Add support to coredump_gdbserver.py for running in a pipeline,
communicating through stdin/stdout instead of a socket.
This allows starting it from inside gdb, with:
target remote | coredump_gdbserver.py --pipe <elf_file> <log_file>
Signed-off-by: Kevin ORourke <kevin.orourke@ferroamp.se>
Winodws user may use the `\` as path, but in twister we use the common `/`
as path separated, to avoid the mis-use, convert it to `/` in twister
first normpath, and then replace the os.sep
tested by:
For Linux Like:
west twister -p disco_l475_iot1 -s samples/hello_world/...
For Windows:
west twister -p disco_l475_iot1 -s samples\hello_world\...
fixing: #70310
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Putting a space between and the PR number causes the rendered
text to not link to the issue.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This patch fixes a broken link in the docs for the
nrf9151dk.
It points to the SiP's product page for now.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Previously, XSI_THREADS_EXT included a note about
undefined behaviour. However, the required functions
pthread_attr_getstack(), pthread_attr_setstack(),
pthread_getconcurrency(), and pthread_setconcurrency()
are all conformant.
Remove the unneeded note (all of them)
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
The unittest for cap commander is refactored, so that tests
for volumecontrol is in its own module.
This avoids the problem of having all tests in one huge file.
Due to their small size the tests for registering callbacks and
discovery haven't been put into their own module.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Update Kconfig to improve LVGL Demo performance.
- enable ICache, DCache, and cache management.
- enable Chrom-ART.
- enable double frame buffer and full refresh.
- set bits per pixel to 16.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
This will update host dma copy aligmnet as with current
high value in some cases it was not possible to fully
empty the buffer
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
As stated in "[RFC7959], Section 2.5":
"The Block1 Option provides no way for a single endpoint to perform
multiple concurrently proceeding block-wise request payload transfer
(e.g., PUT or POST) operations to the same resource. Starting a new
block-wise sequence of requests to the same resource (before an old
sequence from the same endpoint was finished) simply overwrites the
context the server may still be keeping."
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
Adds missing sample.yaml file.
Update some sample.yaml to include build_only
Update some sample.yaml for device testing.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The BT subsystem has not been officially qualified for a somewhat long
time now. The code has diverged quite a bit from what it was.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
In preparation of further cleanup commits.
Removes noise in the navigation pane in the rendered docs.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Check max_tx_octects and max_tx_time are in the valid range, according
to the BT Core spec 5.4 [Vol 4, Part E, 7.8.46]
Fix#70472
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
A Kconfig item is added and the buffer
is embedded into the modem_cmux struct.
The default value is increased from 16 to 64 bytes in
an effort to reduce the number of modem_pipe_receive() calls.
CONFIG_MODEM_CHAT_LOG_BUFFER is renamed
to CONFIG_MODEM_CHAT_LOG_BUFFER_SIZE for consistency.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add a configurable delay between when a byte is received and
MODEM_PIPE_EVENT_RECEIVE_READY is sent.
This fixes data reception at baud rates above 460800, and
most likely also reduces the workload at any baud rate
when receiving bytes by not going through the work item
and callbacks for every single byte.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- Set all the state bits before calling uart_rx_enable() because
interrupts may happen already before it returns.
- Fix the byte count in the "Receive buffer overrun" log.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- Add the frame data length to the frame header log.
- Log the dropped frames as well.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The previous default value made UART TXs of size > 1145
time out at a baud rate of 115200.
It should not be so small that it can cause undesirable timeouts.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
MODEM_UBX: Adds Support for UBX Messages in Modem Subsystem.
GNSS API Supported: get_supported_systems, set_fix_rate, get_fix_rate,
set_enabled_systems, get_enabled_systems, set_navigation_mode,
get_navigation_mode.
Boards Tested: MIMXRT1062_FMURT6, VMU_RT1170.
Note: Partial support for U-BLOX Messages is provided as of now.
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
Sphinx reference used cypress instead of infineon. This causes build
warnings, as the same tag is part of boards/cypress/index.rst.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The STTS22H is an ultralow-power, high-accuracy, digital temperature
sensor offering high performance over the entire operating temperature
range. This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/resource/en/datasheet/stts22h.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Commit prevents updating replay protection list on any frame came
from the network layer.
Replay protection cache is updated only if
- transport handles transport command without errors
- access layer handles model message without errors
- transport frame has correct length
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Commit adds analyzing of returned status of element rx.
If at least one element receives multicast message then
access layer will return suceess status.
If option CONFIG_BT_MESH_ACCESS_LAYER_MSG is enabled then
access layer will return success always.
Function bt_mesh_access_recv has been introduced to cover
case when real model statuses should be returned over
oppcode aggregator model despite access returns success.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The nrf5340bsim_nrf5340_cpuapp hwmv1 board name
was replaced with nrf5340bsim/nrf5340/cpuapp in hwmv2.
Let's fix it
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Error check was incorrect, causing wait for complete
not to be done. This can result in emit stop not
working on writes because controller won't do the
stop if it is still busy processing transmit.
Signed-off-by: Mike J. Chen <mjchen@google.com>
Add option to flash board before attach serial.
Current implementation performs the following sequence:
1. Open serial port to listen to board log output
2. Flash device
In case of ESP32 where it uses the same serial port
for both operations, flashing needs to come first.
This PR adds a twister option named --flash-before
which enables the process above, allowing tests to be
performed properly.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add a closing comment to the endif with the configuration
information to which the endif belongs too.
To make the code more clearer if the configs need adaptions.
Signed-off-by: Simon Hein <Shein@baumer.com>
There has been missing line initializing the hold pin,
which caused SPI NOR device init to fail with -ENODEV,
if property defining such pin has been present in device
definition.
Fixes#70661
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As correctly pointed during the initial PR Review, when the MTU-size is
23 the effective payload that can be transferred is MTU-3 = 20. Thus,
this change to be consistent.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add aescolar as collaborator for the C library.
Note that as maintainer of the "native" ports,
I have been taking care of the host C library integration
in Zephyr.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The virtual interface API "input" callback is removed and
its functionality is implemented in "recv" callback.
This change affected the IP tunneling implementation in the
network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The tests are now working as expected after the virtual interface
refactoring which required changes to IP tunneling.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Refactor the IP tunneling support as the input callback was removed
in previous commit. The data will flow through the recv callback now
as expected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The input callback was an unfortunate idea which just complicated
how the packet flows through virtual interfaces so removing it.
The data is passed normally through the recv callback from now on.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use the "remote" sockaddr field for storing the remote
tunnel end point address. This is used also by offloading but
tunneling and offloading are not used at the same time for the
same interface so sharing the variable will not conflict.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
