It is meant specifically for configuration of the PSA crypto library.
The underlying PSA configuration items are guarded by the condition
that a PSA crypto provider must be present, which is the case when
either TF-M is in use or MbedTLS's PSA core is built as part of
the application image.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
This PR adds a sample demonstrating the use of the
State Machine Framework (SMF)
Instructions are in the README.rst for the sample.
Miro Samek was contacted and gave approval to use the state
diagram in this demo.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
The CSI should always propagate the get_fmt request down to the sensor.
It should not return a format by it own unless it contains a test
pattern generator inside it.
The problem with the legacy code is that this code snippet is never
reached if the sensor could return a format. In case the sensor failed
to return a format, these codes are reached but the returned format
makes no sense and its value was not initialized.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The HAS_MCUX_CSI (as well as all the HAS_MCUX_XXX) config was obsolete
and has been replaced by the DT_HAS_NXP_IMX_CSI_ENABLED (i.e.
DT_HAS_XXX_ENABLED). Drop it as well as all the dependencies on it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
When using the CAP initiator shell AC commands, the channel
allocation were not done correctly, leading to cases where
we attempted to set e.g. 2 LEFT streams for the same device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Correction of the reg address of enet2 for nxp_rt1060.
Regression introduced at 537d5c310c
Signed-off-by: Matthias Alleman <matthias.alleman@basalte.be>
- Fixes linkserver runner "west flash --erase" error:
ERRMSG: Exception: Device query can have at most 2 parts (3 found)
- There is no need to specify the core with
the flash erase command line.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
check if top cb is null to avoid hard fault
top cb is allowed to be null in api so this is required
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Used multiple places in the tree. The idea is to determine if this node
corresponds to a specific node (e.g: flexspi) so that specific
configurations can get done. Without the fix, the macro expansions were
defaulting to false.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add option for zperf tcp upload that will enable periodic result reporting.
This is useful for monitoring performance swings during a longer session.
Signed-off-by: Adam Matus <adam.matus@nxp.com>
TCP nodelay option is part of zperf upload params, but was not being
set in common zperf_prepare_upload_sock function. Move it there
to align with how other options are set.
Signed-off-by: Adam Matus <adam.matus@nxp.com>
- modified parameter types to receive a const pointer when a
non-const pointer is not needed
- avoided redundant casts
Signed-off-by: Hess Nathan <nhess@baumer.com>
Fix Twister to generate platform reports (`--platform-reports`)
only once for each platform instead of repeating it multiple times
for each instance executed.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add documentation page for HTTP server functionality.
Rename existing HTTP documentation to HTTP client, as it only covers the
client library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add missing doxygen groups for HTTP service and server APIs.
Improve doxygen API documentation when missing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
JSON support was dropped in the initial server implementation, so remove
a leftover struct representing it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
TLS socket have now been in Zephyr for a few years already and are
widely adopted across the codebase. Given above, they should no longer
be considered an experimental feature.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Commit 149df6b61b ("soc: nordic: nrf54h20: Disable USBHS core cache")
inadvertedly removed default MPU regions defined in arm_mpu_regions.c.
Without the SRAM_0 region defined all builds with asserts enabled result
in failed assertion even before the kernel inits. The failed assertion
is the very last step of arch_kernel_init() when MPU areas are marked
for dynamic regions. Because the failure occurs so early, the device
appears completely dead.
Fix the issue by bringing the default regions to nrf54h20 custom
regions file.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Make `bt_hci_cmd_send_sync` return `-EACCES` when receiving
`BT_HCI_ERR_CMD_DISALLOWED`.
Update some tests that were expecting `-EIO` when
getting `BT_HCI_ERR_CMD_DISALLOWED`.
Add a warning in `set_random_address` when getting that new error. This
is done in case someone try to set a new random address while legacy
advertising, scanning or initiating is enabled. This is illegal behavior
according to the Core Spec (see Vol 4, Part E 7.8.4).
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename struct bt_hci_iso_data_hdr to bt_hci_iso_sdu_hdr, and
struct bt_hci_iso_ts_data_hdr to bt_hci_iso_sdu_ts_hdr.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds flash controller instance for Ambiq Apollo3 Blue SOC
and Apollo3 Blue Plus SOC.
Also create the partitions on this flash controller node for apollo3_evb
and apollo3p_evb.
Signed-off-by: Aaron Ye <aye@ambiq.com>
This commit adapts the Ambiq flash controller to support the Apollo3
SOC (e.g. Apollo3 Blue, Apollo3 Blue Plus).
Also uses the Zephyr common IRQ API to replace the Ambiq HAL ones.
Signed-off-by: Aaron Ye <aye@ambiq.com>
The `cpu.h` is meant to be a hack around Zephyr's dependencies
for unit-test, relocate it to a folder that's included only by
unit-test.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Bug in "enable/disable" argument parsing would cause
the oppostive of the requested setting to get
passed to active discharge API invocation.
Signed-off-by: Mike J. Chen <mjchen@google.com>
Fix SD card pinctrl setup for the VMU RT1170 board. The following
changes were made:
- use the "cd-gpios" property over detecting the card using the
USDHC card detect register. This should be more reliable.
- bias the clk pin high. This matches setup for the RT1170 EVK SD
pinctrl.
- remove the drive strength setting for SD pins to align with the
pinctrl settings for low speed SD mode (50 MHz) on the RT1170 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In ull_disable, it is imperative that the callback is set up before a
second reference counter check, otherwise it may happen that an LLL done
event has already passed when the disable callback and semaphore is
assigned.
This causes the HCI thread to wait until timeout and assert after
ull_ticker_stop_with_mark.
For certain compilers, due to compiler optimizations, it can be seen
from the assembler code that the callback is assigned after the second
reference counter check.
By adding memory barriers, the code correctly reorders code to the
expected sequence.
Signed-off-by: Morten Priess <mtpr@oticon.com>
According to the RFC, MODE_IS_INCLUDE/MODE_IS_EXCLUDE codes should be
used while sendling Multicast Listener Reports in response to a query.
When performing a transition between states (e.g., when joining or
leaving a multicast group) CHANGE_TO_INCLUDE_MODE/CHANGE_TO_EXCLUDE_MODE
have to be used.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
From RFC:
* "source list" is an unordered list of zero or more unicast
addresses from which multicast reception is desired or not desired [...]
It means that there is no need to add any special address to specify
"block all" and "allow all" states explicitly. This commit removes the
unnecessary addition.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
`rtio_sqe_prep_write()` and `rtio_sqe_prep_read()` memset the sqe
struct to zeroes, clearing any configuration previously set. This
commit changes this sequence in the test, such that the sqe's are
prepared, then additional flags/configs applied.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
I got some feedback about confusion as to why the bt_addr types are not
packed. This commit adds a note about it.
This commit also adds a check for the alignof of the structs to verify
the statement 'their members are bytes or byte arrays' to thoroughly
prove that the struct is effectively as-if packed.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Disable the branch coverage calculations on the `LOG_*` family of macros.
Branch misses are due to the implementation of `Z_LOG2` and cannot be
reasonably covered in library code. The internal paths through the
`Z_LOG2` macro are not of interest when inspecting files that happen to
use the Zephyr logging API.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Moves a non-SoC Kconfig to the normal Kconfig file, as this symbol
has nothing to do with the SoC selection itself
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
