NXP released the linkserver update 1.3.15, which corrects an issue
with logging that by default went out to stderr when flashing.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Set the backend's context to its control block's context
instead of NULL when doing `log_backend_enable`, as the log
backend UART uses that later.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
This fixes multiple CI issues for the ads1145s0x
driver.
Having a special testcase for the driver limits the
CONFIG_ADC=y and CONFIG_ADC_INIT_PRIORITY adjustment
requirements.
Also fixes address not matching warning for pcal6416a@2
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Affected CONFIG_ADC_ADS114S0X_GPIO=y build.
register_addresses was wrong type for
ads114s0x_write_multiple_registers()
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Core objects version reporting was broken for LwM2M version 1.1, as the
default object version not necessarily matches the LwM2M version.
Therefore, implement a table with default object versions for particular
LwM2M version, which can be looked up when determining whether it's
needed to include object version or not during Registration/Discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move all the generic code from the Nuvoton NPCX keyboard scanning driver
into input_kbd_matrix.c. While doing that convert few configs into
devicetree properties and tweak few other things to enable the generic
code to support multiple instances.
This is limited to 8 rows for now, and that's fine for all the current
in-tree drivers, the limit could be removed down the road but this
should be fine for now, added few generic build checks to make sure a
driver does not go over the limit, as well and some more implementation
specific checks.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This adds tests for automatic security elevation and retry on security
errors. This includes two tests:
1. where the security is elevated by the central
2. the security is elevated by security request, so pairing is already
in progress.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
If the conn security elevation is already in progress, retry the ATT
request if failed due to security reasons.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Queue characters in TX ring buffer regardless of interface state. This
allows simple applications that print basic output to CDC ACM port to
not care about connection or DTR state. Note that depending on actual
application requirements it might be still wise to wait for DTR before
trying to send data.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Explain the root cause behind garbage characters received in shell
applications, what Zephyr does to mitigate the issue and what is
expected from host userspace applications.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Prevent ECHO on Linux by arming IN endpoint with ZLP when interface is
configured and making sure that actual payload is only sent after
initialization timeout. The ZLP is not visible to host side applications
because the applications are really accessing tty buffer and received
ZLP does not modify tty buffer in any way.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
For example, if a driver needed to reserve address before it does a
ENTDAA, it would need to get free address in a loop, but the get
free address func would return the same address everytime. It needs
the start address, which would be the last free address it go, to
be passed in to get the next free address.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
when load test plan it is possible the plan is built in another os
so the case key would be
'samples/hello_world/samples.baseic.hello_world'
but the testsuite is scaned in current os may in window
and the key is like
'samples\\hello_world\\samples.baseic.hello_world'
so update the uniq path with only backslash in path
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add set functions for codec capability, to set all
assigned number values in the bt_audio_codec_cap
struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update codec capabiliy frequency, frame duration and
channel count to use enums, and add additional
documentation and missing values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a new function, ltv_set_val, that did most of the
data manipulation from codec_cfg_set_val, so that we can
reuse that code for the codec cap and codec meta
functions as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable NXP FlexRAM in DTS and SOC code.
Do not configure flexram at runtime if the code is in the RAM.
Fix RT1060 DT to be more accurate.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Enable the gpio0 node and mux the heartbeat LED. Moreover, add the
heartbeart LED as LED node and create an alias with 'led0'.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The M4F subsystem has a dedicated GPIO controller with 24 available
pins. Add the node definition for the recently added driver.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Add pinctrl to the Davinci GPIO driver to allow muxing pins dirctly
in this driver.
Also aligned the macro backslashes as line continuation character at
the end of each line with each at the same position and removed the
GPIO_DAVINCI_DEVICE_INIT macro which seems to be not used.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Other drivers like the pinctrl_ti_k3 rely on a fully initialized system.
Move the am62x_init to an earlier stage than PRE_KERNEL_1 to keep both
PRE_KERNEL_{1,2} free for drivers.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Removed the tests for invalid bt_bap_broadcast_source_get_base
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the tests for invalid bt_bap_broadcast_source_get_id
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit eb44414af9 modified
test_single_read for early rx buf release.
The commit assumed that tdata.last_rx_buf points to either &tdata.rx_buf[0]
if the driver releases the first buffer or at &rx_buf[5] if the first
buffer is not released. However, where tdata.last_rx_buf points to depends
on the timeout given to uart_rx_enable(), making the test flaky.
This commit modifies the test by keeping track how many bytes have been
received in the first and second buffers.
The function tdata_check_recv_buffer() validates that the sent data
matches the received bytes which may have been split between first and
second buffer.
This fixes the uart_async_api test on the xmc45_relax_kit.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
This allows defining a list within two marker (zephyr-keep-sorted-start
and zephyr-keep-sorted-stop), and have the CI validate that the block is
kept sorted every time stuff gets added to it.
This is mainly for Kconfig and CMake include lists so that there's no
ambiguity on where to add new stuff.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Sort the Kconfig and CMakeLists include blocks again, and mark the start
and end of the blocks so that the CI can keep them sorted.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
- Make caparray delta a Kconfig variable
- Set caparray delta for beagle_bcf at beagleconnect_freedom_defconfig
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
- Add support cc1352p7 used by beagleconnect_freedom
- Since this is a multi interface device, auto config does not work.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Some platforms prefix extra logging information before the standard
[] blocks so I've added `.\*` to the regex. Also, removed the static
values so they're only referenced using 'self.' and stopped parsing
lines after the FINISHED_PATTERN is matched since some versions of
gTest also print out a test summary after and it's not useful for
the processing.
Signed-off-by: Yuval Peress <peress@google.com>
DW watchdog driver is not used on ACE,
Intel ADSP watchdog driver will be used in DTS when ready to use
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Having a % FIFO watermark isn't very useful as it doesn't convey how long
the SoC can sleep (or do other work) while batching sensor data. Convert
the attribute to a batch duration using ticks. Currently the ticks are
in system ticks, but eventually when an external clock is attached to
the sensor it will be in the external clock's ticks.
Signed-off-by: Yuval Peress <peress@google.com>
Add streaming implementation for icm42688 using both threshold and
full FIFO triggers.
Signed-off-by: Yuval Peress <peress@google.com>
topic#sensor_stream
Introduce a streaming API that uses the same data path as the async API.
This includes features to the decoder:
* Checking if triggers are present
Adding streaming features built ontop of existing triggers:
* Adding 3 operations to be done on a trigger
* include - include the data with the trigger information
* nop - do nothing
* drop - drop the data (flush)
* Add a new sensor_stream() API to mirror sensor_read() but add an
optional handler to be able to cancel the stream.
Signed-off-by: Yuval Peress <peress@google.com>
topic#sensor_stream
Convert the ITE keyboard scanning driver from kscan to input, add the
corresponding kscan compatibility node to the current board, build test
only.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
