Add notes for Nordic HAL and a few more entries for I2S and PWM drivers,
as well as for Nordic SoCs and boards.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add Infineon CYW20829 SoC and board information to release notes for
Zephry 3.7.
Signed-off-by: Fyall Ian (CSS ICW SW MTO INT) <ian.fyall@infineon.com>
There is one externally visible change which affects
the process of booting the audio DSP from the host,
where dedicated registers are now used to communicate
the boot status instead of using arbitrary memory
locations. This affects the ACE family of audio DSP.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The declaration of statically allocation stacks have been
updated to use another macro, which also unifies both
single stack declaration and array stack declaration.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds some bits on demand paging and eviction algorithm as
the logic of NRU has changed, and LRU introduced.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Docs now start at a high level, discussing sensors, attributes,
channels, and reading data from them.
Followed by more detailed usage guides in how to solve common problems
sensor users may run into.
Additionally renames the sensor_api sphinx tag to sensor
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
It's more than just an API doc and the label was longer than needed,
shorten to rtio as a doc label.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The source files required for this features are not present
in the tree for this SOC.
So if CONFIG_PM or CONFIG_POWEROFF are enabled, there would
be a cmake failure.
Let's just indicate these features are not supported in
kconfig.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Since the kconfig preprocessor functions are under the devicetree
maintainance area, the documentation for them probably should be too.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Adds release notes for notable changes and new sensor drivers introduced
since the last release. Organizes changes by sensor vendor to reflect
similar changes made in the tree.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Apple has released other processors, e.g. M2 or M3, so Apple Silicon is no
longer a synonym of M1.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Make it depend on MBEDTLS_PSA_P256M_DRIVER_ENABLED instead of
selecting it.
This fixes the build of
tests/crypto/secp256r1/crypto.secp256r1.p256-m_raw on filtered-out
platforms since PR #75441 (83cd9f5a01).
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
As the items come from the memory slab, their initialization state
can't be guaranteed. This is causing some devices triggering an assert
in p4wq where the item's thread is not null (not zero).
Signed-off-by: Luis Ubieda <luisf@croxel.com>
`struct acl_data` is used even when Host flow control is not enabled.
It is written to through the `acl(buf)` accessor in `conn.c:hci_acl()`.
Hopefully no netbufs were harmed by that :/
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This removes the TF-M CMake warning "Actual TF-M version is not
available from Git repository. Settled to v2.1.0" which always
got triggered because Zephyr's TF-M repo does not have the upstream
Git tags.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add a sample that can test various TF-M build options. For now we only
test `CONFIG_TFM_BL2=n` and `CONFIG_TFM_MCUBOOT_IMAGE_NUMBER=1`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Fix builds with `CONFIG_TFM_MCUBOOT_IMAGE_NUMBER=1`. The merged binary
should be signed with the same argumements as a secure build, not a
non-secure build, except with a different layout file generated by the
TF-M build system.
Fixes#68345.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Currently, the NFCT pins cannot be used as GPIOs on the nRF54L15 MCU
because the Nordic HAL for this MCU uses the new upcoming `NRF_CONFIG_`
style configuration settings for this MCU.
To support all nRF5x MCUs, the old configuration is still required
because Nordic didn't update their MDK entirely to the new style.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
Since the introduction of HWMv2, boards can have multi-arch SoCs (e.g.
nRF54), so changes to these kind of boards do not have a clear place
now. Simply group all of them together.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Doing duplicates count of bugs, a PR fixing a bug is not a bug report.
Many PRs fixing an open bug are labeled with 'bug' and thuse are being
counted twice.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Current if CONFIG_XIP is enabled, then ALIGN_WITH_INPUT and the align
argument to SECTION_DATA_PROLOGUE are set together, and that is not a
valid option combination; if ALIGN_WITH_INPUT is present, then the
section's LMA alignment is inherited from the previous section, and that
cannot be combined with another alignment option.
The background for this line is in the following commit:
6b3c5e8bb2
Additionally, this is the documentation from ld:
(from https://sourceware.org/binutils/docs/ld/Forced-Output-Alignment.html)
> 3.6.8.3 Forced Output Alignment
>
> You can increase an output section’s alignment by using ALIGN. As an
> alternative you can enforce that the difference between the VMA and
> LMA remains intact throughout this output section with the
> ALIGN_WITH_INPUT attribute.
Signed-off-by: Tavish Naruka <t-naruka@ispace-inc.com>
RISC-V trap entry is handled in soc/common/riscv-privileged/vector.S.
Remove the redundant modification in CLIC driver.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
CLIC should be the first level interrupt controller because it replaces
the basic RISC-V local interrupt.
The interrupt level in CLIC controls preemption between IRQs, rather than
specifying the number of nested interrupt controllers.
Removed CONFIG_MULTI_LEVEL_INTERRUPTS and the incorrect interrupt level.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
A patch was added to the voltage divider to handle an erroneous
negative voltage reading for the nrfx_saadc which could return
negative voltages even though the ADC mode was single ended.
This has now been patched in the ADC driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
