Initialize TCM and SRAM contents only after a destructive reset (e.g.
PoR reset). SRAM retains content during functional reset through a
hardware mechanism, therefore accesses do not cause content
corruption errors.
Fixes#75912
Signed-off-by: Manuel Argüelles <marguelles.dev@gmail.com>
(cherry picked from commit ec7289039b)
According to the riscv's `arch.h`:
+------------+ <- thread.arch.priv_stack_start
| Guard | } Z_RISCV_STACK_GUARD_SIZE
+------------+
| Priv Stack | } CONFIG_PRIVILEGED_STACK_SIZE
+------------+ <- thread.arch.priv_stack_start +
CONFIG_PRIVILEGED_STACK_SIZE +
Z_RISCV_STACK_GUARD_SIZE
The start of the privilege stack should be:
`thread.arch.priv_stack_start + Z_RISCV_STACK_GUARD_SIZE`
Instead of
`thread.arch.priv_stack_start - CONFIG_PRIVILEGED_STACK_SIZE`
For the `end`, use the same equation of `top_of_priv_stack` in
the `arch_user_mode_enter()`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
(cherry picked from commit 7db18ab721)
disco l475 board exposes I2C3 on standard Arduino Uno pins A4/A5,
not I2C1.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
(cherry picked from commit 0f05f58bf5)
Remove working draft status from the v3.7.0 release notes and migration
guide.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds v3.7.0 to the list of supported releases.
The EOL data is currently set as 2.5 years after release
which is the minimum support period we claim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
ac52bd629d removed from the
tree some kconfig options which weren't there for a full release.
Let's also not mention them in the release notes so we avoid
broken links.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix a few typos, minor grammar mistakes and simplify grammar
in a couple of sentences.
Also fix indentation in one list.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
No significant changes to 1-Wire master drivers for the 3.7 release.
Only the changes in the pull-up configuration of the zephyr,w1-gpio
driver added in the migration guide.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
As of v2.1.0 TF-M has updated to CMSIS v6 and switched from hosting
the sources to depending on the upstream repository, cloning it at
build time.
To prevent a download from happening during the build, CMSIS v6 sources
are pushed to Zephyr's fork of TF-M and the `CMSIS_PATH` CMake variable
is set to point to them.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
These were copied-over from cdc-acm-console by mistake. It's not valid
for this snippet, therefore it's being removed.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add information support for BR key traversal by bt_foreach_bond.
Add information support for NXP IW612.
Change "Added support for NXP platforms." to
"Added support for NXP RW61x.".
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Some HCI drivers issue HCI reset when disabling, like the IPC HCI
driver. We need to keep the RX thread running to allow receiving
the command complete.
This commit postpones aborting the RX thread until this is done.
The issue happens started occuring after commit
d0e75ab87c4b53d66008c941c38709a2fca9dbea.
Fixes#76202.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Added Isochronous channels to the controller
Moved Isochronous channels from LE Audio to the host
Changed the LE Audio to refer to the page where
the feature is more detailed described.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For some reason, when the "Supported" coumn of the posix option
documentation included large strings, it would distort the size
of the entire table.
Move blurbs about undefined behaviour and failing with ENOSYS
to a paragraph above the table, so that all tables have a
homogeneous size.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Reorder posix options and option groups so that they are
in alphabetical order in the documentation.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Make sure all added (and removed) HCI drivers are mentioned, and also
provide a reference to the new HCI driver API.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
With the new Bluetooth Qualification process the QDID and link to
launchstudio are outdated, remove them.
Also remove the ICS listing as it hasn't been updated for a while.
Instead add a download link to the Zephyr Bluetooth Host ICS file.
Update the documentation configuration script to include the ICS file
(`*.pts`) in the external contents.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
PM_DEVICE_RUNTIME_EXCLUSIVE was deprecated and its behavior
is achived with PM_DEVICE_SYSTEM_MANAGED=n.
Fixes#76037
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Using < > in the kconfig:option role was causing the <_board> section
to be omitted from the rendered docs, and using the role was useless
anyway as the option name was not a real one.
Use the fancy :samp: role instead to achieve the same goal.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added links to relevant doc pages when appropriate
Added a mention about PTP
Added a mention about PSA Crypto
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Cleaned up migration guide, mostly fixing single quotes being used
instead of double quotes plus some other minor spelling mistakes.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix indendtation in posix deprecations.
The top-level bullet was indented by an extra space, so remove
the space.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This patch fixes two broken links in the LED strip release note.
:kconfig:option: cannot be used with removed Kconfig options. This
results in broken links. Let's use the code's inline markup delimiter
instead.
It also adds a missing link to the DT compatible of the IS31FL3194
controller.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
