This is a preparation for the refactoring. The old "net" command
is renamed "net_old" so that the individual commands can be
placed into a separate .c files.
This is done like this because we need to use the
SHELL_SUBCMD_SET_CREATE() to create the sub-command and then
use the SHELL_SUBCMD_ADD() in the .c files to add the command
into the sub-command and not get conflict with the same name
sub-command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is preparation commit that moves the net shell code to
subsys/net/lib/shell directory. The following commits will
then refactor the code in net_shell.c to smaller and more
manageable pieces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove erroneous comments that don't describe what the test is actually
doing. These comments were probably from copy/pasting test code.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The linker was optimizing away z_shared_isr() the zephyr_pre0.elf image
since the function is not used. However, zephyr.elf does use this
function via isr_tables.c file, generated after zephyr_pre0.elf.
This difference caused a shift in all symbol addresses by the size of the
z_shared_isr() function. isr_tables.c had pointers for zephyr_pre0.elf.
The build system assumes the ISR addresses are the same between both .elf
files, when in fact, before this fix, they were not.
When run on a device, interrupts were calling non-interrupt functions.
Signed-off-by: Dave Desrochers <dave@intercreate.io>
To enable runninng and testing this backend on the POSIX
architecture, we need to allow defining the shared memory
buffer as a compiler provided symbol, instead of a hard
address provided by the DTS.
For this case we refer to a symbol a POSIX arch implementation
(typically the board) needs to provide.
It is the responsability of that implementation to ensure
that symbol exists and points to a memory buffer of the
DT defined size.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The license check workflow quietly stopped working after commit
8f66f854c3. Upgrading the checkout action
changed default behavior to only fetch one commit instead of all history
for all branches, which caused an uncaught fatal error in the scancode
action:
fatal: ambiguous argument 'origin/main..': unknown revision or path not
in the working tree.
The scancode action then completed successfully having not actually
checked anything.
Fix this by setting the checkout action fetch depth to 0, similar to
other workflows.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Add sleep prevention in crucial USB-C stack functions to make
state transitions faster and to send responses faster.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Add internal function that prevents one sleep of the USB-C stack.
It can allow to have longer sleep times to conserve more power, while
still having possibility to respond in the required time and
set specific registers.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The nRF52840 MDK USB Dongle board selects the `uart0` node as
`zephyr,console` in the `chosen` node. This required three additional
options to be y-selected on Kconfig side so that printf/stdout etc. hooks
are properly installed:
* CONFIG_CONSOLE
* CONFIG_SERIAL
* CONFIG_UART_CONSOLE
Without that, no console output is observed.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The MikroE clicker 2 board selects the `uart4` node as `zephyr,console` in
the `chosen` node. This required one additional option to be y-selected on
Kconfig side so that printf/stdout etc. hooks are properly installed:
* CONFIG_UART_CONSOLE
Without that, no console output is observed.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The Ruuvitag board selects the `uart0` node as `zephyr,console` in the
`chosen` node. This required three options to be y-selected on Kconfig side
so that printf/stdout etc. hooks are properly installed:
* CONFIG_CONSOLE
* CONFIG_SERIAL
* CONFIG_UART_CONSOLE
Without that, no console output is observed.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add support for CAN statistics to the Microchip MCP2515 CAN controller
driver. The hardware only supports reporting RX overruns.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a simple test to validate that the CAN statistics accessor functions
can be called from user mode threads.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Defaulting to picolibc when selecting GETOPT is a bit nicer for users
in some cases, but not required.
But too many things require GETOPT (for ex. some SHELL configurations)
in combinations with native posix drivers which do not support
yet embedded libcs (for ex. the native USB driver)
(see https://github.com/zephyrproject-rtos/zephyr/issues/60096 )
Which leads to configurations in those cases which cannot be built.
Keep defaulting to the external libC in this case.
This reverts the getop part of this commit:
5f8057e262
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
As documentation is now built using one of our self-hosted runners,
have the GitHub action only run for the upstream repo, not for potential
forks.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The scaling factor for current measurement was incorrect.
Full range scaling during charge is 1.25 * charge current
limit, and there is no additional scaling factor applied
in different charge modes.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
This commit bumps the hal_atmel module to
revision 942d664e48f7a2725933a93facc112b87b1de32b, which is
commit number 120 on master.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
() Add marks to denote code blocks so they are rendered correctly
on generated pages.
() Fix misplaced in,out in @param. If any parameters are
output, mark the others as input for clarity.
() Also move the previously non-visible comment about the file
into the doxyge group description.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The main new features are a 'west grep' command and a new
'description:' field in the manifest file's 'projects:' elements.
Rather than try to keep the version number in index.rst up to
date, which it frequently is not, just delete the paragraph.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
These are backwards compatible extensions in keeping with
our promise to adhere to semantic versioning from now on.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
The main documentation for the command itself is in the 'west help
grep' output, so just add an entry in the list of built-in commands.
Document the extra config options as well.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
