_link_addr structure to not use pointers
have made it necessary to update the modem_cellular driver
to ensure compatibility with the new structure definition.
Otherwise, an assertion failure occurs in subsys/net/l2/ppp/ipv6cp.c:40.
This commit updates that link address is set to NET_LINK_ADDR_MAX_LENGTH
least significant bytes of IMEI instead of IMEI total length.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
According to the C standard it is undefined behavior to use preprocessor
directives inside macro invocations.
Cppcheck stops when it see this UB with an error message, and so this
change will improve Cppcheck analysis
This is a refactoring to fix UB, no logical change is intended.
Signed-off-by: Daniel Marjamäki <daniel.marjamaki@cppchecksolutions.com>
This commit adds the following:
* Sensor related usage IDs in the Sensors' page of the HID standard.
* A HID usage macro that works with IDs of 2 bytes.
* A macro to define the exponent in a report descriptor.
The values and naming came from the following document: https://www.usb.org/sites/default/files/hutrr39b_0.pdf
Signed-off-by: Zak Essadaoui <zak0@meta.com>
