Solves two identical issues listed below:
Issue 1: I2C scanner example for DesignWare hardware gets stuck
indefenitely resulting in system hang up.This is because DW I2C driver
does not handle 0 byte transfer correctly which is the case for I2C
scan example.
Fixed it by overwriting the msg length to 1 if it is 0 and the
buffer is not NULL.
Issue 2: Similarly, if the I2C pins are not pulled up (nothing connected
to I2C pins), the DW hardware does not actually send the data
(assuming contention on the bus) hence not releasing the semaphore
resulting in calling thread waiting forever.
Fixed it by adding a timeout to k_sem_take call and return error if
cannot successfully acquire it.
Tested scenarios where nothing was connected on the bus and saw the
I2C scan example complete the whole scan command. Then connected
two different sensors on the I2C bus and saw both the address on the
console. Tested both the uses cases on Raspberry Pi Pico.
Fixes#70332.
Found that micropython tackles the same issue by implementing I2C scan
commands with Soft I2C because the same reason mentioned in Issue 1.
Signed-off-by: Dev Joshi <quic_devbhave@quicinc.com>
Fix ism330dhcx_gyro_fs_map[] and ism330dhcx_gyro_fs_sens[] arrays
initialization in order to be able to correctly convert from dps
to register raw value through the array index.
Fix: #72617
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Loop inside the odr array until we find the first
value which is "<=" (amd not "==") the argument.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
- Defined 'api_configure' function outside of
'CONFIG_UART_USE_RUNTIME_CONFIGURE' macro because it is the only
configuration function and used in device initialization function.
- Removed unnecessary 'IF_ENABLED' part.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Upgrade the CI image for x86 macos from 12 to 13, this is apparently the
latest "free" x86 macos runner that will be supported, let's switch to
it until it gets deprecated.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
There are 2-level switch statements (one switch inside another) which were
not properly terminated with 'break' statements, leading to implicit
fallthrough. Fix that.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The first page frame index was reserved for head and tail ^pointers.
However there are cases where the first frame is actually made
evictable and would trigger the assertion guarding against that.
Fix this by applying an offset to actual frame indexes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit makes the RV32M1 SoC rely on the default behavior of relying on
the `CONFIG_RISCV_ISA_EXT_*` config options, and removes the
`zephyr_compile_options` override when the standard toolchain is used.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
According to the RV32M1 Series Manual, Rev 1.1 RV32M1 series supports the C
extension, and doesn't support the A extension. Apply fixes accordingly.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Issue:
When there are two similar SSIDs (e.g. MySSID and MySSID_Guest),
the current implementation may use the wrong (truncated) SSID
for the connection. See issue#74910 for details.
Fix:
Updated airoc_wifi_scan_cb_search to filter all SSID where
length is different than the user-entered SSID.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
This introduces a high-level summary of the most notable changes in 3.7.
This also tries to capture the most useful changes since previous LTS.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This reverts commit a9a909c558.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 6f62292d42.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 86b92934cc.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 2d72966516.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 93973e2ead.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 49ac1912b2.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 305ec62a6b.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 581a0f56e6.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 48dff5562c.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 499a633976.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit d9855da483.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit b82b5b0734.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit be086f174c.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit b2243af32d.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 308322e9b9.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit b10f1ca3a6.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit b18cad15b9.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
This reverts commit e9b676a9ab.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
We only need the interface to be administratively up, the operationl
status is managed by the WPA supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Due to recent changes to hostap, the stack usage is increased, so,
increase the stack size to fix SoF.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fixes build issues when Wi-Fi security is enabled for default
implementation, the alternative implementation is managed separately,
and doesn't need these.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fixes an issue whereby multiple boards would be grouped when using
a regex to group them, and adds missing nRF91 entries to the list
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The power_down() function attempts to lock the hpsram_mask on-stack
variable in data cache, which causes an exception. Moving it to .bss
by making it static fixes it.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
During channel reads, zero is returned on CRC mismatches: the returned
error variable is not written to after a previous non-zero check. Return
-EIO to mirror other drivers' checksum validation behaviors.
Signed-off-by: Jared Kangas <kangas.jd@gmail.com>
The existing state checks for both the broadcast sink
and broadcast source only ever checked the first BIS.
This sort of made sense, since they are all linked by HCI
(i.e. they share the same state), but there is a race condition
in the ISO and BAP callbacks that could allow applications
to delete sinks and sources before all the ISO callbacks
had been handled.
By treating the sink and source states as the highest value
of the BIS, then we better treat all BIS the same.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit removes the const qualifier from TX (source) buffer
of the chan_blen_transfer DMA test to ensure it gets placed in
RAM rather than flash. This ensures the test can pass on hardware
where the DMA controller is unable to access flash.
Fixes#75125.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Make sure to check return values of mbedtls hmac APIs so that
the digest is calculated properly.
Fixes#75259Fixes#75260Fixes#75261
Coverity-CID: 366271
Coverity-CID: 366277
Coverify-CID: 366279
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The README "Testing CANopen Program Download" section needs a sysbuild
MCUboot option. Otherwise only the application is built and the test will
fail.
This has probably been missing since commit
238d113185.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Adds the icm42688 devicetree binding changes to the migration guide
noting that the previous bindings were not at all in use.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The gTest harness asssumed that the lines end with the test name, but
some gTest implementations include the test duration in the line. Update
both the tests and regex to allow this and also avoid capturing
characters into the `test_name` that cannot be valid test name chars.
Fixes#72318
Signed-off-by: Yuval Peress <peress@google.com>
