- Modify the macro in source code AGT to get the right data from
device tree
- Modify name of agt node
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
uart_irq_tx_complete is implemented by z_uart_async_to_irq_irq_tx_ready
which changed recently (5bd53b6e2) to return positive value that may be
bigger than 1. uart_irq_tx_complete shall not return value bigger
than 1.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Added casts to uint32_t in arch_timing_cycles_get() to handle the
wrap-around of the 32-bit cycle counter correctly.
Signed-off-by: Simon Tomschik <simon.tomschik@askgroup.global>
This is a bug fix for adxl345_accel_convert_q31 functions.
Functions are used to convert samples received from
sensor to q31_t format when RTIO stream is used.
Signed-off-by: Dimitrije Lilic <dimitrije.lilic@orioninc.com>
What is changed?
arch32 related changes in linker script made in commit
ad71901490
are reverted.
Why do we need this change?
The main intention of the previous commit was to fix the
broken ci for aarch64.
There was no issue reported for aarch32 and changes were made for
consistency.
However, it looks like keeping the `__kernel_ram_start`
outside of the bss section works differently for different boards.
For fvp_baser_aemv8r arch32, _bss_start points to _rom_region_end and
__kernel_ram_start points to some region between _rom_region_start and
_rom_region_end which leads to test failure.
While for other board like v2m_musca_b1, _bss_start and
__kernel_ram_start are same.
The linker scripts might need a cleanup to avoid issues because of
these inconsistncies however, till we understand this better,
we need to revert this change.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Commit 52e8b1058c (doc: project: clarify
WG member eligibility) broke the link to the collaborator section by
using nested inline markup, which is currently not supported:
https://docutils.sourceforge.io/FAQ.html#is-nested-inline-markup-possible
As the various workarounds are not recommended by Docutils, this change
simply ends the bold formatting before the link.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The second condition needs to check ARP probes only
The ACD is not properly implemented as described in RFC5227 ch. 2.1.1
The implementation incorrectly detects an IP conflict, if an ARP request
is received for the target IP.
The reason is that the current implementation checks for ARP requests
instead of ARP probes.
Signed-off-by: Andreas Huber <andreas.huber@ch.sauter-bc.com>
_xtos_pso_savearea and _xtos_core_restore_nw have been renamed to
xthal_pso_savearea and xthal_core_restore_nw in recent Xtensa
toolchains. Rename them in reset_vector.S to prevent linker errors
when building Zephyr with Xtensa toolchain.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
uart_poll_out had 1 ms timeout which is too short for lower baudrates.
Increase to 10 ms.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This resolves some addressed comments in this PR
https://github.com/zephyrproject-rtos/zephyr/pull/77930
It adds as well a section in the documentation about some
recommendations to increase ZMS performance.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Cleanup notrun tests with the -M option. This is used in the weekly
build and fails because devices will run out of space.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We no longer render Doxygen content in Sphinx after the removal of
breathe, so let's remove rst related aliases from Doxyfile. Also adjust
some headers that contained rst content.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
It's already mentioned in the board.tmpl template file as well as in
documentation writing guidelines so fix this leftover and make sure
people contributing boards aim for webp format as it helps with file
size while supporting transparency.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Update GDMA and ADC drivers and remove deprecated entries.
- Rebased hal_espressif to latest bump sync.
- Added ESP Timer and Radio common config values
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Make sure all kconfig related to Wi-Fi is
in its driver area.
This commit also removes esp_timer_init() call
from Wi-Fi driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Updates to project configuration extras to build with
Zephyr Controller.
Configure for 2 broadcast audio sources in 2 groups,
2 unicast audio source in 1 group and, 2 audio sinks
for 1 group for both broadcast and unicast usecases.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enabled Periodic Advertising Sync Transfer feature in the
Bluetooth Low Energy HCI Controller samples.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Align Kconfig values used with bt-ll-sw-split Controller as
same used in hci_uart sample.
Relates to commit 2c6306d099 ("Bluetooth: Controller:
BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU")'.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error when BT_CTLR_PRIVACY is disabled. Compile
error seen building hci_uart sample for nrf54l15dk.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the sample so that multiple advertising setup can
be reused in other sample if required. Bluetooth enable can
be in the sample that reuses the advertising setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix buf alloc timeout to 20 millisecond as the sent callback
can have a latency that is upto twice the ISO interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Restrict possible maximum stream synchronization to
implementation defined 2 stream, as structure declarations
in the implementation is limited to 2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect use of BIS indices to dereference the payload
array, instead correctly use synchronised stream indices.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Extended UICR will not be used as its configurations will be merged
with the UICR registers in NVR.
Memory maps changes are needed to align with pre compiled
firmware.
Signed-off-by: Håkon Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
This commit updates the CI workflows to use the CI image v0.27.4, which
includes nrf-regtool v7.0.0.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Files renaming done to better isolate zephyr related
functions from stm32 hal related functions
Signed-off-by: Alessandro Manganaro <alessandro.manganaro@st.com>
