Change the integration target to something more meaningfull,
i.e. something users are more likely want to try it on,
and therefore in which it is better to do more testing.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the qemu targets for the controller configuration.
As those do not support the controller, it is just meaningless.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide configuration for native_sim instead of native_posix
and enable it in the samples.yaml
native_posix is being deprecated in favour of native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a test based on the unicase client/server samples
which runs them together and after waiting for a predefined
amount of time, checks how many audio packets has the
client received, and if over a threshold, passes the test.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Due to this bug:
https://github.com/zephyrproject-rtos/zephyr/issues/64574
We need to increase the number of L2CAP Tx Buffers
so this sample can be used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a configuration for the sample we can use
by default with the ISO capable hci_rpmsg controller
sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for the simulated nrf5340 and nrf52 in these samples.
And enable building in twister both for these and for the
already supported nrf5340dk.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Maxim MAX20335 is a PMIC with Ultra-Low IQ Voltage Regulators and
Battery Chargers for Small Lithium Ion Systems.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Tomasz is actively involved in Zephyr's ACPI support, so add him as a
collaborator to the subsystem.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
axp192 is used by the display controller and gpio hog subsys
thus we need to set this priority to the smaller value.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Add basic ACPI test application. Initially there are only tests for one
ACPI table (MCFG) and fetching the ACPI PRT, but this is already a good
start for caching regressions on the supported boards.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This test assumes it can use all configured
NRF_RTC_TIMER_USER_CHAN_COUNT,
But the sync RTC code uses one while it synchronizes.
Let's just disable it the sync rtc.
This fixes an issue where the test fails for a simulated
nrf5340.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The workqueue test may intermittently fail, with errors such as:
work_1cpu_test_1cpu_system_schedule: (elapsed_ms <= max_ms is false)
long 102 > 101
Disabling PM makes the issues go away, and it is what this patch does.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Instead of those set, use the default ones
for the MFD/REGULATOR_AXP192_INIT_PRIORITY/GPIO_AXP192_INIT_PRIORITY
that are set to the 80/86/81 values correctly. Adjust the
GPIO_HOGS_INIT_PRIORITY only to be executed after GPIO driver.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Save secondary dsp context when it is powered off in idle thread
and restore it when the secondary dsp is powered up. The algorithm
is aligned with ace platform.
Tested on a tgl platform.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Improves the documentation about how CDP 128, 129 and 130, as well as
Models Metadata Page 128 are created, as well as which functions the
application will have to call to store the correct contents in the
pages.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
Adds a note that an additional Kconfig needs to be selected if a
serial MCUmgr transport is used
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Settings which defaults to `y` but is architecture related should have
a arch dependency for safety reasons.
Thefore add `if SPARC` to the SPARC_CASA Kconfig to ensure this setting
is only enabled on the sparc arch.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fix a bug on cavs platform that secondary core is not powered off
by SET_DX ipc message sometimes. Secondary core is set into idle
state when switching to SOF_OFF state and then halted by primary
core. The interrupt is enabled before entring idle state, so the
secondary core may be woken up by interrupt and soc_cpus_active
is set to true before it is halted by hardware power gating. This
result to error when SOF check soc_cpus_active after the secondary
is halted.
This patch doesn't enable interrupt before idle entry to avoid above issue.
Signed-off-by: Rander Wang <rander.wang@intel.com>
When both the memory base address & its size are zero, the
assertions test will be comparing an unsigned int against zero
which result in compilation warning, and will be raised to
error in Twister
Fix them with more conditional compilations.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Fix build for IMXRT11xx SOCs. The ARM MPU header was missing for the CM4
board overlays, add the required header so the sample can build.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Locate common mpu code together with other arm / nxp mpu code in the
arch folder where it logically belongs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The pca9685 driver assumes the chip will be in "restart" mode
after putting it to sleep. This is not necessarily the case, which
can cause setting the prescaler to fail.
This fix allows the precaler to always be set and only restart the pwm's
when the chip was actually in restart mode after being put to sleep.
Signed-off-by: Jaap Versteegh <j.r.versteegh@gmail.com>
Fix MCUBoot error for LPC55S69 "slots are not compatible".
Use the standard slot naming,
used by TFM-enabled Zephyr platforms.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Added chat script and initial config to support Telit ME910G1.
Needed to edit power_pulse pin timing in accordance to datasheet.
Signed-off-by: Jeff Welder <Jeff.Welder@ellenbytech.com>
This is a partial revert of one-line from commit 06cfbd4159 ("drivers:
power_domain: Introduce a gpio monitor driver") which not just
introduced a new driver (no problem with that) but also changed the
initialization priority of another, unrelated and existing power domain
driver without even trying to compile it:
https://github.com/zephyrproject-rtos/zephyr/pull/61166#issuecomment-1780959157
```
west config manifest.project-filter -- +sof
west update
west build -b intel_adsp_ace20_lnl modules/audio/sof/app/
ERROR: /soc/ssp@28100 POST_KERNEL 43 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@29100 POST_KERNEL 44 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2a100 POST_KERNEL 45 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2b100 POST_KERNEL 46 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2c100 POST_KERNEL 47 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2d100 POST_KERNEL 48 < /soc/dfpmccu@71b00/io0_domain 51
```
Also note a reviewer (@ceolin) expressed concerns about this unrelated
change but it was ignored:
https://github.com/zephyrproject-rtos/zephyr/pull/61166#discussion_r1357908984
Using `CONFIG_KERNEL_INIT_PRIORITY_DEFAULT` here may be "bad" for some
reason(s) and maybe it should be changed in the future, but it's nothing
compared to breaking _compilation_ of code that has been validated for
months and been released in production
(https://github.com/thesofproject/sof-bin/releases/tag/v2023.09)
So the very urgent thing is to very quickly revert to the previous state
to unblock development. Then we can discuss what is the better thing to
do here.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Portfolio object created string buffers for Identity resources
that was overlapping on some cases.
Don't calculate pointers by hand, allow compiler to calculate it.
Fixes#64634
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
