- Driver always initializes the device in the suspended state
- If CONFIG_PM_DEVICE_RUNTIME=n, device PM callback will be called with
RESUME action, thus setting up pins to default state and enabling the
peripheral
NOTE: when CONFIG_PM_DEVICE=n, the pinctrl sleep state will not be
available (-ENOENT) and so never applied, thus avoiding a pin
suspended->active transition.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Some devices, e.g. SoC level devices like I2C peripheral, can never be
powerd off as they are always energized. Such devices can only go from an
active state or to a low power state (suspended). Allow them to simply
return -ENOTSUP when called with TURN_ON (or TURN_OFF).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds custom overlay and config allowing the fs_sample to run on
the stm32f746g_disco with DMA enabled.
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
This enables the usage of DMA for stm32f7x in the sdmmc driver.
Co-authored-by: Maciej Sobkowski <msobkowski@antmicro.com>
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
For DMA channels overridden by HAL DMA, there was no way of
resetting stream busy variable.
Co-authored-by: Maciej Sobkowski <msobkowski@antmicro.com>
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Due to deinitialization not happening, reinitialization
of the disk did not happen as the streams were marked busy.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Reading superblock didn't work with DMAs that only support aligned reads
(e.g. STM32 DMA).
Co-authored-by: Maciej Sobkowski <msobkowski@antmicro.com>
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
This will calibrate the HSI's PLLX clocks if enabled
The value rcc_hsicalibartion_default is 0x40U for h7/h7rs.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Hotfix for two compilation warning issues for
wpa_drv_zep_event_dfs_cac_finished() and
wpa_drv_zep_event_dfs_cac_started(),
and for hmac_prf256() in hostap project.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This allows downstream modules to overwrite the default log level choice
using Kconfig.defconfig files.
For example, this becomes possible:
```
choice LWM2M_LOG_LEVEL_CHOICE
default LWM2M_LOG_LEVEL_WRN
endchoice
```
In contrast to the configuration method, this then has an effect on all
applications stored in the downstream module.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The kscan input callback does not use an instance specific name, so we
can only ever have one instance of this type.
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
Using INPUT_CALLBACK_DEFINE_NAMED would not add the _input_callback__
prefix to the given callback name. This can result in namespace clashes.
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
The LVGL input callback does not use an instance specific name, so we
can only ever have one instance of this type. This issue was evident by
a build error, e.g., when using "zephyr,lvgl-keypad-input" nodes twice:
error: redefinition of '_input_callback__lvgl_keypad_process_event'
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
There's no reason to send these async, and since the reply isn't waited for
anywhere, this can cause the HCI buffer pool to be exhausted and
`bt_enable()` to fail.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
frdm_mcxc242 board does not have adc configured and enabled. Configure
and enable it. Update documentation.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Since UDC buffers are allocated with `UDC_BUF_GRANULARITY` granularity,
the `net_buf_tailroom` may no longer be equal to the HID report size.
Use `setup->wLength` instead to ensure that proper HID report size is
passed to the application's callback.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
This pulls in PRF-256 wrapper API based on PSA APIs. This implements
PRF-256 as per section 11.6.1.7.2 in 802.11ac using PSA APIs.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
This commit updates revision of hal_nordic to bring the latest changes
in the nRF IEEE 802.15.4 driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
- Exclude `app.overlay` from DTC_OVERLAY_FILES in
`drivers.gpio.build.adc_ads1145s0x_gpio` tests to avoid duplicate builds.
- Modified so that adc_ads1145s0x_gpio.overlay can be tested alone.
- Delete the conffile and move its contents to extra_configs.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Since the log module entity is not defined anywhere,
LOG_MODULE_REGISTER should be used here instead of LOG_MODULE_DECLARE.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
A null check for the TCP connection `conn` was added at the start of
the function, but the previous checks were not removed, leading to
a redundant null check, which is unnecessary.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add support for BeaglePlay, a TI AM6254 SoC based development board with a
CC1352P7 wireless microcontroller for supporting software defined 2.4GHz
and SubGHz wireless protocols. Support for running Zephyr on the
quad-A53 SoC or the programmable M4 on the SoC would be provided
separately.
See https://beagleplay.org for details.
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
The fix 25173f71cd created
`struct pm_device_base` and moved `usage` to it.
This has been overlooked so that I fixed it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This commit makes the rom_start relocation introduced in
commit 8ef8e8b497 available for Cortex-A/R CPUs.
Signed-off-by: Simon Maurer <mail@maurer.systems>
Add timers that have been enabled to board doc table
Add timers that have been enabled to board twister yaml
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add nodes for LPTMR. This is sufficient to enable their use as counter
devices when set to status okay.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add DT node and clocking of TPM peripherals, which are used for PWM.
Also change the soc clock enable code to not use preprocessor
conditionals.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add peripheral bridge definitions to DT, this also fixes the base
address of the GPIO peripherals which were faulting in the driver due to
the wrong reg address.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Base enablement of MCXW merged while z_arm_platform_init was being
deprecated, resulting situation is now that no platform init is
happening, fix by converting to use soc_reset_hook.
Also fix a comment that said the core was being set to 40 MHz, when it
is actually being set up to 96 MHz.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Some LLEXT objects can include sections, that should not be merged
with other sections of the same type. E.g. when such sections should
be placed into locations, other than the default. Add support for
such sections.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
To simplify LLEXT loader parameter extension pass the whole
struct llext_load_param to final consumers instead of extracting
individual fields from it in the caller function.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When building LLEXT for Xtensa with custom sections the compiler
can leave unresolved references in them. Then this has to be done by
the LLEXT core during linking. This commit adds linking support for
the L32R Xtensa instruction.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
