Before this commit, cloning a buffer was tested only for a buffer
belonging to a reference counted pool.
By using a buffer from a pool that does not support reference counting,
the added test ensures that the non-ref-counting code path also works.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
If the network interface does not enable IPv4, then it is pointless
to print DHCPv4 information when invoking "iface" shell command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Issue an upstream read transaction through uncached memory to flush
out all pending transactions before power down the host domain.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Trying to enable LTO when CODE_DATA_RELOCATION is already enabled
produces a warning.
This commit prevents twister from building such combinations for
arch.shared_interrupt.lto.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Trying to enable LTO when CODE_DATA_RELOCATION is already enabled
produces a warning.
This commit prevents twister from building such combinations for
kernel.common.lto.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
As per issue #69730, building arch.shared_interrupt.lto and
kernel.common.lto for mimxrt685_evk or mimxrt595_evk/mimxrt595s/cm33 is
currently broken due to their usage of CONFIG_CODE_DATA_RELOCATION.
This commit disables LTO when CODE_DATA_RELOCATION is enabled, allowing
PRs with changes in the kernel code to pass the CI check.
On the down side, builds affected by this change produce a new warning:
> warning: LTO (defined at Kconfig.zephyr:430) was assigned the value
> 'y' but got the value 'n'. Check these unsatisfied dependencies:
> (!CODE_DATA_RELOCATION) (=n)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
There was old code to exit the simulator when there is a fatal
error. This updates the #ifdef and the function name so that
it can be used to exit both QEMU and simulator when a fatal
error occurs. This should help with twister runs as this will
fail immediately instead of having wait for timeout.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The #pragma to ignore array bounds for xtensa_soc_mmu_ranges[]
was a remnant before code refactoring during review. Since
this array is no longer declared __weak and as a zero length
array, the #pragma to ignore array bounds is no longer needed.
So remove them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During early boot in assembly, the function parameter to
z_x86_early_tls_update_gdt() should be the pointer to
the interrupt stack. However, what was passed instead
was the pointer to the x86_cpuboot struct. So fix it to
actually pass the stack pointer (which is stashed inside
the x86_cpuboot struct).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The final ACK check during passive close was wrong - we should not
compare its SEQ number with the ACK number we've sent last, but rather
compare the ACK number it acknowledges matches our current SEQ number on
the connection. This ensures, that the ACK received is really
acknowledging the FIN packet we've sent from our side, and is not just
some earlier retransmission. Currently the latter could be the case, and
we've closed the connection prematurely. In result, when the real "final
ACK" arrived, the TCP stack replied with RST.
Subsequently, we should increment the SEQ number on the connection after
sending FIN packet, so that we are able to identify final ACK correctly,
just as it's done in active close cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Mark pthread_rwlockattr_setpshared() and
pthread_rwlockattr_getpshared() as supported in the POSIX
Options documentation.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Implement pthread_rwlockattr_setpshared() and
pthread_rwlockattr_getpshared().
Both functions are required by the _POSIX_READER_WRITER_LOCKS
Option as detailed in Section E.1 of IEEE-1003.1-2017.
The _POSIX_READER_WRITER_LOCKS Option is required for PSE51,
PSE52, PSE53, and PSE54 conformance, and is otherwise mandatory
for any POSIX conforming system as per Section A.2.1.3 of
IEEE-1003-1.2017.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Move the implementation of the following functions into
the posix library rather than having themn as static
inline functions.
* pthread_rwlockattr_init()
* pthread_rwlockattr_destroy()
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
clock_getres() is required by the POSIX_TIMERS Option Group
as detailed in Section E.1 of IEEE-1003.1-2017.
The POSIX_TIMERS Option Group is required for PSE51, PSE52,
PSE53, and PSE54 conformance, and is otherwise mandatory for
any POSIX conforming system as per Section A.2.1.3 of
IEEE-1003-1.2017.
With this, we have complete support for the POSIX_TIMERS
Option Group.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
tfm_integration samples fail on Windows on mps2_an521 platform,
because output from ninja process running QEMU freezes in re-build
phase.
Fix it by implementing named pipes to read output from QEMU process
directly using os.open and os.read methods.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
k_mem_map additionally allocates two guard pages that are not mapped.
These pages are not being accounted when checking the provided size and
when they are added an overflow can happen and the mapped memory is not
correct.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Dwell time Active or Passive is optional in wifi scan.
If user don't set the Dwell time value, it will be set
as 0. We are adding a range check in scan extensions
for dwell time. So need to set default values.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Add an error log if there's a failure when attempting to load
certificates during socket connect.
Signed-off-by: Noah Pendleton <noah.pendleton@gmail.com>
Document offloaded sockets driver, which is an alternative to Ethernet
driver for networking applications.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Co-authored-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
'native_sim' builds without any issues as part of twister and it also works
when manually setting up Ethernet virtual device (using
tools/net-tools/net-setup.sh).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
'http_get' is one of the few samples that just require connection to
internet (google.com over HTTP or HTTPS) and check if HTTP GET was
successful. Use it for minimal coverage of Native Simulator offloaded
sockets:
* DNS resolving
* basic TCP transfer
* compatibility with Zephyr TLS subsystem (which required some fcntl()
operations)
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far only non-blocking accept() and recvfrom() were suported. This patch
implements blocking behavior, with the use of poll(fd, POLLIN) as helper
mechanism.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use NSI_HW_EVENT() in order to periodically check for events in host
sockets. Whenever there is a socket event ready to be processed by Zephyr,
raise native_sim (newly introduced) CPU interrupt, so that Zephyr driver
can signal readiness with k_poll().
Maintain a list of Zephyr poll() executions in Zephyr context. Iterate
through them whenever there is some event to be processed.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add driver for 'native_sim' target that implements offloaded socket
networking by the use of host networking stack and wrapped BSD sockets API.
This driver has following advantages over existing networking drivers for
emulated platforms that are already in tree:
* no TUN/TAP use means that no additional setup is required on the host
side:
* possible to use it within unpriviledged Docker containers, either for
development or in CI
* possibility to use and test offloaded sockets
(CONFIG_NET_SOCKETS_OFFLOAD=y) with emulated target, which allows
to increase tests coverage of this feature, without requirement of using
hardware
Native Simulator host libc has different error codes than embedded libc
used by Zephyr. Convert between those.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Fixes: #69840
Add CMake configure dependency on the board's board.yml file.
This dependency ensures that CMake will re-run and pickup any changes
to the current board's board.yml file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #69329
The board name was printed as part of printing board qualifiers because
those was being concatenated in the `board_v2_qualifiers()` method.
Keep the qualifiers separated from the board name and let the caller
concatenate the strings when required.
Completion scripts are also updated to handle the corrected behaviour.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The native_{posix,sim}_64 boards are not anymore twister
targets, native_{posix,sim}/native/64 are, and those
default to just use the overlays for the non variant
version.
These 2 overlays were not used by anything.
Remove them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
remove hb_context.status_buffer_size and replace it with
sizeof(hb_context.status_buffer), because hb_context.status_buffer_size
is never set.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Current implementation of mDNS responder does makes it mandatory to have
all the records set at compile time. It is not suited well for applications
that have to publish/unpublish or change records in runtime, e.g. data
received from the network.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Unless `SB_CONF_FILE` is set by the user, an optional `sysbuild.conf`
file is taken by default. If `FILE_SUFFIX=foo` is set, then it should
also be possible to find `sysbuild_foo.conf`, just like with `prj.conf`.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Simplify this sample's recently updated configuration, and ensure that
the file suffix feature works in sysbuild.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
