As display stuffs have been moved to a shield, the display chosen node
must be removed as well as chosen node requires the node to be enabled.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
DMM stands for Device Memory Management and its role is to streamline
the process of allocating DMA buffer in correct memory region
and managing the data cache.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Reduce RAM disk size from 192 sectors down to 1 sector to solve linking
issue due to qemu_cortex_m3 target having too little RAM. The RAM disk
size does not really matter in this test case and should be as small as
possible.
Enable test random generator to solve missing sys_rand_get() required by
networking subsystem.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Fix regression due to use of HAL_RADIO_TMR_START_DELAY_US
introduced in commit 11bae5cfa9 ("Bluetooth: Controller:
Fix missing radio timer comp and range delay").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
set DT node as Okay in board device tree;
add board level's d-cal, txcal45dp and txcal45dm to usbphy node;
enable usb clock; set USB_STACK_USE_DEDICATED_RAM for lpc55s69 and rt685;
load usb.ld for lpc55s69 and rt685.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
udc_mcux_ehci is based on the MCUX USB controller driver
(usb_device_ehci.c); udc_mcux_ip3511 is based on the
MCUX USB controller driver (usb_device_lpcip3511.c);
add related Kconfig and CMake; include the usb_phy.h path in
modules/hal_nxp/usb/CMakeLists.txt because udc_mcux.c use it;
add related macros to usb_device_config.h;
update CMakeLists for udc_mcux_ehci and udc_mcux_ip3511.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
define usbphy in DT and controller DT node ref to usbphy node.
define the usbphy yaml and update ehci and ip3511 yaml for usbphy.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Ensure --target and -mcpu/-mfpu/-mtune are set appropriately when building
with clang targeting arm64/aarch64.
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
- Unify shell backends in a dedicated section.
- Add documentation for the following backends: USB, BLE, RTT.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add the CAP initiator and acceptor samples to the files
for Bluetooth Audio.
This will also automatically support a future
CAP Commander sample.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds babblesim tests of the CAP Acceptor and the CAP Initiator
samples for unicast.
This simply checks if at least one stream is connected
and is sending (empty) data.
This modifies the samples to send data as well as counting the
receive ISO data packets.
Ideally the TX would be superflous to verify that ISO is working,
but a missing feature in the Zephyr LL makes it a requirement.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a CAP acceptor unicast sample that simply
uses the CAP acceptor implementation to setup
streams with a CAP initiator.
To keep it simple no audio or encoding support
has been added.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a CAP initiator unicast sample that simply
uses the CAP initiator unicast API to setup
streams with a CAP acceptor.
To keep it simple no audio or encoding support
has been added.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The current implementation of the BAP Broadcast Assistant only supports a
single connection. This PR makes broadcast assistant support multiple BAP
scan delegators.
Fixes: #67523
Signed-off-by: Ping Wang <pinw@demant.com>
Fixes an issue whereby the domains file in sysbuild projects
would be loaded and used with outdated information if sysbuild
configuration was changed then west flash was ran directly after
it
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add board support for the ADI AD-APARD32690-SL. The platform is based on
a MAX32690 microcontroller, it has an Arduino-Mega compatible header and
2 PMOD connectors. Also, a 10 Mbps single-pair Ethernet link is enabled
by using the ADIN1110 10BASE-T1L MAC/PHY.
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
The uart-controller devicetree binding declares current-speed and
data-bits properties as optional, but the max32 uart driver failed to
build if they weren't defined. Fix the driver by falling back to
commonly used values for these properties.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Let's filter out escape sequences from the tests
output (for ex. color escapes) as those corrupt
the xml.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Also run the multiple_id test on the nrf54l15bsim target
to validate the controller when running on this
platform which has both a different RADIO and other
peripherals.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's merge the results and publish them as in the
twister workflow.
It is nicer to not select files by hand and produces
a nicer report.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Move the shell script filter to a single place,
and ignore also files starting with "ci."
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The gpio pin that will be used as a source for PWR wake-up pins does not
actually need to be configured as input, hence input_gpio_keys driver does
not need to be involved. As far as GPIO controller is concerned, the pin
can be in analog state.
Also, it's clearer & safer to call gpio_pin_configure_dt directly in the
application with the STM32_GPIO_WKUP flag, just before calling Poweroff,
instead of relying on a driver, like input_gpio_keys to do it just after
boot behind the scenes, & risk not having the correct wake-up pins config
when Poweroff is finally called.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
Sysbuild sets the EXTRA_CONF_FILE before loading kconfig.cmake.
This hides any user defined EXTRA_CONF_FILE added to the sysbuild cache.
Clear the local sysbuild EXTRA_CONF_FILE so that the hidden cache
variable re-enters current scope.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
In case no Renewal/Rebinding times have been provided the server via
DHCP options, we should reset their values on ACK, so that the client
can recalculate the defaults. This is important, as the lease time may
change, so we should recalculate default T1/T2 timeout based on the new
lease time value.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
DHCP Request retransmission in RENEW and REBIND states was not
compliant with RFC2131.
The retransmission interval should not be calculated as in REQUESTING
state in such case, but rather calculated based on the remaining T2
or lease time (depending on current state).
RFC doesn't also mention any retransmission count limit for those
states. The client should retransmit the REQUEST until T2 or lease
expiry time are reached.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Trying to start a chat script using either modem_chat_run_script()
or modem_chat_run_script_async() should result in returning -EBUSY
without affecting the currently running script and thread waiting
on the current script to stop.
The current behavior causes the thread waiting for the current
script to stop to return with error -EAGAIN, and the thread trying
to start the new script to return with error -EBUSY.
This commit moves the reset of the sem the current thread is
waiting on, to after the check of whether a script is currently
running, leaving the current thread unaffected as is intended.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Move it out of boot section because it's also called by none-boot function
'loapic_resume()' at runtime. Better to keep boot-only things in boot
section to avoid paging in boot section things at runtime.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
bt_audio_codec_cfg_get_chan_allocation() now takes an
extra parameter.
Let's set it to the value which keeps the old behaviour.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
PR #72571 added fallback functions to BT audio, but not all bsim
tests were properly updated to use new functions signatures. This
commit fixes a remaining error with the same pattern as the
original PR did for "bap_broadcast_sink_test.c".
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Do not run the samples/drivers/flash_shell application on the
stm32h745i_disco//m4 as the flash controller is not supported yet
on the M4 core (only M7). Just like the nucleo stm32h745//m4
is excluded.
Also exclude stm32h7rs disco at the moment (still TODO).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The HCI command LE Read Supported States command returns
if the controller supports running the scanner and initiator
roles in parallel.
This commit utilizes this information in the host:
- It does not prevent initiating a connection when the scanner is
running
- It does not prevent the host from restarting the background
scanner when there the host wants to auto-initiate a connection.
- It does not stop the scanner when the host wants to auto-initiate
a connection.
To support this feature, the scanner and initiator
always have to use the same address.
This because the HCI command LE Set Random Address
cannot be issued after the initiator or scanner has started.
1. When privacy is disabled, the scanner has to use its identity
address to ensure it uses the same address as the initiator.
2. Only one identity is supported.
To simplify the implementation, it is a requirement to use
extended advertising commands to avoid interfering with
the random address used by the advertiser(s).
Also, it is a requirement to never use time-limited scanning,
as RPA this feature does not work when privacy is being used.
See https://github.com/zephyrproject-rtos/zephyr/issues/73634.
The changes in this commit will be tested out of tree as the
Zephyr Bluetooth Controller does not support this functionality.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
