The NET_L2_ETHERNET_MGMT configuration option is required to allow
setting MAC address or PLCA parameters with the LAN865x driver.
To avoid mistakes with per-board configuration files - it has been moved
to Kconfig and automatically selected when the driver support is enabled.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Handle the situation when OA TC6 compliant device signals to the host
that its configuration is lost - i.e. the SYNC bit in the footer is
cleared.
In this (unlikely happen) situation the device is reset and reconfigured.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
As part of IRQ service routine, there is at least one data transmission
performed between OA TC6 compliant device and HOST uC.
As this transmission can happen when there is no valid data to be read
(and its only purpose is to deassert the interrupt) the DV bit in footer
may be cleared. As this situation is expected with this approach - the
LOG level can be safely lowered from error to debug.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
According to the OPEN Alliance 10Base-T1x standard (point 7.7), it is
mandatory to read at least single data chunk (no matter if received data
is valid or not) to deassert the interrupt in the LAN865x (then the tc6
structure fields are also updated from the footer).
Current approach with reading OA_BUFSTS register was providing the
required information (RCA and TXC), but could cause transmission "stalls"
as this operation (i.e. control, not data transmission) is not causing
deassertion of the interrupt IRQ_N line from OA TC6 compliant device.
With this patch - the transmission is always performed at least once, so
interrupt is always deasserted.
As the functionality of oa_tc6_update_buf_info() - i.e reading value of
RCA and TXC - has been replaced with extracting data from footer, this
function can be safely removed.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
In a previous change, STM32U5 GPDMA specific behavior was set into a
specific configuration applying only to few devices impacted by a specific
silicon erratum.
As part of this change, dma suspension before dma stop was set to apply
to the specific erratum workaround.
It appears, this was wrong and dma suspension before dma stop should
be done on all devices compatible with stm32u5 dma. This fix re-instantiate
the correct behavior.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Wakeup-source configuration is about configuring registers.
It belongs to uart_stm32_registers_configure().
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
To the instructions that install "foreign architecture" (i386)
packages on a x86-64 system, add the commands to ensure
the architecture is added if it wasn't already.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some modems or networks require PAP authentication for successful
LCP handshake. Tested on U-blox SARA-R5 with zephyr,gsm-ppp.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Add a library to the Nanopb test to demonstrate building with a
dependency on the generated header files.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Nanopb generates header files that need to be available before being
included. This isn't an issue for a target where the files were added
with zephyr_nanopb_sources. But if another target wants to include
these generated files we need a cmake dependency chain.
The nanopb_generated_headers custom target been added for this purpose.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Even though the ASCS Sink ASE state machine does not enter the disabling
state according to ASCS spec, it still makes sense to do so.
the state transition unit tests are updated to verify calling or not
calling the disable callback, depending on the transition of the state
fixes#63230
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This renames the I2C 'DCR' mode to 'LVR' as that is the variable it
should be looking at and not the dcr value. This also fixes the get
'lvr' mode argument.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
This removes all occurrences of arm,num-mpu-regions relying on the value
reported by the register instead.
A user may still define this property if they need to have a compile time
definition for it.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
The SSE-200 implementation on AN521 only has 8 regions.
Although the AN521 FPGA image implements the documented value,
qemu-system-arm currently shows in MPU_TYPE the incorrect value of 16.
Removing the property definition allows the code to rely on the register
read value and work on both qemu-system-arm & the physical board.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
The C code does not required this parameter to be defined and falls back
to the MPU_TYPE's register to return the appropriate value.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Note that native_sim is replacing native_posix as default
test platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Either switching to CAN_DEVICE_DT_INST_DEFINE with [1] missed
updating mcp251xfd or missed in merge. Fix using function
pointer for init in mcp251xfd.
[1]: https://github.com/zephyrproject-rtos/zephyr/pull/62925
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
The section overview list at the beginning of the document
is missing a few sections which were added after the list
was first created. So add them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The function _Cstart has already been renamed to z_cstart,
so change the remaining references of it in various docs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The stack object memory map was missing from the doc due to
incorrect indentation. Fix it so that it shows up in the doc.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is no need of repeating the same entries in a scope
that is supposed to extend another one.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
To align with other supported POSIX features, add logging to
pthread key to provide better error reporting and diagnostics.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Introduce minimal support for NXP UCANS32K1SIC board based on
S32K146 MCUs. This includes support to run from internal Flash or SRAM,
multiple west runners for TRACE32 and J-Link, and the minimal set of
drivers.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Introduce support for NXP S32K1 family of 32-bit MCUs, and
particularly for S32K146 devices. S32K1 share a fair amount of
similarities with Kinetis family, so most of the peripheral drivers
can be reused.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Switch from native_posix to native_sim as test platform
for this workflow.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as test platform
for this workflow.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Swith integration_platforms from native_posix(_64)
to native_sim(_64).
And replace it also in a comment.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
