Added NXP_FW_LOADER for NXP platforms.
Added NXP_RF_IMU for NXP platforms.
Added MONOLITHIC Flags for NXP platforms.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Add HCI driver generic to NXP platforms.
Update west.yml to have ble support for rw61x
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
If rx buffer allocation has to be deferred to rx_thread, we need to stop
isr reading from mailbox as otherwise rx_thread won't be able to process
other buffers.
Since CMAC2SYS irq is cleared before data is read from mailbox, in case
rx buffer allocation was deferred we also need to trigger irq manually
to make sure all pending data is processed.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
@template@s will be replaced by empty strings and the comment in generated
files will be broken. Replace them with just simple words.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
- Add initial version of CYW920829M2EVK-02 board
- [drivers: clock_control] Make it possible to set up both iho and imo
clocks instead of just one or the other
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Fixes: #70258
Specify NO_CMAKE_PATH to prevent CMake find_program from having a
preference for searching CMAKE_PREFIX_PATH.
Some tool like NixOS / Nix package manager sets this variable
to point inside the nix store, like this:
CMAKE_PREFIX_PATH=/nix/store/gpvnsgf8zhqjjgk63dd...-python3-3.11.6-env
thus causing `find_program()` to prefer this over the tool in the
default path.
Support Nix environments by specifying NO_CMAKE_PATH and in addition
support `VIRTUAL_ENV` environment setting for search path when set by
the virtual environment.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The CMAC uses lp_clk as a sleep clock so it has to be updated if
frequency of lp_clk has changed. This happens either after XTAL32K
settling or RCX calibration.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Refactor the 54L board file to be able to better support out-of-tree
non-secure boards.
This aligns better with nrf53's DT.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add missing nrf overlays to fix the sample at build time.
Copied from samples/drivers/watchdog/boards.
It is not clear why the build failure was not detected earlier.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Pins P0.06 and P0.07 are shorted on nRF5340 DKs prepared for on-target
tests because that is required for UART tests. That causes background
SPIM transfers in this sample to fail because SPIM is not able to drive
its SCK line configured as P0.06. Rearrange then the pins used in this
sample, so that SCK is not on a pin involved in a GPIO loopback.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Chosing by default in the prj.conf
PICOLIBC ensures we also use an embedded
libC even when built for a native target
and even if we dont set POSIX_API.
This ensures the test will build and pass
properly when built with default configuration
from command line without using the test yaml.
This change does not affect the build result
for other targets as those defaulted already
to PICOLIBC.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Note that the Init of the alarm has no need for BCD2BIN conversion,
the LL_RTC_ALMx_Init will do. Add more log debug
The driver must clear the ALARM enable bit before wrting the alarm
registers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Set a Calendar using the LL functions LL_RTC_TIME_Init
and LL_RTC_DATE_Init. Add more DBG info
On the stm32F2 serie, check RS Flag after setting calendar registers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a timeout to the tests/drivers/rtc_api testcase so twister
can end properly when running with twister.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Implement a function bt_audio_get_chan_count that takes an enum
bt_audio_location and returns the number of channels in that value.
This PR fixes#69617
(https://github.com/zephyrproject-rtos/zephyr/issues/69617)
Signed-off-by: Babak Arisian <bbaa@demant.com>
Align grpcio version with logic2-automation package fixing its fail
on Channel.unary_unary() call with missing _registered_method argument..
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Make it a little bit easier to read using already existent
definitions for the registers used here.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Secondary cores are not allowed to be power gated on
runtime-idle. They have to explicitely set off by host command.
Remove this state from secondary CPUs so power management logic
does not need workarounds to enforce this behavior.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In twister, applying quarantine is a part of apply_filters() function.
However, this function is not called when --load-test is used.
Therefore, if one wants to use quarantines in combination with
dynamic scope from the test_plan.py script, one has to pass such
info through the script.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This is a follow-up to commit e53e5448ee.
In the above commit, the calls to `wdt_setup()` were modified to use
the `WDT_OPT_PAUSE_HALTED_BY_DBG` option to prevent problems with
flashing of boards after this test was executed on them (the still
active watchdog could interrupt such flashing), but this option
is not essential to the test itself. And if a watchdog driver does not
support pausing when the CPU is halted by a debugger (this is the case
for example for wdt_counter), it is not able to pass the test because
of that option. Add then the possibility to continue the test when
pausing by debugger is not supported.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Two API calls that are supposed to set up the watchdog are not actually
causing the test to fail, only error messages are printed. This patch
adds the proper return statements.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Installation of single toolchain causes problems for customers who
are not familiar with Zephyr infrastructure. This tip is supposed
to help them.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
When disconnect request is successful, the status
was taking as WIFI_REASON_DISCONN_UNSPECIFIED only.
Adding WIFI_REASON_DISCONN_SUCCESS which can be help
to determine status of disconnect request. If this status
is failed then reason can be useful.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Get the preferred QoS settings via bt_bap_ep_get_info()
Therefore no need to use the internal header file to get it.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/72359
Signed-off-by: Ping Wang <pinw@demant.com>
When function sys_clock_set_timout() is called with small value
(i.e. 1) calculated time to be programmed to TIMER2 reload
register may be such that is expires before code set's it
up. In that case timer interrupt will be scheduled in far
future.
With this change, code checks after it sets reload value if
requested time already passed and if so TIMER2 interrupt
is marked as pending to avoid races.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
With the addition of the STM32 hardware semaphore MBOX driver, this
sample is now supported by the board.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
With the addition of the STM32 hardware semaphore MBOX driver, ICMsg is
now supported on the stm32h747i_disco board.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
