Zero-functional change.
Also move it to a separate line so it's more convenient to temporarily
comment it out.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
CMake-based build systems like Zephyr's use separate build directories;
one for each build configuration. Even Zephyr's multi-build system
"sysbuild" (which is not relevant here) uses separate subdirectories.
So there is only one pre-processed, .toml file generated by build
directory and no need to vary its filename based on the platform name or
any other configuration parameter. It can and should keep the same
filename across build directories as zephyr.elf and all other build
artefacts do.
Moreover, when building a collection of configurations (as for instance
`sof/scripts/xtensa-build-zephyr.py` does), keeping all build
directories consistent with each other simplifies installation,
checksumming and any other post-processing.
"Fixes" recent commit 15336045af ("west: sign.py: generate platf.toml
from platf.toml.h with cc -E")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Physical boards work on these tests but some of the required
peripherals are not simulated by `renode`, executing the tests
with renode-simulated board in CI will fail.
Exclude `renode` simulation from these tests.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Changes to this file were missed out from the original
PR #65564 that added Renode support for this board, add them
here so that it gets ran in CI.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Enable FlexCAN peripheral driver for ucans32k1sic board. The GPIO-based
CAN transceiver driver is used to control the on-board CAN transceivers.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add message buffer allowed values for S32K1xx devices. Except S32K14xW
parts which supports 64 MBs, the rest of the parts support a maximum of
32 MBs.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
S32K1xx devices have a maximum of 3 FlexCAN peripherals. Each part may
define a different maximum number of instances and message buffers,
hence the interrupt lines are defined in the part specific dts.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The board uses pinctrl API. This commit updates pin USART pin definition
to be compliant with new API.
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
The board uses pinctrl API. This commit updates pin USART pin definition
to be compliant with new API.
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
Make sure some ROM libc calls are weak to allow
Zephyr's libc implementation instead.
Fixes#66351
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Adds common thread-local-storage.ld provided
by Zephyr. This also fixes a wrong xtensa_core entry
that should be riscv_core.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The entire switch statement is already wrapped in a lock which is
acquired just before configuring the gpio pin.
Signed-off-by: Yuval Peress <peress@google.com>
This board is similar to 'lora_e5_dev_board', but with smaller form-factor,
which makes it better suited as low volume prototype device.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Twister DeviceHandler now checks `--enable-coverage` command line argument
instead of `--coverage` when it deals with device output.
This resolves potential problem when only `--enable-coverage` argument
is given and the coverage report is not needed. In this case the test image
which is built for code coverage works slower also producing additional
console output, so the additional DeviceHandler timeout still have to be
applied and the output with coverage data correctly processed by Harness.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
It is useful for an application to be informed when there is
a subscriber waiting for HRS service notification.
Extend HRS service API and add required code to service implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Emitting network beacons in parallel to proxy functionality
causes collisions. The commit disables network beacons and
allows the test scenario to be more precise.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Alarm interrupt is disabled in cancel_alarm, we should re-enable it
in set_alarm, at meanwhile, should reset the compare register in
cancel_alarm to avoid the contention condition in
cancel_alarm & set_alarm in short time.
This change fixes the test case failure at
zephyr\tests\drivers\counter\counter_basic_api.
Signed-off-by: Bryan Zhu <bzhu@ambiq.com>
New hal_nordic revision contains nrfx 3.3.0 which adds support
for nRF54H20 EngA and nRF54L15 EngA devices.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
The zephyr-gpio w1 driver introduced in this commit implements
all routines for the w1 api on top of the zephyr gpio driver.
W1 bit read, write, and reset operations are executed by
bit-banging the selected gpio.
Signed-off-by: Hudson C. Dalpra <hudson@bduncanltd.com>
Store the compile-time computed length of the `irq_count` into
a variable so that we have less to do in runtime.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Change the index variable type to `int` from `size_t` to compile
across 32bit and 64bit platforms without generating warnings.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The RISCV32 Virtual board is a virtual platform made with
Renode as an alternative to QEMU. Contrary to QEMU, the
peripherals of this platform can be easily configured by
editing the `riscv32_virtual.repl` script and the devicetree
files accordingly, this allows certain hardware configurations
that only exist in proprietary boards/SoCs to be tested in
upstream CI.
Added another entry for this board to the excluded platform in
`kernel.timer.timer` test.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The PAN1783A-PA evaluation board is a development tool for the
nRF5340 from Nordic Semiconductor and the third evaluation
board variant for the PAN1783 Module. The power amplifier (PA)
version includes FEM support.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
When Power Management is enabled (CONFIG_PM=y),
the CONFIG_IDLE_STACK_SIZE of 320 is not enough :
Increase its size to 512.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The defconfig.series file for the stm32f4 incorrectly redefines
the PM Kconfig in order to select two dependencies, COUNTER and
COUNTER_RTC_STM32_SUBSECONDS, instead of setting a default for
them if PM is included.
This commit fixes the error described above.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The esp32c3 systimer has been fixed in PR #53453, but stamp_c3 was
not included, so we will update it to catch up with this fix
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Some STM32F4xx chips have an R division factor in PLL. Add possibility
to configure that.
Even though the output from the R division is not used, it can be
increased to reduce power consumption.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
This change adds support for enabling ethernet MAC hardware checksum
offloading for STM32H7 based devices.
In Section 58.5.9 of the STM32H7 reference manual it mentions that
the STM32H7 ethernet MAC supports a Checksum Offload Module (COE).
I have tested the changes on my end where I enabled
CONFIG_ETH_STM32_HW_CHECKSUM and ensured that an application that
runs Zephyr on the STM32H7 can interoperate with a device with a
completely different implementation. Also, I deliberately made
the software not populate the IPv4 and UDP header checksum fields
in their respective headers and the COE was able to populate the
IPv4 and UDP header checksums.
Given that CONFIG_ETH_STM32_HW_CHECKSUM is not enabled by default
application developers have the option to either enable it or
disable it.
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
Add the possibility to flash nucleo-l4r5zi board using west
STM32CubeProgrammer runner.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
Corrects the size of the external octoFlash connected to the
mcu of the stm32h573i disco kit from STMicroelectonics
Signed-off-by: Francois Ramu <francois.ramu@st.com>
