Add checks to make sure that we are not trying to use the socket
service library with eventfd if CONFIG_POSIX_API is not set and if
using native_sim based board. The reason is that we should always
use zephyr libc based eventfd implementation instead of host libc one.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This reverts commit b56297bf16
because it is causing problems when using native_sim and not
having CONFIG_POSIX_API set.
The proper fix is to set CONFIG_POSIX_API when using eventfd
and native_sim so that picolibc is used instead of host libc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
According to RFC3927 and RFC5227, an ARP probe target HW address should
be set to all-zeroes:
"The 'target hardware address' field is ignored and
SHOULD be set to all zeroes."
Hence, we should allow the ARP probes to have all-zeroes target HW
address as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
implement a2dp.c and avdtp.c
add a2dp related Kconfig:
BT_AVDTP_RTP_VERSION, BT_A2DP_SOURCE and BT_A2DP_SINK
a2dp_codec_sbc.c/h are used to provide some APIs to get
A2DP SBC codec information. (like: channel num).
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Introduce `robot` command for running Robot Framework test suites.
Initial implementation consists of one runner dedicated for renode-test,
which is a Renode wrapper for running Robot tests.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Introduce `simulate `command for running samples on a simulator of
choice. Initial implementation consists of one runner, dedicated for
Renode.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Add explicit capabilities to nios2, nsim and openocd runners to prevent
them from having potentially unwanted ones (for example when new
capabilities are added to Zephyr).
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Add capability allowing to suppress the --file parameters that can be
passed to a west command runner.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Initial integration with renode-test was introduced in commit bdf02ff,
which added support for calling the `renode-test` command from both west
and twister.
This commit removes the custom run_renode_test target used for running
Robot tests with the `west build` command and makes twister call
`renode-test` directly instead.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
The notify handle in the BAP broadcast assistant did not handle
conn == NULL properly, and neither did delayed_bap_read_handler.
Add better NULL checks, which also fixes a coverity issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a k_busy_wait to the function tx_stream_disable
to be able to complete the drain of the TX queue before disabling.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Correction of the handling of Tx audio samples via DMA
Signed-off-by: Franck Thebault <franck.thebault@st.com>
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add the function ll_func_i2s_dma_busy to be able to check the
transmission of all the DMA TX packet.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
In dma_stm32_reload, the size is the number of bytes and not number
of elements.
Signed-off-by: Franck Thebault <franck.thebault@st.com>
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
In i2s_stm32_isr, remove the errors from SR register
i2s_stm32_configure, enable the rx path for H7 I2S compatible IP
Signed-off-by: Franck Thebault <franck.thebault@st.com>
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add flag STM32_DMA_16BITS as a combination of
STM32_DMA_PERIPH_16BITS and STM32_DMA_MEM_16BITS
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Test on STM32H573i disco board , only the Tx transfer is ok.
Signed-off-by: Franck Thebault <franck.thebault@st.com>
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
This commit should add all the functionality needed for the DMA
driver to work when PM is enabled.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Increasing the adv latency range to the minimum valid
ReceiveDelay value, 10ms. 4ms might be small for some
target systems.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
On SoC like nrf54h20 GPIOTE channels are split between cores. They
are reserved at compile time in devicetree. We need to ensure that
dynamically allocated channels are used only from pool assigned to
the given core. This is done using NRFX_GPIOTE130_CHANNELS_USED mask
which contains data from the device tree.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Update the Quectel LCX6G device driver to use the modem chat
runtime API to modify the dynamic pair chat script.
This change makes the driver safer and more readible by
ensuring safe modification of the members of the modem chat
structures.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add APIs for changing the contents of modem chat matches
safely at runtime.
This allows for reusing a single modem_chat_match at the cost
of placing the match and its buffers in RAM.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add missing configuration files for the nRF5340DK
and missing configuration values for the unicast
samples w.r.t. buffer sizes and encryption.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
These files are created as a result of local babblesim test runs
and can be safely ignored.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
1. Emit stop when not in the correct state and unsupported ibi type.
2. For IBI(MDB), ignore the callback when target not in the
device tree list.
Signed-off-by: Alvis Sun <yfsun@nuvoton.com>
In release V3.3 new STM32Cube HAL ethernet API was added to STM32 ethernet
driver for STM32F4, STM32F7 and STM32H7 series. At the same time, the
legacy API was deprecated for these series.
I'm now fully removing the legacy API support for these series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Updated function parameters from `const struct uart_stm32_config *config`
to `USART_TypeDef *usart`. This change reduces the level of pointer
indirection, which minimizes repeated dereferencing and helps reduce
the overall code size.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
