This current sentence would need to be clarified a bit
further to be really correct:
It is only when building with the host C library that it
applies, but with native_sim we can build with other
libC's.
The twister tests definitions are testing only with
embedded C libraries,
and there is anyway no harm if somebody defines the heap
size even if using the host libC.
So as such it would seem better to just remove this
sentence.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Move the GPIO button dts nodes to the common dts file so it
be selected by either cpu core.
Also fix an error in the GPIO setting for one of the switches.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Update lpcxpresso55s69_cpu0 (and ns target) names in build commands in
the board documentation. Also, correct the documentation for dual core
images on this part, as it was out of date.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fix board identifier in overlays for the lpcxpresso55s69_cpu0 target.
Board identifiers were renamed with the following command:
for file in $(find . -name "lpcxpresso55s69_cpu0.*"); do;
mv $file ${file/_cpu0/_lpc55s69_cpu0};
done
Additionally, remove lpcxpresso55s69_ns overlay targets where they are
no longer needed (or rename them where they are)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Include soc.h in nxp MRT driver, so that CMSIS register definitions will
be available in this file
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit enhances the accuracy of hardware cycle calculation before
setting the IT8xxx2 event timer. The next target cycle is calculated by
the last, elapsed, and expected timeout ticks. And then, the difference
in hardware cycles between the target cycle and the current cycle is set
into the event timer. This increased accuracy effectively resolves the
clock drift issue.
Tested with:
west build -p always -b it8xxx2_evb tests/kernel/timer/timer_api
-T kernel.timer.tickless
west build -p always -b it8xxx2_evb tests/kernel/timer/timer_behavior
-T kernel.timer.timer
Fixes#67474#67833
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
fwrite parameters are "size_t size" and "size_t nmemb",
when writing a string we should set sizeof(char) and len(string).
The test is doing it wrongly and making the function read more
memory than it should.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Default MAX_DATA_SIZE might be too small depending
on application (e.g. handling the scan result with 12 APs detected)
Added config option for MAX_DATA_SIZE and warning for the user
Signed-off-by: Samy Francelet <samy.francelet@ik.me>
Use the HAL always when setting the TIMERs CC registers,
(also for coded Phy) to ensure things work properly for simulation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* Update the HW models module to
df94612a846b8b1da166d3e4e4273df54de02340
Including the following:
* df94612 GPIO: Add test API to be notified on output changes
* 0da9163 HW models: Use libUtil bs_create_folders_in_path
* c7798a4 CodedPhy: Several fixes and added documentation
* 534c8d4 RADIO: Move CCM decryption trigger to CRCEND
* bde13fc RADIO: Preliminary Coded Phy support
* ff2a79d RADIO: Refactored modulation selection
* f3823e5 RADIO: Fix in Tx packet end time
* d6ebdd9 RADIO: Refactored Address selection
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Using Zephyr SDK 0.16.5, openocd can be used to debug WBA based boards.
Fix documentation and clean up board.cmake configuration for
nucleo_wba52cg from a local configuration which shouldn't have been
upstreamed
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add HCI input parameter validation according to spec for passing
qualification tests.
- Conditional compile of LE Set PA Receive Enable feature
- Store BIGinfo encryption state and number of streams
- Do not report BIGinfo if phy is invalid or unsupported
- Return disallowed ll_read_iso_tx_sync uses sync recever handle
- Validate BIS indices in ll_big_sync_create
Signed-off-by: Morten Priess <mtpr@oticon.com>
Which will replace the old native_sim_64 to align it with
the hwmv2 naming conventions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Which will replace the old native_sim_64 to align it with
the hwmv2 naming conventions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
